Carrier1 Adalogger M0 2x3pin

bGeigieScint

bGeigieScint is a compact radiation detection board featuring a Silicon Photomultiplier (SiPM) based sensor system with integrated high-voltage generation, analog signal processing, and USB connectivity.

📋 Features

• Microcontroller: ATSAML21G18B (ARM Cortex-M0+, 256KB Flash, 32KB RAM)
• SiPM Interface: Complete analog frontend with adjustable HV bias (30-70V)
• Power Management: Multi-rail power supply (3.3V, 3.0V, Vload, Vbias)
• Connectivity: USB-C interface with ESD protection
• Debug: 10-pin J-LINK SWD interface + 18 test points
• Expansion: Multiple GPIO headers for external interfaces
• Compact: 40mm × 100mm 4-layer PCB

🔧 Hardware Specifications

Main Components

SiPM Sensor

• Part Number: AFBR-S4N44P014M (Broadcom)
• Type: NUV-HD Silicon Photomultiplier
• Active Area: 4×4 mm²
• Spectral Range: 350-900 nm (peak sensitivity ~420 nm)
• Datasheet: AFBR-S4N44P014M Documentation

Scintillator Crystal

• Material: CsI(Tl) - Cesium Iodide doped with Thallium
• Dimensions: 10 mm × 10 mm × 20 mm
• Emission Peak: ~550 nm (matches SiPM sensitivity)
• Application: Gamma ray detection coupled to SiPM

Power Supply

• Input: 4.5-6V via USB-C or external connector
• Output Rails:
  • 3.3V @ up to 200mA (digital)
  • 3.0V @ up to 100mA (analog)
  • Vload (adjustable)
  • Vbias: 30-70V @ low current (SiPM bias)

HV Generation

The board features an integrated boost converter + linear regulator topology for SiPM bias generation:

• Boost Stage: PWM-controlled (L1 10mH inductor, Q3 P-FET, D9 Schottky)
• Regulation: LT3014 ultra-low-noise LDO
• Control: MCU DAC output (PA02_DAC_HV) sets target voltage
• Monitoring: Comparator feedback (PB10_HV_COMP_OUT)
• Output: Adjustable 30-70V Vbias for SiPM

📁 Project Structure

bGeigieScint/
├── bGeigieScint/
│   ├── bGeigieScint.kicad_pro       # KiCad project file
│   ├── bGeigieScint.kicad_sch       # Schematic (organized in functional blocks)
│   ├── bGeigieScint.kicad_pcb       # PCB layout (4-layer, 40×100mm)
│   ├── bGeigieScint-backups/        # Automatic backups
│   ├── firmware/                    # Firmware source code
│   │   └── PomeloCore/              # Main firmware project
│   ├── bootloader/                  # Bootloader files
│   │   └── uf2-samd21/              # UF2 bootloader for SAMD21
│   ├── v1_2/                        # Version 1.2 reference files
│   │   ├── schematic/               # V1.2 schematic PDF
│   │   ├── firmware/                # V1.2 firmware
│   │   └── bootloader/              # V1.2 bootloader
│   ├── Images/                      # Project images and photos
│   └── Misc Docs/                   # Additional documentation
├── BOM.csv                          # Bill of Materials
├── Python scripts (*.py)            # KiCad automation scripts
└── README.md                        # This file

🎨 Schematic Organization

The schematic is organized into 7 functional blocks:

1. USB & POWER INPUT: USB-C interface, power connectors, reset button
2. POWER MANAGEMENT: LDOs, inductors, power distribution
3. MCU CORE: Microcontroller, crystal, decoupling
4. ANALOG FRONTEND: SiPM signal chain, opamps, comparators
5. LOGIC & CONTROL: Digital logic, latches, level shifters
6. EXPANSION I/O: Pin headers for external connections
7. DEBUG & TEST: J-LINK interface, test points

🔌 Pinout & Interfaces

J-LINK Debug Header (10-pin)

