matrixsmaster/doscard6DOSCARD is a DOS-in-a-box. This project contains two major parts: heavily modified DosBox fork as a software library, which can be embedded into any GUI or CLI application; and a set of embedded system projects which can run on MCUs.
Ginger2 is an open-source printed circuit board by matrixsmaster, from the matrixsmaster/doscard repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 69.5 × 57 mm with 61 parts on 87 nets, routed with 1,309 tracks and 76 vias.
It is built around the STM32F767IIT6, MT48LC16M16A2TG and FDN337N. Its parts include 24 capacitors, 15 resistors, 5 ICs, 5 connectors and 5 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitors_SMD:C_0805 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C15, C16, C23 |
| 6 | 10k | Resistors_SMD:R_0805 | R2, R3, R4, R21, R37, R49 |
| 3 | 1k | Resistors_SMD:R_0805 | R1, R5, R31 |
| 2 | 2.2u | Capacitors_SMD:C_0805 | C19, C20 |
| 2 | 20p | Capacitors_SMD:C_0805 | C13, C14 |
| 2 | 330 | Resistors_SMD:R_0805 | R32, R34 |
| 2 | 47u | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_Wave | C17, C18 |
| 2 | DNP | Resistors_SMD:R_0402 | R50, R52 |
| 1 | 0 | Resistors_SMD:R_0402 | R51 |
| 1 | 10n | Capacitors_SMD:C_0805 | C22 |
| 1 | 10u | Capacitors_SMD:C_0805 | C24 |
| 1 | 2.2uH | Resistors_SMD:R_0805 | L1 |
| 1 | 20MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 4.7u | Capacitors_SMD:C_0805 | C21 |
| 1 | 510 | Resistors_SMD:R_0805 | R6 |
| 1 | B1 | Buttons_Switches_ThroughHole:SW_Tactile_SPST_Angled | SW5 |
| 1 | B2 | Buttons_Switches_ThroughHole:SW_Tactile_SPST_Angled | SW4 |
| 1 | B3 | Buttons_Switches_ThroughHole:SW_Tactile_SPST_Angled | SW3 |
| 1 | B4 | Buttons_Switches_ThroughHole:SW_Tactile_SPST_Angled | SW2 |
| 1 | BAT | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | FDN337N | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | LD1 | Resistors_SMD:R_1210 | D1 |
| 1 | LD2 | Resistors_SMD:R_1210 | D2 |
| 1 | LM3671MF-FIX | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | LOGO | girl:LOGO | G*** |
| 1 | LP2985LV | TO_SOT_Packages_SMD:SOT-23-5 | U5 |
| 1 | MT48LC16M16A2 | tsop-54:TSOP-54 | U1 |
| 1 | PWR | Resistors_SMD:R_1210 | D3 |
| 1 | RST | button_bourns:but_7914G | SW1 |
| 1 | STM32F767IIT6 | Housings_QFP:LQFP-176_24x24mm_Pitch0.5mm | U2 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | USB_HOST | Connect:USB_A | P2 |
| 1 | WF24HTLAJDNN0 | TFT-WF24HTLAJDNN:FPC_39 | U3 |
| 1 | microSD | molex sd slot 2:microSD | P4 |
It measures 69.5 × 57 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the STM32F767IIT6, MT48LC16M16A2TG and FDN337N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the matrixsmaster/doscard repository on GitHub, at the commit this page was made from: the board is Embedded-Light/Hardware/f7-ginger2/ginger2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
matrixsmaster/doscard
DOSCARD is a DOS-in-a-box. This project contains two major parts: heavily modified DosBox fork as a software library, which can be embedded into any GUI or CLI application; and a set of embedded system projects which…
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
