
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

MAGLabs-2017-Swadges is an open-source printed circuit board by magfest, from the magfest/MAGLabs-2017-Badges repository on GitHub. It is a 2-layer board of 70 × 120 mm with 38 parts on 48 nets, routed with 410 tracks and 14 vias.
It is built around the WS2812B. Its parts include 10 diodes, 8 switches, 7 resistors, 4 capacitors and 3 connectors. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R6, R7 |
| 6 | D | Diodes_SMD:D_SOD-323 | D1, D2, D3, D8, D9, D10 |
| 4 | WS2812B | local:WS2812B | D4, D5, D6, D7 |
| 2 | 0.1u | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | 10u | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | Battery_Cell | local:Elecrow-ThroughHole-AA-Battery | BT1, BT2 |
| 1 | A | local:PTS645 | S5 |
| 1 | B | local:PTS645 | S6 |
| 1 | Down | local:PTS645 | S2 |
| 1 | ESP12E | local:ESP12E | U1 |
| 1 | IR Sensor | local:VALVE_CHICKLET_8_1 | J2 |
| 1 | LCD Screen | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | LOGO | mark:Citizen-label2 | G*** |
| 1 | LOGO | local:maglabs-frontv2 | G2 |
| 1 | LOGO | local:maglabs-backv2 | G1 |
| 1 | Left | local:PTS645 | S3 |
| 1 | Program | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J3 |
| 1 | Right | local:PTS645 | S4 |
| 1 | Select | local:PTS645 | S8 |
| 1 | Start/Program | local:PTS645 | S7 |
| 1 | Up | local:PTS645 | S1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 70 × 120 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the magfest/MAGLabs-2017-Badges repository on GitHub, at the commit this page was made from: the board is MAGLabs-2017-Swadges.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask magfest before reusing the design.