
Wheellino esp32
m-marini/wheellino
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…

The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…
Wheellino is an open-source printed circuit board by m-marini, from the m-marini/wheellino repository on GitHub, published under the MIT licence. It is a 2-layer board with 44 parts on 43 nets.
It is built around the ESP8266EX. Its parts include 16 connectors, 11 resistors, 7 diodes, 5 capacitors and 1 IC. It belongs with the ESP8266 boards of this library.
Wheelly is a wheels robot.
The robot consits of
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific direction and speed by feeding back from gyroscpe and speed sensors and comunicate with remote server via wifi sending status and receiving commands.
Documentation in Wiki
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9, R10, R11 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D6, D7 |
| 2 | 1n | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C4, C5 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 12V | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J11 |
| 1 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U1 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | Analog | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Control LED | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | Digital 0-7 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital 8-13 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESP8266 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J9 |
| 1 | Front sensor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | GY527 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | LED LB | LED_THT:LED_D5.0mm | D3 |
| 1 | LED LF | LED_THT:LED_D5.0mm | D2 |
| 1 | LED RB | LED_THT:LED_D5.0mm | D5 |
| 1 | LED RF | LED_THT:LED_D5.0mm | D4 |
| 1 | Left wheel sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Motors driver | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J8 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Rear sensor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | Right wheel sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | SR04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | WiFi Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
The 40 most common of 44 parts.

m-marini/wheellino
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…

m-marini/wheellino
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…

m-marini/wheellino
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…

m-marini/wheellino
The ESP32 controller is driving all the units to allow the robot to collect the sensor data, compute the position relative the initial state, drive the proxcimity sensor direction, drive the robot for a specific…

MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver


windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器

Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...



Jana-Marie/Enlightened-Otter
Enlighted-Otter is an Open-Source and OSHW work-light for hacker/maker events like the chaos communication congress, which can be screwed onto a club mate bottle.

44 parts, built around the ESP8266EX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the m-marini/wheellino repository on GitHub, at the commit this page was made from: the board is KC/wheellino-2.0/wheellino.kicad_pcb and its schematic KC/head/cam-head/cam-head.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).