Skip to the content
2 layersPcb design, the printed circuit board in 3D

Budget bioreactor

Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
58
Pads
127
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
3 Sep 2022
Updated
12 Jan 2026

Overview

Pcb design is an open-source printed circuit board by Matijasa, from the Matijasa/bio-reactor repository on GitHub. It is a 2-layer board with 26 parts on 58 nets.

It is built around the RJ45. Its parts include 9 connectors, 7 resistors, 4 ICs, 4 transistors and 1 capacitor. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

doc/src/pages/index.md

Parts

26
QtyValueFootprintReferences
410kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R8, R9, R10
2MT3203_heaterPackage_TO_SOT_THT:TO-220-3_VerticalQ4, Q5
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
12k2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
14k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
1ADW11Relay_THT:Relay_1P1T_NO_10x24x18.8mm_Panasonic_ADW11xxxxW_THTK2
1C 16V 100nFCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mmC1
1ESP32-DEVKIT-V1local_lib:MODULE_ESP32_DEVKIT_V1U4
1IRF3205_bublerPackage_TO_SOT_THT:TO-220-3_VerticalQ2
1IRF3205_heaterPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1Power_transfer_cable_mainTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ4
1Power_transfer_cable_slaveTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ9
1RJ45Connector_RJ:RJ45_OST_PJ012-8P8CX_VerticalJ7
1Screw_Terminal_AC_PowerTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ3
1Screw_Terminal_BublerTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ8
1Screw_Terminal_DC_PowerTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ5
1Screw_Terminal_HeaterTerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mmJ2
1Screw_Terminal_MotorTerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mmJ1
1TMC2209_stepper_driverlocal_lib:MODULE_TMC2209_SILENTSTEPSTICKU3
1rj45_mainConnector_RJ:RJ45_OST_PJ012-8P8CX_VerticalJ6
1step_down_converterlocal_lib:YAAJ_DCDC_StepDown_LM2596U2
1temperature sensorTerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mmU1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layers73.9 × 84.5 mmAei, the printed circuit board in 3D

    Aei

    Severson-Group/AMDC-Hardware

    Circuit board designs for controlling advanced motor systems

    54 parts51
  • 2 layers99 × 60 mmPwr, the printed circuit board in 3D

    Pwr

    mfkiwl/KiwiSDR_PCB

    KiCAD PCB files for KiwiSDR project including active antenna and bias tee

    64 parts46

Questions

What parts does the Pcb design use?

26 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb design KiCad files?

From the Matijasa/bio-reactor repository on GitHub, at the commit this page was made from: the board is pcb-design/pcb-design.kicad_pcb and its schematic pcb-design/bubler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb design design in my own project?

Its repository states no licence, so its author keeps all rights: ask Matijasa before reusing the design.