

Ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.
- Size
- 100.9 × 77.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 193
- Pads
- 694
- Tracks, vias
- 2,144, 425
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jan 2021
- Updated
- 27 Sep 2021
Overview
Ym2610-pcb is an open-source printed circuit board by dan-rodrigues, from the dan-rodrigues/ym2610-pcb repository on GitHub. It is a 4-layer board of 100.9 × 77.5 mm with 168 parts on 193 nets, routed with 2,144 tracks and 425 vias.
It is built around the 74LVC2G08, 74LV1T34GW and 74LVC1G34Z, with the 74LVCH245AD, TSV914IPT and AD8532AR among its other parts. Its parts include 64 resistors, 55 capacitors, 21 ICs, 5 connectors and 3 switches. It belongs with the audio and music and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
1174LVC2G08
VSSOP-8-0.5mmVSSOP-8-0.5mm Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)74LV1T34GW
TSSOP-5-1.3mm-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.2ns@5V,30pF 74LV 8mA 8mA Push-pull Unidirectional TSSOP-5-1.3mm Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74LVC1G34Z
SOT-553-5-40℃~+125℃ 1 1 1.65V~5.5V 1.6ns@5V,50pF 10uA 32mA 32mA 74LVC Power-off isolation Push-pull Unidirectional SOT-553-5 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers74LVCH245AD
SO-20-300mil-40℃~+125℃ 1.2V~3.6V 2.9ns@3.3V,50pF 24mA 24mA 40uA 74LVCH 8 Bidirectional Tri-State SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/TransceiverTSV914IPT
TSSOP-14-40℃~+125℃ 1.5mV 10pA 1pA 2.5V~5.5V 21nV/√Hz@10kHz 35mA 4 4.5V/us 5uV/℃ 75dB 780uA 8MHz Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierAD8532AR
SOIC-8-40℃~+85℃ 1pA 2 2.7V~6V 20uV/℃ 250mA 30mV 3MHz 45nV/√Hz@1kHz 47dB 5V/us 5pA 750uA Overvoltage protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational Amplifier74HCT153D
SO-16-40℃~+125℃ 16ns@5.0V,15pF 4.5V~5.5V 4mA 4mA 74HCT 8uA Single Supply SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT573D
SO-20-300mil-40℃~+125℃ 13ns 20ns 4.5V~5.5V 74HCT 8 8uA 9ns D Latch Tri-State SOIC-20 Latches ROHSNexperiaLatches74AHCT595D
SOP-16-40℃~+125℃ 1 110MHz 4.5V~5.5V 5.3ns@5V,50pF 500mW 74AHCT 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSNexperiaShift Registers74LVC257AD
SOIC-16-40℃~+125℃ 1.2V~3.6V 2.4ns@3.3V,50pF 24mA 24mA 40uA 74LVC 8/4 Multiplexer Power-off protection、Tri-state output、Level shifting Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, DecodersTLP2361(E
SO-6,5LEAD-40℃~+125℃ 1.5V 1.6mA 10mA 15Mbps 2.7V~5.5V 20kV/us 3.75kV 5V 6V 6mA 80ns 80ns DC SO-6,5LEAD Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
README
pcb/README.mdPCB
Included is the schematic and PCB layout of the board.
Usage
Most ICs on the board are optional but a few are required in any case:
- 2x 74AHCT595: Shift registers to control the YM2610(B) and reset both the 2610 and the 3016.
- 1x 74LV1T34: Clock buffer, also shifts the 8MHz clock from 3.3v to 5v.
If ADPCM-A/B playback is needed, then these are required:
- 4x 74HCT153
- 1x 74LVC257
- 1x 74LVC2G08
- 1x 74LVC244
The analog section is optional assuming the SSG sound source isn't needed. To listen to the digital sound sources using S/PDIF output, there are optional optical and coax outputs. The coax output does not use a pulse transformer and one can be added if needed.
License
CERL-OHL-S-2.0. There is a copy of the text included in the licenses/ directory in the root of this repo. License text can also be found here.
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100k | Resistor_SMD:R_0603_1608Metric | R39, R40, R41, R42, R43, R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54 +10 |
| 22 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C16, C28, C29, C31, C32, C33, C34, C35, C36, C38, C39, C40, C41, C42, C43 +6 |
| 15 | 100R | Resistor_SMD:R_0603_1608Metric | R17, R18, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R8, R9, R10, R11, R15, R16 |
| 10 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C17, C18, C19, C20, C22, C23, C37 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C8, C30, C51, C53 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 220pF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C12 |
