2 layers45 × 45 mm
2 layers30 × 25.6 mm
Ultrasonic anemometer
- Size
- 30 × 25.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 17
- Pads
- 71
- Tracks, vias
- 182, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Jan 2022
- Updated
- 30 Jun 2024
Overview
Amp is an open-source printed circuit board by Maniak003, from the Maniak003/Anemometer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 25.6 mm with 31 parts on 17 nets, routed with 182 tracks and 5 vias.
It is built around the MAX4477AUA+, TS5A3166DBVR-TP and TLV3501AID. Its parts include 10 capacitors, 10 resistors, 5 connectors, 2 ICs and 2 diodes. It belongs with the audio and music boards of this library.
Main components
3
MAX4477AUA+
MSOP-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 10MHz 115dB 1pA 1pA 2 2.2mA 2.7V~5.5V 300nV/℃ 3V/us 4.5nV/√Hz@1kHz 70uV 80mA Built-in compensation Rail-to-rail output MSOP-8 Operational Amplifier ROHSMaxim Integrated (Analog Devices)Operational Amplifier
TS5A3166DBVR-TP
SOT-23-5Analog Switches, MultiplexersTECH PUBLIC
TLV3501AID
SOIC-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 1 1mV 2.7V~5.5V 2pA 2pA 3.2mA 4.5ns 5.5V 55dB 6mV Enable/shutdown function、Overvoltage protection Push-pull Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS SOP-8 Comparators ROHSTexas InstrumentsComparators
README
README.mdParts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn | My-library:SMD-CONN | J1, J2, J3, J4, J5 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R3, R4, R7, R9 |
| 3 | .1uF | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R6, R10 |
| 2 | 1.5n | Capacitor_SMD:C_0402_1005Metric | C2, C6 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 390k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 47uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | MAX4477 | Package_SO:MSOP-8_3x3mm_P0.65mm | D1 |
| 1 | MCP1700 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MCUSD18A40B12RS | My-library:MCUSD18A40B12RS | Z1 |
| 1 | TLV3501 | Package_TO_SOT_SMD:SOT-23-6 | D2 |
| 1 | TS5A3166DBVR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
Questions
How big is the Amp PCB?
It measures 30 × 25.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Amp use?
31 parts, built around the MAX4477AUA+, TS5A3166DBVR-TP and TLV3501AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp KiCad files?
From the Maniak003/Anemometer repository on GitHub, at the commit this page was made from: the board is kicad/Amp/Amp.kicad_pcb and its schematic kicad/Anemometer_200_G473/Anemometer_200_G473.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Maniak003/Anemometer
10- 2 layers45 × 45 mm
- 2 layers23.3 × 37.9 mm
- 2 layers45 × 45 mm
- 2 layers46.1 × 54.3 mm
- 2 layers31.4 × 25.7 mm
- 2 layers30.2 × 29 mm
- 2 layers25.4 × 15.9 mm
- 2 layers9 × 6.9 mm
- 2 layers7.8 × 4.5 mm
Similar boards
- 2 layers38.7 × 19.9 mm
- 2 layers75.7 × 37.4 mm
Spectrometer
atx/spectrometer
Alpha spectrometer developed during my internship at the Institute at the Experimental and Applied Physics
270 parts2MIT - 2 layers139.7 × 41.9 mm
Kstat mainboard
nfroehberg/GlazerLab_KStat
Firmware, PCB design and Python interface for the KStat potentiostat developed in the Glazer Lab, University of Hawaii.
121 parts - 2 layers22.5 × 41.1 mm
Color computer dac
qbancoffee/coco_daiquiri
A board that replaces the functionality of the SC77526 DAC chip in the Tandy CoCo's
18 parts7GPL-3.0 - 2 layers21.7 × 12.7 mm
- 4 layers350.9 × 183.2 mm
- 2 layers56.6 × 62.2 mm
ArduinoR3
Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.
59 parts - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0