Skip to the content
2 layers25.3 × 30 mmBase std, the printed circuit board in 3D

Schematics and files for MoaT IoT things

Size
25.3 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
29
Pads
110
Tracks, vias
324, 60
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20220225)
Created
3 Aug 2017
Updated
28 Oct 2026

Overview

Base std is an open-source printed circuit board by M-o-a-T, from the M-o-a-T/moat-hardware repository on GitHub. It is a 2-layer board of 25.3 × 30 mm with 19 parts on 29 nets, routed with 324 tracks and 60 vias.

It is built around the BAT54SW and BAT54S. Its parts include 6 resistors, 6 diodes, 5 connectors and 1 transistor.

Main components

2

README

README.rst

============= MoaT Hardware

This is the collection of files for the physical side of MoaT: Schematics and layouts (kicad), Enclosures (OpenSCAD).

++++++++++++++++ Up-to-date stuff ++++++++++++++++


BMS

Controller and module for battery management.

The hardware design supports both active-high (diyBMS) and active-low (MoaT) serial connections.


Wire

Connect some wires to the MoaT board.


misc

Random stuff (Enocean adapter, USB intercept, …).


adapt

+++++++++ Old stuff +++++++++

CPUs

The proc/ directory contains CPU boards, i.e. things that have a bus plug.

CPUs are responsible for adapting 1wire (5V) and MoaTbus (12V) to their internal voltage.

Boards

The board/ directory contains everything that has a bus socket, i.e. interfaces to the Real World.

Many of these boards have 12V-MoaTbus, 5V-1wire, and/or 3.3V-I2C connectors.

The boards are not responsible for translating voltages to the (commonly) 3.3V which CPUs expect.

Breadboard ++++++++++

The most important part. Use this to test CPUs.

Heating +++++++

This board has two transistors to switch one or two 24V radiator valves (PPM).

Smoke detector ++++++++++++++

This board fits into a Gira Dual or Q smoke detector.

Old stuff

The old/ directory contains things I need to clean up.

+++++++++ Licensing +++++++++

(Almost) all files in this archive are (c) 2021-2022 by Matthias Urlichs. They are licensed under the GNU General Public License, V3.

This means: if you use any these files to build something which you sell or give to somebody else, you're required to make the schematics, layouts, design files, and source code of the resulting product available.

Developing these devices takes time and money. Thus, while using all or part of this achive commercially is OK, their creators hereby humbly ask for adequate financial remuneration if you use any of these files for monetary gain. Thank you.

License exception +++++++++++++++++

The battery module in the bms/cell subdirectory has originally been designed by Stuart Pittaway. It is governed by a Creative Commons Attribution-NonCommercial-ShareAlike 2.0 UK: England/Wales license. See the file bms/cell/LICENSE for details.

Parts

19
QtyValueFootprintReferences
5BAT54SWPackage_TO_SOT_SMD:SOT-23D2, D3, D4, D5, D6
4470Resistor_SMD:R_0603_1608MetricR3, R5, R6, R7
210kResistor_SMD:R_0603_1608MetricR1, R2
11wireConnlocalstuff:AVX_9276_3PinJ10
12N7002Package_TO_SOT_SMD:SOT-23Q1
1BAT54SPackage_TO_SOT_SMD:SOT-23D1
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1I2Clocalstuff:AVX_9276_4Pin_HSJ3
1Moat_Bus_wirelocalstuff:TE_1775014_socketJ2
1Moat_Wire_12localstuff:MoaT_12_Pin_VJ1
1SolderJumper_3_OpenJumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabelsJP1

More from M-o-a-T/moat-hardware

12
  • 2 layers140.4 × 84.9 mmBase18, the printed circuit board in 3D

    Base18

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    180 parts
  • 2 layers56 × 65 mmPiPower, the printed circuit board in 3D

    PiPower

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    128 parts
  • 2 layers49 × 162.8 mmPower3, the printed circuit board in 3D

    Power3

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    95 parts
  • 2 layers78.5 × 104.5 mmGaggenau, the printed circuit board in 3D

    Gaggenau

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    65 parts
  • 4 layers41.2 × 32.7 mmHeat proc, the printed circuit board in 3D

    Heat proc

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    64 parts
  • 2 layers56.8 × 52.4 mmCtrl, the printed circuit board in 3D

    Ctrl

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    52 parts
  • 2 layers54.4 × 67 mmSolvis control, the printed circuit board in 3D

    Solvis control

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    51 parts
  • 2 layers30 × 53.9 mmCell, the printed circuit board in 3D

    Cell

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    47 parts
  • 2 layers41.2 × 35.3 mmHeat proc 2, the printed circuit board in 3D

    Heat proc 2

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    41 parts
  • 4 layers46.9 × 17.4 mmUsb int, the printed circuit board in 3D

    Usb int

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    41 parts
  • 2 layers100 × 80 mmBreakout, the printed circuit board in 3D

    Breakout

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    39 parts
  • 2 layers32 × 52 mmTest i2c, the printed circuit board in 3D

    Test i2c

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    35 parts

Similar boards

  • 8 layers100 × 60 mmYAMMU ControlBoard v05, the printed circuit board in 3D

    YAMMU ControlBoard v05

    Zergie/YAMMU

    A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.

    234 parts107GPL-3.0
  • 4 layers481.3 × 23.7 mmFaraday rescue bms, the printed circuit board in 3D

    Faraday rescue bms

    nhallsny/faraday-rescue

    Open source battery for e-bikes made by the now-defunct Faraday Bicycles

    155 parts8CERN-OHL-P-2.0
  • 4 layers129 × 79.5 mmStimjim, the printed circuit board in 3D

    Stimjim

    open-ephys/stimjim

    A precise intra and extracellular electrical stimulator

    236 parts7
  • 2 layers40.1 × 109.9 mmDemiurge, the printed circuit board in 3D

    Demiurge

    AwesomeAudioApparatus/demiurge

    Demiurge is a combination of Hardware and Software for Digital Sound Processing in the Eurorack Modular Synthesizer environment.

    155 parts4Apache-2.0
  • 4 layers100 × 100 mmThree Half Bridges, the printed circuit board in 3D

    Three Half Bridges

    powermax555/Three-Half-Bridges

    Half bridge module for use in larger power conversion and motor control systems

    156 parts3
  • 4 layers69 × 39 mmJPBms2, the printed circuit board in 3D

    JPBms2

    jakepoz/jpbms

    JPBms is a simple BMS for solar charging and balancing a 3-cell lithium ion battery.

    132 parts2
  • 4 layers83 × 121 mmCarrier1 Adalogger M0 2x3pin, the printed circuit board in 3D

    Carrier1 Adalogger M0 2x3pin

    Safecast/bGeigieScint

    The board features an integrated boost converter + linear regulator topology for SiPM bias generation:

    123 parts2
  • 2 layers101.6 × 78.7 mmBADGER v41, the printed circuit board in 3D

    BADGER v41

    wyolum/BADGEr

    EReader badge and shield

    117 parts2

Questions

How big is the Base std PCB?

It measures 25.3 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base std use?

19 parts, built around the BAT54SW and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base std KiCad files?

From the M-o-a-T/moat-hardware repository on GitHub, at the commit this page was made from: the board is base/std/base_std.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base std design in my own project?

Its repository states no licence, so its author keeps all rights: ask M-o-a-T before reusing the design.