
Switch Board
Manul-Electronics/M-Sens
M-Sens is a wireless module who can measure temperature and relative humidity in a room

M-Sens is a wireless module who can measure temperature and relative humidity in a room
Sensor Board is an open-source printed circuit board by Manul-Electronics, from the Manul-Electronics/M-Sens repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 15.1 × 11.6 mm with 3 parts on 4 nets, routed with 27 tracks and 0 vias.
It is built around the HTU21DF. Its parts include 1 capacitor, 1 IC and 1 connector. It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 boards of this library.
M-Sens is a family of Open Source and Open Hardware sensors.
For now on this family includes the following devices :
Other devices could join the family in the future but as I work alone it could be in a very long time.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 68610414422 | manul_tech:68610414422 | J1 |
| 1 | HTU21DF | manul_tech:HTU21DF | U1 |

Manul-Electronics/M-Sens
M-Sens is a wireless module who can measure temperature and relative humidity in a room


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
It measures 15.1 × 11.6 mm and has 2 copper layers, 0.4 mm thick.
3 parts, built around the HTU21DF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Manul-Electronics/M-Sens repository on GitHub, at the commit this page was made from: the board is Hardware/Sensor Board/Sensor Board.kicad_pcb and its schematic Hardware/Sensor Board/Sensor Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).