4 layers38 × 39 mm
CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k
TMC2209
TRINAMIC
trinamic/TMC2209
- Category
- Uncategorised
- Pins
- 29
Overview
The TMC2209 is an uncategorised made by TRINAMIC with 29 pins.
PCBKit's library has its KiCad symbol (Celestial_Driver_Motor:TRINAMIC TMC2209, from Altium's library), ready for a KiCad board. 55 open-source boards in 42 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | OB2 | Passive |
| 2 | ENN | Passive |
| 3 | GND | Passive |
| 4 | CPO | Passive |
| 5 | CPI | Passive |
| 6 | VCP | Passive |
| 7 | SPREAD | Passive |
| 8 | 5VOUT | Passive |
| 9 | MS1_AD0 | Passive |
| 10 | MS2_AD1 | Passive |
| 11 | DIAG | Passive |
| 12 | INDEX | Passive |
| 13 | CLK | Passive |
| 14 | PDN_UART | Passive |
| 15 | VCC_IO | Passive |
| 16 | STEP | Passive |
| 17 | VREF | Passive |
| 18 | GND | Passive |
| 19 | DIR | Passive |
| 20 | STDBY | Passive |
| 21 | OA2 | Passive |
| 22 | VS | Passive |
| 23 | BRA | Passive |
| 24 | OA1 | Passive |
| 25 | GND | Passive |
| 26 | OB1 | Passive |
| 27 | BRB | Passive |
| 28 | VS | Passive |
| 29 | GND | Passive |
Open-source boards using it
All 55- 2 layers155 × 80 mm
- 4 layers80 × 70 mm
Jellyfish
wntrblm/jellyfish-and-starfish
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics.
172 parts112 - 2 layers76.2 × 69.9 mm
Startrckr pcb
NikodemBartnik/StarTrckr
Open source star tracker for deep sky astrophotography
59 parts98 - 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers48 × 40.9 mm
PicoMMUBoard
AdamTuraj/PicoMMU
A Klipper expansion board intended to run a MMU unit to control a stepper motor and servo.
35 parts13MIT - 2 layers184 × 80.5 mm
Prometheus PCB
TheContrappostoShop/Apollo
Control Board for the Prometheus mSLA Printer.
129 parts13CERN-OHL-S-2.0 - 4 layers100 × 123 mm
Duet3 5+ Ethernet
Duet3D/Duet3-Mini5plus
This repository also contains information in the Mini 2+ : a two driver expansion board for the Duet 3 mini 5+
461 parts12
Questions
Is there a KiCad symbol and footprint for the TMC2209?
Yes. The symbol is Celestial_Driver_Motor:TRINAMIC TMC2209, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the TMC2209?
55 boards in 42 repositories on GitHub; the most starred are listed on this page, with their KiCad files.