| 4 | 4.3k | Resistor_SMD:R_0603_1608Metric | R6, R7, R12, R13 |
| 4 | 47pF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C54, C55 |
| 4 | 74HCT153 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U8, U9, U19, U20 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 10nF | Capacitor_SMD:C_0603_1608Metric | C21, C24, C25 |
| 3 | 74HCT573 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6, U7, U17 |
| 2 | 100R | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 16R | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | 2.7nF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 270uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C26, C27 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 74AHCT595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U14, U15 |
| 2 | TSV914IPT | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U10, U11 |
| 1 | 110R | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 150uF | Capacitor_SMD:CP_Elec_5x5.8 | C52 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C49 |
| 1 | 210R | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 33R | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 68pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 74LV1T34 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | 74LVC1G34 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | 74LVC257 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U21 |
| 1 | 74LVC2G08 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U13 |
| 1 | 74LVCH245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | AD8532 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U12 |
| 1 | BLM18PG221SN1D | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | BTN_A | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | BTN_B | Button_Switch_SMD:SW_SPST_PTS645 | SW2 |
| 1 | CRESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | CRESET | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | DAC_CAP_NT | NetTie:NetTie-2_SMD_Pad0.5mm | NT2 |
| 1 | FM_PCM_VOLUME | Bourns_Potentiometer:PTD902-2020K-A103 | RV2 |
| 1 | HEADPHONES | Switchcraft:SWITCHCRAFT_35RAPC2BH3 | J3 |
| 1 | HEADPHONE_RETURN | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | LINE_OUT | Switchcraft:SWITCHCRAFT_35RAPC2BH3 | J2 |
| 1 | MIDI_IN | CUI_DIN:CUI_SDS-50J | J1 |
| 1 | MIX_VOLUME | Bourns_Potentiometer:PTD902-2020K-A103 | RV3 |
| 1 | SPDIF_COAX | CUI_RCJ:RCJ-04 | J4 |
| 1 | SPDIF_OPTICAL | Cliff_Electronic_Optical:FCR684208T | U16 |
| 1 | SSG_VOLUME | Bourns_Potentiometer:PTD901-2015K-A103 | RV1 |
| 1 | TLP2361 | SOIC-DK:SOIC-6-5_W4.55mm | U18 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | YM2610 | DIP_Socket:DIP-64_W19.05mm_P1.78mm_Socket | U1 |
| 1 | YM3016 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | iCEBreaker_Bitsy | pkl_module:iCEBreaker_Bitsy_THT | A1 |
Similar boards
- 4 layers100 × 100 mm

- 2 layers368.3 × 215.9 mm

- 4 layers133 × 93 mm

Project GP8B
JonathSpirit/GP8B
G_Processor8Bits a homemade without any microcontroller 8bits processor
110 parts - 2 layers

ISA FPGA
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
106 parts78 - 2 layers38.9 × 69.6 mm

- 2 layers171.5 × 106.7 mm

Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 4 layers100 × 100 mm

Pi TX 35W PA V2
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
185 parts15 - 2 layers45.1 × 29.2 mm

Questions
How big is the Ym2610-pcb PCB?
It measures 100.9 × 77.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ym2610-pcb use?
168 parts, built around the 74LVC2G08, 74LV1T34GW, 74LVC1G34Z and 74LVCH245AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ym2610-pcb KiCad files?
From the dan-rodrigues/ym2610-pcb repository on GitHub, at the commit this page was made from: the board is pcb/ym2610-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ym2610-pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask dan-rodrigues before reusing the design.