
Netscore
arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

this project is a drone based on esp32 microcontroller and coreless DC motor
Esp32Drone is an open-source printed circuit board by HexaBitsEdu, from the HexaBitsEdu/ESP32-MiniDrone repository on GitHub. It is a 2-layer board of 40 × 40 mm with 83 parts on 69 nets, routed with 568 tracks and 57 vias.
It is built around the ESP32-S2-WROVER-I(4M), AP2112K-3.3 and MPU-6050, with the AO3400A, LL4148 and AO3401A among its other parts. Its parts include 25 resistors, 18 capacitors, 10 diodes, 9 connectors and 5 ICs. It belongs with the robots and motor control boards and the ESP32 boards of this library.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_01005_0402Metric | R5, R6, R7, R8, R9, R10, R11, R12, R13, R18, R19, R20, R21, R22, R23, R25 |
| 9 | 10UF-10V | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C5, C8, C11, C12, C13, C14, C15 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | 0.1UF-10V | Capacitor_SMD:C_01005_0402Metric | C2, C6, C9, C10, C16, C17, C18 |
| 5 | Conn_01x02_Male | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4, J5, J6, J7, J8 |
| 4 | 1K5 | Resistor_SMD:R_01005_0402Metric | R14, R15, R16, R17 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 4 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D5, D6 |
| 4 | LL4148 | Diode_SMD:D_MiniMELF | D7, D8, D9, D10 |
| 3 | 82K-1% | Resistor_SMD:R_01005_0402Metric | R1, R2, R4 |
| 2 | Conn_01x09_Male | Connector_PinHeader_1.27mm:PinHeader_1x09_P1.27mm_Vertical | J2, J3 |
| 1 | 0R | Resistor_SMD:R_01005_0402Metric | R24 |
| 1 | 100K | Resistor_SMD:R_01005_0402Metric | R3 |
| 1 | 10NF-25V | Capacitor_SMD:C_01005_0402Metric | C7 |
| 1 | 2.2NF | Capacitor_SMD:C_01005_0402Metric | C3 |
| 1 | 330R at 100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 3v6 | Diode_SMD:D_MiniMELF | D2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BAT60B | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | Conn_01x26_Female | Connector_FFC-FPC:Hirose_FH12-26S-0.5SH_1x26-1MP_P0.50mm_Horizontal | J9 |
| 1 | ESP32-S2-WROVER | espressif:MODULE_ESP32-S2-WROVER | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | USB_OTG | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | XC6206P1V8MR | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | XC6206P2V8MR | Package_TO_SOT_SMD:SOT-23 | U4 |

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

NITHYAR2005/PCB-BOARD-DESIGN-FOR-IOT-ENABLED-WEARABLE-HEALTH-MONITOR

MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".



Sagaz0501/esp32-drone
PCB ESP32 quadcopter: KiCad hardware + Madgwick IMU firmware + WiFi web UI

kokhaie/Smart-Refrigerator-Demo
The KiCad-generated BOM is mirrored into the documentation site under docs/ so it can be published through GitHub Pages.

shreejita56/XiZi-PCB-DRONE
So I made a custom PCB based on Esp32 . It holds an IMU and a Barometer for control . It has a normal 4 Motor Layout 2 motors will move clock wise and 2 will be anti-clock wise direction.
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
83 parts, built around the ESP32-S2-WROVER-I(4M), AP2112K-3.3, MPU-6050 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HexaBitsEdu/ESP32-MiniDrone repository on GitHub, at the commit this page was made from: the board is circuit/esp32Drone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HexaBitsEdu before reusing the design.