

RemoteControl
Designing and building electronics cards for own projects.
- Size
- 110 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 47
- Pads
- 164
- Tracks, vias
- 391, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Nov 2018
- Updated
- 14 Oct 2019
Overview
RemoteControl is an open-source printed circuit board by flukedf, from the flukedf/PCB-Cards repository on GitHub. It is a 2-layer board of 110 × 56 mm with 51 parts on 47 nets, routed with 391 tracks and 7 vias.
It is built around the ATMEGA328P-PU, AMS1117-5.0 and JS1-5V-F, with the MMBT5551L among its other parts. Its parts include 10 resistors, 10 diodes, 8 connectors, 7 capacitors and 6 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsJS1-5V-F
插件,22x16mm-40℃~+70℃ 100V@DC、250V@AC 100mΩ 10A 10ms 10ms 360mW 5V 69.4Ω 6A@277VAC、10A@125VAC AgSnO2 One set changeover: 1C (SPDT - changeover) 插件,22x16mm Power Relays ROHSPanasonicPower RelaysMMBT5551L
SOT-23-55℃~+150℃ 1 NPN 100nA 160V 250mV 300mW 600mA 6V 80 NPN SOT-23 Bipolar (BJT) ROHSonsemiBipolar (BJT)
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistors_SMD:R_1206_HandSoldering | R1, R2, R5, R6, R10 |
| 5 | 1N4001 | w_smd_diode:do214ac | D1, D3, D5, D7, D9 |
| 4 | 1K | Resistors_SMD:R_1206_HandSoldering | R3, R4, R7, R8 |
| 4 | JS1-5V-F | Panasonic:JS1-5V-F | K1, K2, K3, K4 |
| 4 | MMBT5551L | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4 |
| 4 | PC817 | Housings_DIP:DIP-4_W7.62mm | U1, U2, U3, U4 |
| 2 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C2, C7 |
| 2 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C1, C5 |
| 2 | 47uF | Capacitors_SMD:CP_Elec_8x6.5 | C3, C4 |
| 2 | hole | RielDin:Bracket_RielDin_hole | J7, J8 |
| 1 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C6 |
| 1 | 16MHz | w_crystal:crystal_hc-49s | Y1 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R9 |
| 1 | AMS1117-5.0 | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U5 |
| 1 | ARD | w_conn_mkds:mkds_1,5-3 | J1 |
| 1 | ARD | w_smd_leds:Led_PLCC2_3528 | D2 |
| 1 | ATmega328P-PU | Housings_DIP:DIP-28_W7.62mm | U6 |
| 1 | NUC | w_smd_leds:Led_PLCC2_3528 | D4 |
| 1 | NUC | w_conn_mkds:mkds_1,5-3 | J2 |
| 1 | POWER | w_smd_leds:Led_PLCC2_3528 | D10 |
| 1 | POWER | w_conn_mkds:mkds_1,5-2 | J6 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | RLY3 | w_smd_leds:Led_PLCC2_3528 | D6 |
| 1 | RLY3 | w_conn_mkds:mkds_1,5-3 | J3 |
| 1 | RLY4 | w_conn_mkds:mkds_1,5-3 | J4 |
| 1 | RLY4 | w_smd_leds:Led_PLCC2_3528 | D8 |
| 1 | SERIAL232 | w_conn_mkds:mkds_1,5-4 | J5 |
More from flukedf/PCB-Cards
12- 2 layers200 × 74 mm

- 2 layers200.7 × 84.8 mm

- 2 layers

SeguridadPerimetral
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
72 parts - 2 layers60 × 150 mm

20170409 remote tht
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
53 parts - 2 layers

- 2 layers90.2 × 85.1 mm

Contador ascendente
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
23 parts - 2 layers52.8 × 42.7 mm

- 2 layers51.4 × 64.1 mm

- 2 layers

- 2 layers133.4 × 35.6 mm

- 2 layers142.2 × 25.4 mm

- 2 layers7.7 × 23.2 mm

Similar boards
- 4 layers100 × 80 mm

SDC
EggLem0n/Formula-KSAE-NstopO-EH-32
E formula, SAE. This repository contains the LV Electrical Safety System Circuit Design files for the EH-32, developed by NstopO, the student racing team at Chung-Ang University.
45 partsGPL-3.0 - 2 layers86 × 67 mm

AR488 ESP32
joseluu/MCP-AR-488-ESP32
The idea is to have AI help me build electronics. AI needs eyes, the eyes are the oscilloscope which is used through an MCP interface.
22 parts2 - 2 layers100 × 80 mm

- 2 layers68.5 × 53.4 mm

ZATINO PTH V2
zatelectronic/ZATINO_PTH_V2
O microcontrolador principal é o clássico ATmega328P-PU no encapsulamento DIP-28, encaixado diretamente na placa.
29 parts1 - 2 layers95 × 63 mm

- 2 layers142.2 × 125.7 mm

- 2 layers45.5 × 53 mm

- 2 layers80 × 60 mm

Smart grid fault detector
shawnsony07/smart-grid-fault-detector
An ATmega328P-based smart grid fault detector featuring high-side current sensing via INA180A1 and voltage monitoring.
39 parts
Questions
How big is the RemoteControl PCB?
It measures 110 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RemoteControl use?
51 parts, built around the ATMEGA328P-PU, AMS1117-5.0, JS1-5V-F and MMBT5551L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RemoteControl KiCad files?
From the flukedf/PCB-Cards repository on GitHub, at the commit this page was made from: the board is RemoteControl/ RemoteControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RemoteControl design in my own project?
Its repository states no licence, so its author keeps all rights: ask flukedf before reusing the design.