4 layers177 × 110 mm
4 layers20 × 74.3 mm
Flicker
danfoisy/flicker38Flicker is a spherical display based on persistence of vision.
- Size
- 20 × 74.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 499
- Nets
- 1,018
- Pads
- 3,115
- Tracks, vias
- 10,278, 2,413
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Dec 2020
- Updated
- 28 Jan 2025
Overview
Flicker is an open-source printed circuit board by danfoisy, from the danfoisy/flicker repository on GitHub, published under the MIT licence. It is a 4-layer board of 20 × 74.3 mm with 499 parts on 1,018 nets, routed with 10,278 tracks and 2,413 vias.
It is built around the 10CL010YE144C8G, EP53A7LQI and EP53F8QI, with the OKL2-T/12-W12P2-C, TLC5955DCA and SI53365-B-GT among its other parts. Its parts include 176 capacitors, 29 ICs, 18 resistors, 3 connectors and 2 diodes.
Main components
1010CL010YE144C8G
EQFP-144(20x20)0℃~+85℃ 1.2V 10320 423936bit 645 88 Cyclone 10 LP Supports hot swap、Supports SEU error detection and correction EQFP-144(20x20) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)EP53A7LQI
QFN-16(3x3)1 1A 2.4V~5.5V 600mV~5V 94% QFN-16(3x3) DC-DC Power Modules ROHSIntel/AlteraDC-DC Power Modules
EP53F8QI
QFN-16(3x3)-40℃~+125℃ 1 1.1mm 1.5A 2.4V~5.5V 3mm 3mm 4MHz 600mV~4.96V 8mVp-p 94% Short Circuit Protection、Overheat Protection、Over Current Protection、Under Voltage Protection、Programmable output voltage Step-down type ±2% QFN-16(3x3) DC-DC Power Modules ROHSIntel/AlteraDC-DC Power ModulesOKL2-T/12-W12P2-C
SMD-10P-40℃~+85℃ 1 1000uF 11.43mm 12A 20.32mm 20mVp-p 4.5V~14V 400kHz 60W 690mV~5.5V 8.55mm 95% Short Circuit Protection、Over Current Protection、Under Voltage Protection、Over-temperature protection、Automatic fault recovery、External clock synchronization、Remote sampling compensation、Dynamic voltage scaling、Power-on timing control SMD-10P DC-DC Power Modules ROHSMurataIsolated Power Modules
TLC5955DCA
HTSSOP-56-6.1mm-40℃~+85℃ 25MHz~33MHz 34.7mA 3V~5.5V 48 5% PWM HTSSOP-56-6.1mm LED Drivers ROHSTexas InstrumentsLED Drivers
SI53365-B-GT
TSSOP-16Clock Buffers, Drivers, DistributorsSkyworks Solutions
TFP401APZP
TQFP-100(14x14)0℃~+70℃ 1.65Gbps 3V~3.6V Receiver TQFP-100(14x14) Video Interface ICs ROHSTexas InstrumentsVideo Interface ICs
MIC5504-2.5YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 175uVrms 2.5V 300mA 380mV@(300mA) 5.5V 55uA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MT48LC16M16A2TG
TSOP-54TSOP-54 DRAM ROHSMicron TechDRAM
LTST-C19HE1WT
1.6x1.6mm-20℃~+80℃ 0.35mm 1.6mm 1.6mm 1.8V~2.4V 112mcd~450mcd 130° 2.8V~3.9V 2.8V~3.9V 20mA 20mA 20mA 28mcd~180mcd 45mcd~180mcd 468nm 470nm 520nm 525nm 624nm 632nm 75mW 80mW 80mW Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSLite-OnLight Emitting Diodes (LED)
README
README.mdFlicker
Flicker is a spherical display based on persistence of vision.
- docs : Contains a summary of the project
- board : Contains the schematics and PCB layout
- prints : has all the STL files for the 3D printed parts
- FPGA : contains all the FPGA code
More information about the project can be found here.
