Skip to the content
2 layers85.6 × 54 mmBusinessCard, the printed circuit board in 3D

My own business card made from a PCB with a ruler and a functional circuit with a sensor, buttons, leds and a vibration motor! All in a footprint of a standard credit card

Size
85.6 × 54 mm
Copper layers
2
Thickness
0.8 mm
Parts
48
Nets
54
Pads
202
Tracks, vias
711, 115
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Mar 2026
Updated
16 Apr 2026

Overview

BusinessCard is an open-source printed circuit board by m1cha3l-s, from the m1cha3l-s/pcb-card repository on GitHub. It is a 2-layer board of 85.6 × 54 mm with 48 parts on 54 nets, routed with 711 tracks and 115 vias.

It is built around the BME280, WS2812B-2020 and MMBT3904. Its parts include 36 diodes, 3 connectors, 2 ICs, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

3

README

README.md

m1cha3l's PCB Business card V1

You were luck enough to recieve my pcb business card! You can keep it in your wallet and use the built in ruler or solder the needed components and get a nice desk accessories which has a 6x6 NeoPixel MATRIX, 2 buttons, vibration motor for notifications and a BME280 sensor for presure, humidity and temerature and supports Zigbee, Matter, Thread and bluetooth and wifi.

Building

You can buy the components I have in my bom to build this together! Also I included headers which you can solder to add more sensors for smart home!

Firmware

I have included a simple firmware which shows red when the temp from BME280 is over 20℃ and green when under when you press button number 2 and vibrates and shows blue when you press button number 1.

  1. Open Arduino IDE
  2. Choose seeed xiao ESP32-C6
  3. Flash and enjoy!!

Looks

Looks

Looks

Schematic and PCB

PCB

Schematic

BOM

Parts

48
QtyValueFootprintReferences
36WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20
2Conn_01x01_PinTestPoint:TestPoint_Pad_2.0x2.0mmJ2, J3
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1, SW2
1clipboard:f06da421-139f-4461-bd72-0d63481e1e29
1330Resistor_SMD:R_0603_1608MetricR1
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU2
1Conn_01x07_PinConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1MMBT3904Package_TO_SOT_SMD:SOT-23Q1
1XIAO-ESP32-C6Seeed Studio XIAO Series Library:XIAO-ESP32C6-DIPU1
1big-githubqrSymbol:big-githubqrQR*****
1https://www.youtube.com/watch?v=dQw4w9WgXcQhttps://www.youtube.com/watch?v=dQw4w9WgXcQQR*****

Similar boards

  • 4 layers35.5 × 74.5 mmRoom environment monitor, the printed circuit board in 3D

    Room environment monitor

    kevinlutzer/room-environment-monitor

    An IOT device built of the raspberry pi

    57 parts
  • 2 layers70 × 110 mmThermostat pcb, the printed circuit board in 3D

    Thermostat pcb

    mikegormack/thermostat-pcb

    knob thermostat PCB Kicad

    103 parts
  • 2 layers76.5 × 76.5 mmEdge AI Badge Main, the printed circuit board in 3D

    Edge AI Badge Main

    LyndLabs/Edge-AI-Badge

    Edge AI Foundation Badge - hardware files :)

    136 parts1
  • 2 layers210 × 297 mmFra clock, the printed circuit board in 3D

    Fra clock

    albertoboffi-PERSONAL/fra-clock

    A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers…

    428 parts
  • 4 layersElec, the printed circuit board in 3D

    Elec

    elkel53930/twilight2

    A robosweep agent Twilight-2

    164 parts
  • 4 layers80 × 54 mmPoket, the printed circuit board in 3D

    Poket

    kaorii-ako/Poket

    ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch

    104 parts
  • 4 layers100 × 91.4 mmSurprise, the printed circuit board in 3D

    Surprise

    marmbrus/circuits

    173 parts
  • 4 layers45.6 × 45.6 mmNearfi pcb, the printed circuit board in 3D

    Nearfi pcb

    mauriciobarroso/nearfi_pcb

    50 partsMIT

Questions

How big is the BusinessCard PCB?

It measures 85.6 × 54 mm and has 2 copper layers, 0.8 mm thick.

What parts does the BusinessCard use?

48 parts, built around the BME280, WS2812B-2020 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BusinessCard KiCad files?

From the m1cha3l-s/pcb-card repository on GitHub, at the commit this page was made from: the board is PCB:Schematic/businessCard.kicad_pcb and its schematic PCB:Schematic/businessCard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BusinessCard design in my own project?

Its repository states no licence, so its author keeps all rights: ask m1cha3l-s before reusing the design.