1: VCC        2: SWDIO
3: GND        4: SWCLK
5: GND        6: SWO
7: NC         8: NC
9: GND       10: RESET

Expansion Headers

• H2, H3: 7-pin GPIO expansion
• H5: 7-pin expansion with labeled signals
• MEAS1: 2-pin measurement header
• P1, P2: 2×2 power connectors (mirrored on Pomelo Physics board)

Key Signals

📊 Version History

V1.3 (Current)

Major improvements over V1.2:

✅ Added (47 components):

• USB-C connector (USBC1)
• Reset button (BUT1)
• J-LINK debug header
• 18 test points (TP1-TP18)
• Additional transistors (Q4, Q5) and diodes (D6, D8, D10)
• 15 new resistors for better signal conditioning

✅ Changed:

• C44: 1uF → 4.7uF
• C45: 4.7uF → 1uF
• H2, H3: 6-pin → 7-pin headers (expanded)

✅ Enhanced:

• Better debugging capability
• Improved power filtering
• More flexible I/O expansion

V1.2 (Legacy)

• Initial production version
• PDF schematic available in v1_2/schematic/

🚀 Getting Started

Prerequisites

• KiCad 9.0 or later
• Basic understanding of radiation detection and SiPM operation
• JTAG/SWD programmer (e.g., J-Link, ST-Link)

Opening the Project

1. Clone this repository
2. Open bGeigieScint/bGeigieScint.kicad_pro in KiCad
3. The schematic shows functional blocks with dashed rectangles
4. The PCB has components organized by function

Manufacturing

PCB Specifications:

• Layers: 4 (signal/GND/VCC/signal)
• Dimensions: 40mm × 100mm
• Thickness: 1.6mm
• Copper: 35μm (1oz) on all layers
• Min Track/Space: 0.15mm / 0.15mm (for 0805 components)
• Finish: HASL or ENIG recommended
• Solder Mask: Green (top and bottom)

Assembly Notes:

• Minimum component size: 0805 for passives
• QFN-48 MCU requires reflow soldering
• LDOs are SOT-23-5 packages
• Test points for easy debugging

📝 Design Notes

Power Planes

• Layer 1 (In1.Cu): GND plane - solid pour for low noise
• Layer 2 (In2.Cu): VCC plane - split for 3.3V/3.0V rails

Critical Traces

• Keep SiPM analog traces short and shielded
• HV traces (Vbias) should be isolated from digital signals
• Crystal traces should be short with GND guard ring

Component Placement

Components are organized into functional blocks:

• Power supply on left side
• MCU in center
• Analog section on right
• Digital logic bottom-right

🔬 Applications

• Radiation detection and measurement
• Scintillation counting
• Environmental monitoring
• Educational radiation physics
• DIY Geiger counter replacement with better sensitivity

👥 Credits

Original Designer: Mihai Cuciuc (M. Cuciuc) Original Repository: github.com/mihaicuciuc/pomelo Organization: Safecast Date: 2024-2025

Safecast appreciates the great work that Mihai has done and made publicly available. This project builds upon the original Pomelo design.

📄 License

• Hardware Design (schematics, PCB layouts, design files): CC0 1.0 Universal
• Firmware and Software: MIT License

This project is completely open source and free to use, modify, and distribute.

🤝 Contributing

Contributions are welcome! Please:

1. Fork the repository
2. Create a feature branch
3. Make your changes
4. Submit a pull request

For major changes, please open an issue first to discuss what you would like to change.

📞 Support

• Project Page: Pomelo on Crowd Supply
• Safecast: https://safecast.org
• Report issues through the repository's issue tracker

⚠️ Safety Warning

This board generates high voltage (up to 70V) for SiPM biasing. Handle with care:

• Do not touch HV traces while powered
• Use proper ESD protection
• Follow safe electronics handling practices
• Designed for educational and research purposes

Made with ❤️ for the radiation detection community