Parts
499| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | LTST-C19HE1WT | flicker:LTST-C19HE1WT | DP1001, DP1002, DP1003, DP1004, DP1005, DP1006, DP1007, DP1008, DP1009, DP1010, DP1011, DP1012, DP1013, DP1014, DP1015, DP1016 +240 |
| 75 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_HandSolder | C104, C105, C106, C107, C108, C109, C110, C111, C112, C115, C116, C1004, C1009, C1104, C1109, C1204 +59 |
| 48 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101, C102, C103, C113, C114, C202, C205, C208, C1003, C1008, C1103, C1108, C1203, C1208, C1313, C1314 +32 |
| 32 | 22uF | Capacitor_SMD:CP_Elec_4x5.4 | C501, C505, C506, C510, C1001, C1005, C1006, C1010, C1101, C1105, C1106, C1110, C1201, C1205, C1206, C1210 +16 |
| 16 | TLC5955 | Package_SO:HTSSOP-56-1EP_6.1x14mm_P0.5mm_EP3.61x4.7mm | U501, U502, U601, U602, U701, U702, U801, U802, U901, U902, U1001, U1002, U1101, U1102, U1201, U1202 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric_HandSolder | R101, R102, R202, R203, R205, R206, R208, R401 |
| 6 | 22uF, 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C401, C402, C418, C419, C1307, C1308 |
| 6 | 300R | Resistor_SMD:R_0402_1005Metric_HandSolder | FB201, FB202, FB401, FB402, FB403, FB404 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1305, C1306, C1310, C1312 |
| 3 | 1.0K | Resistor_SMD:R_0402_1005Metric_HandSolder | R204, R207, R211 |
| 3 | SI53365 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U101, U102, U103 |
| 3 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_bridged12 | JP201, JP401, JP402 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1309, C1311 |
| 2 | 22uF, 25V | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1302, C1303 |
| 2 | 330R | Resistor_SMD:R_0402_1005Metric_HandSolder | R201, R209 |
| 2 | 330pF | Capacitor_SMD:C_0402_1005Metric_HandSolder | C117, C118 |
| 2 | DRV5013 | Package_TO_SOT_THT:TO-92Flat-R | U104, U105 |
| 1 | 1.5KExxA | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D1301 |
| 1 | 1.6K | Resistor_SMD:R_0402_1005Metric_HandSolder | R1301 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric_HandSolder | R1303 |
| 1 | 100uF, 10V | Capacitor_SMD:CP_Elec_6.3x5.4 | C1304 |
| 1 | 100uF, 25V | Capacitor_SMD:CP_Elec_6.3x7.7 | C1301 |
| 1 | 10CL010YE144C8G | Package_QFP:EQFP-144-1EP_20x20mm_P0.5mm_EP6.7x6.7mm | U201 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric_HandSolder | R1302 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric_HandSolder | C1316 |
| 1 | 237K | Resistor_SMD:R_0402_1005Metric_HandSolder | Ree |
| 1 | 24R9 | Resistor_SMD:R_0402_1005Metric_HandSolder | R210 |
| 1 | 5.0pF | Capacitor_SMD:C_0402_1005Metric_HandSolder | C1317 |
| 1 | 52.67K | Resistor_SMD:R_0402_1005Metric_HandSolder | R1305 |
| 1 | 680pF | Capacitor_SMD:C_0402_1005Metric_HandSolder | C1315 |
| 1 | ASE-10MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X201 |
| 1 | EP53A7LQI | flicker:EP53A7LQI | U1303 |
| 1 | EP53F8QI | flicker:EP53A7LQI | U1302 |
| 1 | EPCQ16A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U202 |
| 1 | HDMI_A | Connector_HDMI:HDMI_A_TE_5-1903015-5 | J401 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_Shrouded | J201 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D201 |
| 1 | MIC5504-2.5YM5 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1304 |
| 1 | MT48LC16M16A2 | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U301 |
| 1 | OKL2-T_12-W12 | flicker:OKL2-T-12-W12 | U1301 |
| 1 | Power In | Connector_Molex:Molex_70555_RA_1x02_P2.54 | J1301 |
| 1 | RaspberryPiA+ | Module:RaspberryPi3A+ | SBC1402 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_MountingHoles | SBC1401 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_KMR2 | SW201 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_bridged | JP1301 |
| 1 | TFP401A | Package_QFP:TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm | U401 |
Questions
How big is the Flicker PCB?
It measures 20 × 74.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Flicker use?
499 parts, built around the 10CL010YE144C8G, EP53A7LQI, EP53F8QI and OKL2-T/12-W12P2-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flicker KiCad files?
From the danfoisy/flicker repository on GitHub, at the commit this page was made from: the board is board/flicker/flicker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flicker design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers160 × 90 mm
- 2 layers
- 2 layers136 × 92 mm
BB3plus DVID TFT display
eez-open/eez-bb3plus
EEZ Bench Box 3 Plus (BB3+) Modular T&M chassis
89 parts13 - 4 layers98 × 90 mm
- 2 layers206.4 × 187.1 mm
Christmas Tree Disco
Cryochasm/christmas-tree-disco-hw
KiCAD project for a Christmas Tree decoration.
138 partsMIT - 2 layers136 × 76 mm
LEDbacklight
JasonLiJT/HDR-backlight-PCB
The KiCad library and project of the PCB design for a 6-inch HDR LED backlight.
177 parts - 4 layers149 × 149 mm
