2 layers
2 layers67 × 67 mm
Moores esp32
madpilot/moores-esp321ESP32 replacement for the Moores Holiday
- Size
- 67 × 67 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 43
- Pads
- 91
- Tracks, vias
- 90, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2025
- Updated
- 9 Jun 2025
Overview
Moores esp32 is an open-source printed circuit board by madpilot, from the madpilot/moores-esp32 repository on GitHub. It is a 2-layer board of 67 × 67 mm with 20 parts on 43 nets, routed with 90 tracks and 3 vias.
It is built around the ESP32-S2-WROVER-I(4M) and BSS138. Its parts include 4 capacitors, 3 resistors, 3 connectors, 3 switches and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
2Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_6.5mm | H1, H2, H3, H4 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7k | Capacitor_SMD:C_0805_2012Metric | R1, R2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x03 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J3 |
| 1 | ESP32-S2-WROVER | RF_Module:ESP32-S2-WROVER | U4 |
| 1 | MCP1700 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | PWR | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Programmer | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
Questions
How big is the Moores esp32 PCB?
It measures 67 × 67 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Moores esp32 use?
20 parts, built around the ESP32-S2-WROVER-I(4M) and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Moores esp32 KiCad files?
From the madpilot/moores-esp32 repository on GitHub, at the commit this page was made from: the board is MooresESP32.kicad_pcb and its schematic MooresESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Moores esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask madpilot before reusing the design.
Similar boards
- 2 layers146.9 × 156 mm
- 2 layers82.5 × 140 mm
QCamPCR
GaudiLabs/qPocketPCR
Quantitative PCR machine detecting fluorescence using a camera
113 parts22GPL-3.0 - 2 layers81 × 59 mm
Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22 - 2 layers56.2 × 53.3 mm
- 6 layers90 × 90 mm
Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0 - 2 layers40 × 43 mm
- 2 layers40 × 40 mm
Esp32Drone
HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor
83 parts2