2 layers45 × 45 mm
2 layers31.4 × 25.7 mm
Amp200
Maniak003/Anemometer20Ultrasonic anemometer
- Size
- 31.4 × 25.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 28
- Pads
- 128
- Tracks, vias
- 1,091, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2022
- Updated
- 30 Jun 2024
Overview
Amp200 is an open-source printed circuit board by Maniak003, from the Maniak003/Anemometer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31.4 × 25.7 mm with 56 parts on 28 nets, routed with 1,091 tracks and 13 vias.
It is built around the MAX4477AUA+ and TS5A23159DGSR. Its parts include 18 connectors, 13 capacitors, 11 resistors, 6 diodes and 4 transistors.
Main components
2
MAX4477AUA+
MSOP-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 10MHz 115dB 1pA 1pA 2 2.2mA 2.7V~5.5V 300nV/℃ 3V/us 4.5nV/√Hz@1kHz 70uV 80mA Built-in compensation Rail-to-rail output MSOP-8 Operational Amplifier ROHSMaxim Integrated (Analog Devices)Operational Amplifier
TS5A23159DGSR
VSSOP-10-0.5mm-40℃~+85℃ 1.1Ω 1.65V~5.5V 100MHz 15ns 2 20ns 2:1 VSSOP-10-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdParts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Conn | My-library:SMD-CONN | J1, J2, J3, J4, J5, J7, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19 +2 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R11, R12, R13, R14 |
| 5 | .1u | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C6, C13 |
| 4 | BZ55C2V7 | Diode_SMD:D_MiniMELF | D4, D5, D6, D7 |
| 4 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C7, C15 |
| 2 | TS5A23159DGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U1, U3 |
| 1 | 1.5n | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1000u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C11 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 3M | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 470u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C8 |
| 1 | 47u | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AD5245 | Package_TO_SOT_SMD:SOT-23-8 | D2 |
| 1 | MAX4477 | Package_SO:MSOP-8_3x3mm_P0.65mm | D1 |
| 1 | NCP1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
Questions
How big is the Amp200 PCB?
It measures 31.4 × 25.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Amp200 use?
56 parts, built around the MAX4477AUA+ and TS5A23159DGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp200 KiCad files?
From the Maniak003/Anemometer repository on GitHub, at the commit this page was made from: the board is kicad/Amp200_2/Amp200.kicad_pcb and its schematic kicad/Anemometer_200_G473/Anemometer_200_G473.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp200 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Maniak003/Anemometer
10- 2 layers45 × 45 mm
- 2 layers23.3 × 37.9 mm
- 2 layers45 × 45 mm
- 2 layers46.1 × 54.3 mm
- 2 layers30.2 × 29 mm
- 2 layers30 × 25.6 mm
- 2 layers25.4 × 15.9 mm
- 2 layers9 × 6.9 mm
- 2 layers7.8 × 4.5 mm
Similar boards
- 2 layers75.7 × 37.4 mm
Spectrometer
atx/spectrometer
Alpha spectrometer developed during my internship at the Institute at the Experimental and Applied Physics
270 parts2MIT - 2 layers63.1 × 45 mm
- 2 layers139.7 × 41.9 mm
Kstat mainboard
nfroehberg/GlazerLab_KStat
Firmware, PCB design and Python interface for the KStat potentiostat developed in the Glazer Lab, University of Hawaii.
121 parts - 4 layers144.3 × 143.8 mm
- 4 layers155 × 103 mm
- 4 layers62.9 × 88.6 mm
Bit block
Citrullin/Sovereign_Bunny_Stack
From web 3 unicorn fantasy to federated web 2.5 reality.
169 parts4 - 2 layers70 × 140 mm
FreeBot main v1.1b
KULeuven-CapBot/ICRA2025_BatteryFreeRobot
CapBot's hardware is designed using KiCad, the design files are provided under HardwareDesign.
194 parts3 - 2 layers100 × 90 mm
