2 layers
Lab5 SMD
maxtk4/elec327finalproject
Our Final Project for ELEC 327, a robotic Payload for the SAE Aero Design Advanced Competition
14 parts
4 layers70.2 × 44.4 mm
Final project
maxtk4/elec327finalprojectOur Final Project for ELEC 327, a robotic Payload for the SAE Aero Design Advanced Competition
- Size
- 70.2 × 44.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 42
- Pads
- 124
- Tracks, vias
- 182, 37
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 May 2025
- Updated
- 14 May 2025
Overview
Final project is an open-source printed circuit board by maxtk4, from the maxtk4/elec327finalproject repository on GitHub. It is a 4-layer board of 70.2 × 44.4 mm with 42 parts on 42 nets, routed with 182 tracks and 37 vias.
It is built around the MSPM0G3507SDGS28R and TPS562200DDC. Its parts include 15 capacitors, 10 resistors, 6 connectors, 3 ICs and 2 switches.
Main components
2README
README.mdELEC 327 Final Project
Written to run on a custom PCB with an MSPM0G3507 through code composer studio. There is another README.txt file in the code repository which explains the code better.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C3, C6, C7, C12, C13 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4, R5, R8, R10 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C8, C10, C11 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C14, C15 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 2u | Inductor_SMD:L_Sunlord_SWPA8040S | L1, L2 |
| 2 | TPS562200 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | Battery_in | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J5 |
| 1 | Debug Connector | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | MSPM0G3507SDGS28R | ELEC327-Library:VSSOP28_DGS_TEX | IC1 |
| 1 | Neopixel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | POWER_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | START_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | dist_sensor_1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | dist_sensor_2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
More from maxtk4/elec327finalproject
1Similar boards
- 2 layers73 × 41 mm
Elec327final project
bennystrange/beat-saber
Beat Saber using custom joysticks, LED arrays and a MSPM0G3507 microcontroller
19 parts - 2 layers120 × 97 mm
SpinnyKittyCommittee
winsonlin8/SpinnyKittyCommittee
A rhythm-synchronized speaker system featuring a 3D-printed cat that spins and flashes RGB LEDs in time with music — inspired by this video.
90 partsMIT - 2 layers103 × 50 mm
- 2 layers40 × 78 mm
Hardware v2
rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
56 parts11 - 4 layers181.4 × 77.2 mm
NixieNTPClock
bastian-bou/NixieNTPClock
Nixie clock around ESP32 connected to a NTP server
64 parts3GPL-3.0 - 2 layers48.6 × 49.5 mm
Reaction wheel bldc motor control pcb
vatsalbansal123/reaction-wheel-controller-pcb
Open-source FOC motor controller PCB for a reaction wheel — STM32G431 + DRV8311H driving a BLDC motor, with CAN bus interface. Designed in KiCad.
50 parts3 - 6 layers75 × 135.2 mm
Dumpling Main
nyuad-space/dumpling
Modular payload for high-speed logging and benchmarking of COTS sensors, enabling real-world performance data and open sharing.
370 parts1 - 2 layers140 × 70 mm
Questions
How big is the Final project PCB?
It measures 70.2 × 44.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Final project use?
42 parts, built around the MSPM0G3507SDGS28R and TPS562200DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Final project KiCad files?
From the maxtk4/elec327finalproject repository on GitHub, at the commit this page was made from: the board is PCB/final_project.kicad_pcb and its schematic PCB/ELEC327-Library/Lab5_SMD_Smaller_Pot/Lab5_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Final project design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxtk4 before reusing the design.