
Robotica
MatiasCH4iman/workshop-projects
Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.

Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.
RoboticaV2 is an open-source printed circuit board by MatiasCH4iman, from the MatiasCH4iman/workshop-projects repository on GitHub. It is a 2-layer board of 163 × 121.5 mm with 27 parts on 45 nets, routed with 312 tracks and 19 vias.
It is built around the XT60-M. Its parts include 3 diodes, 2 capacitors, 2 resistors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
🧰 Workshop Projects
Repositorio que reúne mis proyectos personales y académicos de programación, electrónica e IoT. Cada carpeta contiene un proyecto independiente con su código, documentación técnica, esquemáticos y archivos de diseño.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | INFR1, INFR2, US1, US2, US3 |
| 4 | , , , | ||
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | BTS7960_A1, BTS7960_B1 |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | MOTA1, MOTAB1 |
| 1 | 0.1µF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 0.33µF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | LM7809_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LOGO | Images:mecalogo | G*** |
| 1 | SW1 TIEMPO | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW2 |
| 1 | SW2 | Switch_Keyboard_Kailh:SW_Kailh_KH | SWSTRAT1 |
| 1 | SW_DPDT_x2 | footprint:SW-TH_SS-12F44-GX | SW1 |
| 1 | XT60-M | XT60-M:AMASS_XT60-M | J1 |

MatiasCH4iman/workshop-projects
Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.

MatiasCH4iman/workshop-projects
Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.

MatiasCH4iman/workshop-projects
Repository containing my personal programming projects, including scripts, web applications, and electronics projects. Each folder contains a different project with its corresponding documentation.

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.


edromufu/edromufu
Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.


kairobyte/bipedal_self_balance
A bipedal self balancing robot with 2DOF in each leg. Built from scratch.


KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.
It measures 163 × 121.5 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MatiasCH4iman/workshop-projects repository on GitHub, at the commit this page was made from: the board is 2025-PLACAROBOTICA/Robotica/Robotica v2/RoboticaV2.kicad_pcb and its schematic 2025-PF_CHAIMAN_CONSUEGRA_DAGOTTO_SCHAJRIS-main/Placa/PlacaPF2/PlacaPf.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MatiasCH4iman before reusing the design.