
Spdif decoder
maddoxlab/spdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments

Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
Spdif decoder is an open-source printed circuit board by maddoxlab, from the maddoxlab/spdif-splitter repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 73.7 × 80 mm with 30 parts on 89 nets, routed with 386 tracks and 65 vias.
It is built around the TORX1350A(F) and 74AHCT595D. Its parts include 6 resistors, 6 diodes, 5 capacitors, 5 ICs and 2 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6 |
| 5 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4, C5 |
| 4 | 74AHCT595 | digikey-footprints:DIP-16_W7.62mm | U2, U3, U4, U5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 47u | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | L1 |
| 1 | DB25_Female | Connector_Dsub:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TORX1350A(F) | SamacSys_Parts:TORX1350AF | J2 |
| 1 | Teensy4.0 | teensy:Teensy40 | U1 |

maddoxlab/spdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments

maddoxlab/spdif-splitter
Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments


dan-rodrigues/ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.

dylanmsu/Ultrasonic_Phased_Array
This repository contains all the sources for a working ultrasonic phased array powered by a ZYNQ FPGA.

MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor




frohro/modulation-dependent-carrier-level
A Modulation Dependent Carrier Level (MDCL) Board for Brown Boveri Shortwave Transmitters
It measures 73.7 × 80 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the TORX1350A(F) and 74AHCT595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the maddoxlab/spdif-splitter repository on GitHub, at the commit this page was made from: the board is v2/kicad/spdif-decoder/spdif-decoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).