2 layers121 × 75.5 mm
Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5
2 layers40 × 57 mm
KabelPeeler v1.1
MaxKiv/peeler_mouse1- Size
- 40 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 49
- Pads
- 177
- Tracks, vias
- 385, 23
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Sep 2025
- Updated
- 14 Jul 2026
Overview
KabelPeeler v1.1 is an open-source printed circuit board by MaxKiv, from the MaxKiv/peeler_mouse repository on GitHub. It is a 2-layer board of 40 × 57 mm with 56 parts on 49 nets, routed with 385 tracks and 23 vias.
It is built around the AMS1117-3.3, AMS1117-5.0 and TMC2209, with the AO3401A and FDV301N among its other parts. Its parts include 11 capacitors, 7 resistors, 6 connectors, 5 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
5
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTMC2209
UncategorisedTRINAMIC
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsFDV301N
SOT-23-55℃~+150℃ 1 N-channel 1.06V 1.3pF 220mA 25V 350mW 5Ω@2.7V 6pF 700pC@4.5V 9.5pF N-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP10, TP11 |
| 5 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP12, JP13, JP14, JP15, JP16 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C8, C9 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C7 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | MOSI/MISO | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP3 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2 |
| 2 | RX/TX Swap | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2, JP4 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP7, JP8 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C10 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C11 |
| 1 | 10nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | ADM3490ExR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Encoder | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4 |
| 1 | Ext Motor VCC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | FDV301N | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | LED-Output | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Limit switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | MS1 select | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP5 |
| 1 | MS2 select | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP6 |
| 1 | Main input | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | Motor VCC Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP11 |
| 1 | NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | Steppermotor | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | TMC2209 | TMC2208:MODULE_TMC2208_SILENTSTEPSTICK | U2 |
| 1 | XIAO-ESP32-S3-DIP | XIAO_Series_Footprints:XIAO-ESP32-S3-DIP | U1 |
Questions
How big is the KabelPeeler v1.1 PCB?
It measures 40 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KabelPeeler v1.1 use?
56 parts, built around the AMS1117-3.3, AMS1117-5.0, TMC2209 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KabelPeeler v1.1 KiCad files?
From the MaxKiv/peeler_mouse repository on GitHub, at the commit this page was made from: the board is schematics/cutting-head/.history/kabelPeeler v1.1.kicad_pcb and its schematic schematics/base-station/peeler_mouse_schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KabelPeeler v1.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MaxKiv before reusing the design.
Similar boards
- 4 layers68.6 × 53.3 mm
- 4 layers69.5 × 62.6 mm
Sensors Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
197 parts4 - 4 layers50 × 60 mm
- 2 layers100 × 75 mm
- 4 layers70.4 × 107.2 mm
- 2 layers48 × 37 mm
- 2 layers167.3 × 103 mm
Iw-8-controller
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
212 parts