Skip to the content
12345678910111213141516

74AHCT595D

NexperiaExtended

-40℃~+125℃ 1 110MHz 4.5V~5.5V 5.3ns@5V,50pF 500mW 74AHCT 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHS

Part id
nexperia/74AHCT595D
Category
Shift Registers
Package
SOP-16
Pins
16
In stock
1 at JLCPCB (C503428)
Used on
20 open-source boards

Overview

The 74AHCT595D is a shift Register made by Nexperia in a SOP-16 package with 16 pins. -40℃~+125℃ 1 110MHz 4.5V~5.5V 5.3ns@5V,50pF 500mW 74AHCT 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHS.

PCBKit's library has its KiCad symbol (74xx:74AHCT595, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1 are in stock at JLCPCB (part C503428). 20 open-source boards in 17 repositories on GitHub use it.

Symbol

1QB2QC3QD4QE5QF6QG7QH8GND9QH'10SRCLR11SRCLK12RCLK13OE14SER15QA16VCC
74xx:74AHCT595From KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

Pinout

16
The pins of the 74AHCT595D
PinNameType
1QBTri-state
2QCTri-state
3QDTri-state
4QETri-state
5QFTri-state
6QGTri-state
7QHTri-state
8GNDPower in
9QH'Output
10SRCLRInput
11SRCLKInput
12RCLKInput
13OEInput
14SERInput
15QATri-state
16VCCPower in

Open-source boards using it

20See all 20
  • 2 layers100 × 64.7 mmDevRam, the printed circuit board in 3D

    DevRam

    Danjovic/MSX

    Coletânea de projetos para MSX

    37 parts43GPL-2.0
  • 4 layers100.9 × 77.5 mmYm2610-pcb, the printed circuit board in 3D

    Ym2610-pcb

    dan-rodrigues/ym2610-pcb

    FPGA-based PCB to control a YM2610 sound synthesis chip.

    168 parts31
  • 4 layers50 × 75 mmPhasedArray, the printed circuit board in 3D

    PhasedArray

    dylanmsu/Ultrasonic_Phased_Array

    This repository contains all the sources for a working ultrasonic phased array powered by a ZYNQ FPGA.

    132 parts22GPL-2.0
  • 2 layers157.5 × 97.8 mmEsp32PrinterController, the printed circuit board in 3D

    Esp32PrinterController

    MitchBradley/Esp32PrinterController

    PCB design for 3D printer controller using ESP32 processor

    101 parts16MIT
  • 4 layers136.3 × 71.1 mmMSign, the printed circuit board in 3D

    MSign

    mincrmatt12/MSign

    internet-connected led sign control system

    169 parts11MIT
  • 2 layers92.7 × 96.5 mmSpdif decoder, the printed circuit board in 3D

    Spdif decoder

    maddoxlab/spdif-splitter

    Design files and code for S/Plitter, a box that turns optical S/PDIF signals into separate TTL bits for EEG triggering in auditory experiments

    33 parts2BSD-3-Clause
  • 2 layers132.6 × 71.1 mmAscii to raw matrix, the printed circuit board in 3D

    Ascii to raw matrix

    abzman/ASCII-Keyboard

    Arduino based ascii keyboard from matrix

    45 parts1
  • 2 layers112.3 × 136.7 mmPCB 2, the printed circuit board in 3D

    PCB 2

    KomplexKapharnaum/LEDcurtain_hardware

    LEDcurtain_hardware

    117 parts1GPL-3.0

Parts like it

4

Questions

Is there a KiCad symbol and footprint for the 74AHCT595D?

Yes. The symbol is 74xx:74AHCT595 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74AHCT595D?

SOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the 74AHCT595D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74AHCT595D?

JLCPCB lists it as part C503428, with 1 in stock; the sellers' links on this page open their listings.

What can replace the 74AHCT595D?

Parts like it in the library: the SN74LV166ADGV by Texas Instruments, the 74F676PC by onsemi, the 74F676SPC by onsemi and the 74F676SC by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74AHCT595D?

20 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.