2 layers281 × 76.2 mm
Treadstone48
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
125 parts193MIT
2 layers95.3 × 95.3 mm
Rhymestone
marksard/Keyboards193This repository is warehouse of my keyboard architecture.
- Size
- 95.3 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 69
- Pads
- 614
- Tracks, vias
- 2,026, 235
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Dec 2018
- Updated
- 17 Aug 2024
Overview
Rhymestone is an open-source printed circuit board by marksard, from the marksard/Keyboards repository on GitHub, published under the MIT licence. It is a 2-layer board of 95.3 × 95.3 mm with 88 parts on 69 nets, routed with 2,026 tracks and 235 vias.
It is built around the SK6812MINI-E. Its parts include 20 diodes, 20 switches, 20 inductors, 5 connectors and 2 resistors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKeyboards
This repository is warehouse of my keyboard architecture.
About Firmware
Release firmware
Keymap editing web service REMAP
WARNING
Note that for these keyboards, the design is older and also less likely to support the latest firmware and architecture.
Also, KICAD files may be incomplete, they are not going to be perfect.
Rhymestone
About Rhymestone
The Rhymestone is 40-key (40%) ortholinear keyboard. It is based on The crkbd and The Helix keyboard. Thank you so much makoto kurauchi-san and foostan-san.😊
Build guide
Firmware
Hardware data
Treadstone48
rev1
rev2
About Treadstone48
The Treadstone48 is 47 or 48-key (50%) Symmetric staggered keyboard. It is based on the Rhymestone. Therefore, The Rhymestone can connect to the Treadstone48 as Numpad or lefthand keyboard. (rev1 only)
This Symmetrical Staggered is designed to be easy to use in a natural posture and easy for your fingers to reach.
And more one topic, this key arrangement can use general ansi 104 keycaps.
Build guide
Build guide (En)
Firmware
Hardware data
About Treadstone48
Case design sample
Stonehenge30 (deprecated)
About Stonehenge30
The Stonehenge30 is 30-key (30%) Symmetric staggered keyboard. It is based on the Treadstone48. And it is thumb-less (not use thumb) keyboard of prototype.
Build guide
Firmware
Hardware data
About Stonehenge30
Case design sample
Treadstone32
rev1
lite
About Treadstone32
The Treadstone32 is 32-key (30%) Symmetric staggered keyboard. It is based on the Treadstone48 and the Stonehenge30.
This keyboard is removing dedicated modifire-key from the Treadstone48 for more compact. But 2 thumb-key is left same as Treadtone48.
Build guide (lite)
Build guide
Build guide (En)
Firmware
Hardware data
About Treadstone32
Treadstone60
About Treadstone60
The Treadstone60 is 59-62key (60%) Symmetric staggered keyboard. It is based on the Treadstone48 and the Treadstone32.
Leftover30
About Leftover30
The Leftover30 is 34-36key (30%) Row staggered keyboard. This project was created by marksard, yohewi and hdbx.
Troubleshooting
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | D | kbd:D3_SMD | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 20 | SK6812MINI | kbd:SK6812MINI_rev | L1, L2, L3, L4, L5, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20 +4 |
| 20 | SW_PUSH | kbd:CherryMX_Hotswap | SW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +4 |
| 8 | kbd:Jumper | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 | |
| 4 | hole | kbd:LEGO_HOLE | h1, h2, h3, h4 |
| 2 | R | kbd:R_TH | R1, R2 |
| 2 | hole | kbd:LEGO_HOLE2 | h7, h8 |
| 1 | AUX | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Columns | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | DataJP | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP10 |
| 1 | LED | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP9 |
| 1 | LOGO | kbd:Rhymestone_logo | G*** |
| 1 | MJ-4PP-9 | kbd:MJ-4PP-9 | J1 |
| 1 | OLED | kbd:OLED | J3 |
| 1 | ProMicro | kbd:ProMicro_v2 | U1 |
| 1 | Reset | kbd:ResetSW | RSW1 |
| 1 | Rows | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | SDAJP | kbd:Jumper | JP12 |
| 1 | SDLJP | kbd:Jumper | JP11 |
Questions
How big is the Rhymestone PCB?
It measures 95.3 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rhymestone use?
88 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rhymestone KiCad files?
From the marksard/Keyboards repository on GitHub, at the commit this page was made from: the board is rhymestone/pcb/rev1.0/Rhymestone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rhymestone design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from marksard/Keyboards
3- 2 layers198.8 × 75.6 mm
Treadstone32
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
85 parts193MIT - 2 layers219.1 × 66.7 mm
Stonehenge30
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
80 parts193MIT
Similar boards
- 4 layers234 × 84 mm
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
234 parts3kApache-2.0 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
106 parts575GPL-2.0 - 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
62 parts517GPL-2.0 - 4 layers82.5 × 39.4 mm
V4head
makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.
26 parts493GPL-3.0 - 2 layers115.7 × 95.7 mm
- 4 layers70 × 54 mm
