2 layers32.1 × 41.2 mm
Ir signalgen lite
dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool
40 parts58MIT
2 layers68.8 × 70 mm
TempController4Oven
maupassant9/TemperatureControllerForOvenTemperature Controller for oven with ESP8266
- Size
- 68.8 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 35
- Pads
- 105
- Tracks, vias
- 204, 119
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Jul 2023
- Updated
- 1 Nov 2026
Overview
TempController4Oven is an open-source printed circuit board by maupassant9, from the maupassant9/TemperatureControllerForOven repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.8 × 70 mm with 37 parts on 35 nets, routed with 204 tracks and 119 vias.
It is built around the STM8S003F3P6 and AMS1117-3.3. Its parts include 12 connectors, 8 resistors, 7 capacitors, 2 ICs and 1 diode. It belongs with the STM8 boards of this library.
Main components
2
STM8S003F3P6
TSSOP-20-40℃~+85℃ 10bit 128Byte 16 16MHz 1KB 2.95V~5.5V 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTemperatureControllerForOven
Temperature Controller for oven with ESP8266
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x01_Male | Connector_Pin:Pin_D1.3mm_L11.0mm | J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C6, C7 |
| 2 | 1.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J12 |
| 1 | 0.1uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 2SC4213 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | 3.6K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | Jack-DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
The 33 most common of 37 parts.
Questions
How big is the TempController4Oven PCB?
It measures 68.8 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TempController4Oven use?
37 parts, built around the STM8S003F3P6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TempController4Oven KiCad files?
From the maupassant9/TemperatureControllerForOven repository on GitHub, at the commit this page was made from: the board is TempController4Oven/TempController4Oven.kicad_pcb and its schematic TempController4Oven/TempController4Oven.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TempController4Oven design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers
Kvm base
thatoddmailbox/kvm-base
The main board for the open-source HDMI KVM switch I built.
70 parts19 - 2 layers72.8 × 32 mm
- 2 layers65 × 56 mm
Ras pi supercap ups
akuker/SuperUPS
This is a fork of the original Supercapacitor UPS board for a Raspberry Pi by Scott Baker, http://www.smbaker.com/
88 parts7 - 2 layers25.4 × 33 mm
- 2 layers26.4 × 18.8 mm
STM8S003F3
TLDR-Electronics/STM8S003F3_PCB_Breakout_and_C_examples
STM8S003F3 Breakout board and Simple STM8 C examples with the SDCC compiler
16 parts4MIT - 2 layers45 × 46 mm
Fan robot V3
Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.
52 parts - 2 layers21.8 × 26.9 mm
