
Pcbcax
7bwiiza/Robot-creation
Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB

Arduino is an open-source printed circuit board by Maciej2777, from the Maciej2777/samochodzik repository on GitHub. It is a 2-layer board of 100 × 80 mm with 35 parts on 41 nets, routed with 250 tracks and 32 vias.
It is built around the ATMEGA328P-AU, L293D and AMS1117-5.0, with the MMBT5551L among its other parts. Its parts include 12 capacitors, 8 resistors, 4 diodes, 3 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C9, C10 |
| 4 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C7, C8, C11, C12 |
| 4 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5 |
| 2 | 2,2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3, D4 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Battery | Battery:BatteryHolder_MPD_BC2AAPC_2xAA | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | MMBT5551L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Motor1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | Motor2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M2 |
| 1 | Piny do programowania | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |

7bwiiza/Robot-creation
Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB

joseluu/MCP-AR-488-ESP32
The idea is to have AI help me build electronics. AI needs eyes, the eyes are the oscilloscope which is used through an MCP interface.


Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.


willqyu/Robot-Snake
Custom PCBs designed for each module, comm over I2C, Pi Pico as slave.

sampreets3/maria-robot
MARIA is a simple robot which will help me understand how to design the systems of a complex robot. Features will be mentioned as they are added.

singharyan2001/hw-Atmega328p-DevBoard
This Repository tracks the development of Atmega328p MCU based development board design, which is designed for learning end to end pcb designing via KiCad Software.
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the ATMEGA328P-AU, L293D, AMS1117-5.0 and MMBT5551L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Maciej2777/samochodzik repository on GitHub, at the commit this page was made from: the board is arduino.kicad_pcb and its schematic arduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Maciej2777 before reusing the design.