
Room environment monitor
kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi

My own business card made from a PCB with a ruler and a functional circuit with a sensor, buttons, leds and a vibration motor! All in a footprint of a standard credit card
BusinessCard is an open-source printed circuit board by m1cha3l-s, from the m1cha3l-s/pcb-card repository on GitHub. It is a 2-layer board of 85.6 × 54 mm with 48 parts on 54 nets, routed with 711 tracks and 115 vias.
It is built around the BME280, WS2812B-2020 and MMBT3904. Its parts include 36 diodes, 3 connectors, 2 ICs, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
You were luck enough to recieve my pcb business card! You can keep it in your wallet and use the built in ruler or solder the needed components and get a nice desk accessories which has a 6x6 NeoPixel MATRIX, 2 buttons, vibration motor for notifications and a BME280 sensor for presure, humidity and temerature and supports Zigbee, Matter, Thread and bluetooth and wifi.
You can buy the components I have in my bom to build this together! Also I included headers which you can solder to add more sensors for smart home!
I have included a simple firmware which shows red when the temp from BME280 is over 20℃ and green when under when you press button number 2 and vibrates and shows blue when you press button number 1.




| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_2.0x2.0mm | J2, J3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | clipboard:f06da421-139f-4461-bd72-0d63481e1e29 | ||
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | XIAO-ESP32-C6 | Seeed Studio XIAO Series Library:XIAO-ESP32C6-DIP | U1 |
| 1 | big-githubqr | Symbol:big-githubqr | QR***** |
| 1 | https://www.youtube.com/watch?v=dQw4w9WgXcQ | https://www.youtube.com/watch?v=dQw4w9WgXcQ | QR***** |

kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi



albertoboffi-PERSONAL/fra-clock
A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers…


kaorii-ako/Poket
ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch


It measures 85.6 × 54 mm and has 2 copper layers, 0.8 mm thick.
48 parts, built around the BME280, WS2812B-2020 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the m1cha3l-s/pcb-card repository on GitHub, at the commit this page was made from: the board is PCB:Schematic/businessCard.kicad_pcb and its schematic PCB:Schematic/businessCard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask m1cha3l-s before reusing the design.