2 layers73.7 × 80 mm
Spdif decoder
maddoxlab/spdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
30 parts2BSD-3-Clause
2 layers92.7 × 96.5 mm
Spdif decoder
maddoxlab/spdif-splitter2Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
- Size
- 92.7 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 155
- Pads
- 268
- Tracks, vias
- 335, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Aug 2021
- Updated
- 10 Mar 2024
Overview
Spdif decoder is an open-source printed circuit board by maddoxlab, from the maddoxlab/spdif-splitter repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 92.7 × 96.5 mm with 33 parts on 155 nets, routed with 335 tracks and 18 vias.
It is built around the 74AHCT595D, TBL009V-254-02GY-2GY and TBL009V-254-10GY-2GY, with the TBL009V-254-16GY-2GY and TBL009V-254-24GY-2GY among its other parts. Its parts include 7 resistors, 6 diodes, 6 connectors, 4 capacitors and 4 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5
74AHCT595D
SOP-16-40℃~+125℃ 1 110MHz 4.5V~5.5V 5.3ns@5V,50pF 500mW 74AHCT 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSNexperiaShift RegistersTBL009V-254-02GY-2GY
插件,P=2.54mm-40℃~+105℃ 1 150V 18~26 1x2P 2 2.54mm 2P 5A Gray 插件,P=2.54mm Spring Clamp System Terminal Block ROHSCUISpring Clamp System Terminal Block
TBL009V-254-10GY-2GY
插件,P=2.54mm1 10 10P 150V 2.54mm 5A Gray Through Hole 插件,P=2.54mm Spring Clamp System Terminal Block ROHSCUISpring Clamp System Terminal BlockTBL009V-254-16GY-2GY
插件,P=2.54mm1 150V 16 16P 2.54mm 5A Gray Through Hole 插件,P=2.54mm Spring Clamp System Terminal Block ROHSCUISpring Clamp System Terminal BlockTBL009V-254-24GY-2GY
插件,P=2.54mm1 150V 2.54mm 24 24P 5A Gray Through Hole 插件,P=2.54mm Spring Clamp System Terminal Block ROHSCUISpring Clamp System Terminal Block
README
README.mdspdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6 |
| 4 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4 |
| 3 | 74AHCT595 | digikey-footprints:DIP-16_W7.62mm | U2, U3, U4 |
| 1 | 22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 47u | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | L1 |
| 1 | DB25_Female | Connector_Dsub:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm | J1 |
| 1 | TBL009V-254-02GY-2GY | SamacSys_Parts:TBL009V25402GY2GY | J3 |
| 1 | TBL009V-254-10GY-2GY | SamacSys_Parts:TBL009V25410GY2GY | J6 |
| 1 | TBL009V-254-16GY-2GY | SamacSys_Parts:TBL009V25416GY2GY | J5 |
| 1 | TBL009V-254-24GY-2GY | SamacSys_Parts:TBL009V25424GY2GY | J2 |
| 1 | TORX1950A(F) | SamacSys_Parts:TORX1950AF | J8 |
| 1 | Teensy4.0 | teensy:Teensy40 | U1 |
The 28 most common of 33 parts.
Questions
How big is the Spdif decoder PCB?
It measures 92.7 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spdif decoder use?
33 parts, built around the 74AHCT595D, TBL009V-254-02GY-2GY, TBL009V-254-10GY-2GY and TBL009V-254-16GY-2GY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spdif decoder KiCad files?
From the maddoxlab/spdif-splitter repository on GitHub, at the commit this page was made from: the board is v1/kicad/spdif-decoder/spdif-decoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spdif decoder design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from maddoxlab/spdif-splitter
2- 2 layers38.1 × 71.1 mm
Adapter
maddoxlab/spdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
4 parts2BSD-3-Clause
Similar boards
- 2 layers100 × 64.7 mm
- 4 layers100.9 × 77.5 mm
Ym2610-pcb
dan-rodrigues/ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.
168 parts31 - 4 layers50 × 75 mm
PhasedArray
dylanmsu/Ultrasonic_Phased_Array
This repository contains all the sources for a working ultrasonic phased array powered by a ZYNQ FPGA.
132 parts22GPL-2.0 - 2 layers157.5 × 97.8 mm
Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 4 layers136.3 × 71.1 mm
- 2 layers132.6 × 71.1 mm
- 2 layers112.3 × 136.7 mm
- 4 layers220 × 233 mm
MDCL
frohro/modulation-dependent-carrier-level
A Modulation Dependent Carrier Level (MDCL) Board for Brown Boveri Shortwave Transmitters
67 partsGPL-3.0