

Amp200
Ultrasonic anemometer
- Size
- 30.2 × 29 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 24
- Pads
- 101
- Tracks, vias
- 853, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2022
- Updated
- 30 Jun 2024
Overview
Amp200 is an open-source printed circuit board by Maniak003, from the Maniak003/Anemometer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30.2 × 29 mm with 44 parts on 24 nets, routed with 853 tracks and 12 vias.
It is built around the MAX4477AUA+, TLV3501AID and TS5A4595DBV, with the X9C103P among its other parts. Its parts include 16 capacitors, 10 resistors, 10 connectors, 4 diodes and 2 ICs.
Main components
4MAX4477AUA+
MSOP-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 10MHz 115dB 1pA 1pA 2 2.2mA 2.7V~5.5V 300nV/℃ 3V/us 4.5nV/√Hz@1kHz 70uV 80mA Built-in compensation Rail-to-rail output MSOP-8 Operational Amplifier ROHSMaxim Integrated (Analog Devices)Operational AmplifierTLV3501AID
SOIC-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 1 1mV 2.7V~5.5V 2pA 2pA 3.2mA 4.5ns 5.5V 55dB 6mV Enable/shutdown function、Overvoltage protection Push-pull Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS SOP-8 Comparators ROHSTexas InstrumentsComparatorsTS5A4595DBV
SOT-23-5-40℃~+85℃ 1 13pF 14ns 17ns 1:1 2.7V~5.5V 450MHz 8Ω SOT-23-5 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersX9C103P
PDIP-80℃~+70℃ 100 4.5V~5.5V 40Ω、100Ω 750uA Linear Non-volatile storage ±20% ±300ppm/℃ PDIP-8 Digital PotentiometersRenesas ElectronicsDigital Potentiometers
README
README.mdParts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn | My-library:SMD-CONN | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 4 | .1u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C13 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R8 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C7, C11, C12, C15 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R7 |
| 2 | 1.5n | Capacitor_SMD:C_0603_1608Metric | C1, C8 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C10 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C9, C16 |
| 2 | 47u | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 3M | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | MAX4477 | Package_SO:MSOP-8_3x3mm_P0.65mm | D1 |
| 1 | NCP1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | NCP1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | TLV3501 | Package_TO_SOT_SMD:SOT-23-6 | D3 |
| 1 | TS5A4595 | Package_TO_SOT_SMD:SOT-23-5 | D5 |
| 1 | X9C103 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | D2 |
More from Maniak003/Anemometer
10- 2 layers45 × 45 mm

- 2 layers45 × 45 mm

- 2 layers23.3 × 37.9 mm

- 2 layers45 × 45 mm

- 2 layers46.1 × 54.3 mm

- 2 layers31.4 × 25.7 mm

- 2 layers30 × 25.6 mm

- 2 layers25.4 × 15.9 mm

- 2 layers9 × 6.9 mm

- 2 layers7.8 × 4.5 mm

Similar boards
- 2 layers90.4 × 60.5 mm

PSU
jscrane/PSU
Software-controlled variable-voltage power supply with current and power monitoring
19 parts5Apache-2.0 - 2 layers85.1 × 53.3 mm

- 2 layers75.7 × 37.4 mm

Spectrometer
atx/spectrometer
Alpha spectrometer developed during my internship at the Institute at the Experimental and Applied Physics
270 parts2MIT - 2 layers63.1 × 45 mm

- 2 layers139.7 × 41.9 mm

Kstat mainboard
nfroehberg/GlazerLab_KStat
Firmware, PCB design and Python interface for the KStat potentiostat developed in the Glazer Lab, University of Hawaii.
121 parts - 2 layers70.2 × 57 mm

SAR ADC
iic-jku/gf180mcu-jku-projects
This wafer.space tapeout includes various projects from the IICQC at JKU and a TinyWhisper RISC-V from JMU.
25 parts11 - 4 layers130 × 90 mm

FrequnecyCounter
LUMERIIX/FrequencyCounter
FPGA based frequnecy counter hard- and software repository
129 parts6 - 6 layers83.5 × 99.4 mm

Questions
How big is the Amp200 PCB?
It measures 30.2 × 29 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Amp200 use?
44 parts, built around the MAX4477AUA+, TLV3501AID, TS5A4595DBV and X9C103P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp200 KiCad files?
From the Maniak003/Anemometer repository on GitHub, at the commit this page was made from: the board is kicad/Amp200/Amp200.kicad_pcb and its schematic kicad/Anemometer_200_G473/Anemometer_200_G473.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp200 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).