
Rpi pico printer board
jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

Repository for tasks assigned during AGH-SS recruitment
AP63300 is an open-source printed circuit board by martvicz, from the martvicz/mv-SS-AGH repository on GitHub. It is a 2-layer board of 30 × 30 mm with 14 parts on 6 nets, routed with 51 tracks and 4 vias.
It is built around the AP63300WU, CC0603KRX7R7BB104 and RK73H1JTTD3012F, with the PH1-03-UA among its other parts. Its parts include 5 capacitors, 2 resistors, 1 IC, 1 connector and 1 inductor.
Here is my work for the second phase of admissions to the AGH Space Systems. I only completed 2 tasks, but I hope it is enough! The answers to the tasks were uploaded as 2 separate directories:
Contains answers relating to the AP63300 converter module task, including the KiCad project files, the report, and the images used in the report.
Contains answers relating to the LED Blinker task (the entire STM32 CMake project)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22μF | Capacitor_SMD:C_1210_3225Metric | C21, C22 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10μF | Capacitor_SMD:C_1210_3225Metric | C1 |
| 1 | 158kΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 30.1kΩ | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 6.8μH | Inductor_SMD_Wurth:L_Wurth_WE-PD2A-7850 | L1 |
| 1 | AP63300 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
The 10 most common of 14 parts.

jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project


RemkoPr/airo-halberd
The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.




It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the AP63300WU, CC0603KRX7R7BB104, RK73H1JTTD3012F and PH1-03-UA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the martvicz/mv-SS-AGH repository on GitHub, at the commit this page was made from: the board is Task_1.1/KiCad Files/AP63300.kicad_pcb and its schematic Task_1.1/KiCad Files/AP63300.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask martvicz before reusing the design.