2 layers60.5 × 30 mm
Ps4
lusmdl/MySimRacingCore
designed to manage steering, pedals, and other accessories, providing a seamless and immersive racing experience
7 parts2MIT
2 layers69 × 39 mm
MySimRacingCore
lusmdl/MySimRacingCore2designed to manage steering, pedals, and other accessories, providing a seamless and immersive racing experience
- Size
- 69 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 37
- Pads
- 92
- Tracks, vias
- 161, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2024
- Updated
- 10 May 2025
Overview
MySimRacingCore is an open-source printed circuit board by lusmdl, from the lusmdl/MySimRacingCore repository on GitHub, published under the MIT licence. It is a 2-layer board of 69 × 39 mm with 14 parts on 37 nets, routed with 161 tracks and 21 vias.
It is built around the RJ45. Its parts include 10 connectors and 4 resistors.
Main components
1README
kicad/PS4_joystick_footprint/README.mdPS4_joystick_footprint
PS4 Joystick Footprint for Kicad
This footprint has been tested using a breakout PCB, whch is also available here
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | RJ45 | Connector_RJ:RJ45_Molex_0855135013_Vertical | J7, J8 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Left | J1.2 |
| 1 | BTS7906B Motor Driver | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J9 |
| 1 | Digital | Connector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Left | J1.1 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J4 |
| 1 | Handbrake | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMD | J5 |
| 1 | Joystick | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J3 |
| 1 | PCF8574 I²C | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMD | J6 |
| 1 | Pedals | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
More from lusmdl/MySimRacingCore
1Similar boards
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm
Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
How big is the MySimRacingCore PCB?
It measures 69 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MySimRacingCore use?
14 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MySimRacingCore KiCad files?
From the lusmdl/MySimRacingCore repository on GitHub, at the commit this page was made from: the board is kicad/circuit/circuit.kicad_pcb and its schematic kicad/PS4_joystick_footprint/ps4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MySimRacingCore design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).