
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Simple 4 by 4 macropad with backlight
Onu is an open-source printed circuit board by luke-biel, from the luke-biel/onu repository on GitHub. It is a 2-layer board of 93.3 × 99.7 mm with 35 parts on 50 nets, routed with 191 tracks and 20 vias.
It is built around the WS2812B. Its parts include 17 diodes, 14 switches, 3 capacitors and 1 IC. It belongs with the keyboards and input boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D15, D16 |
| 14 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW11, SW12, SW13, SW21, SW22, SW23, SW31, SW32, SW33, SW34, SW41, SW42, SW43, SW44 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D17, D18, D19 |
| 1 | Arduino_Micro | Arduino:Arduino_Micro | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 93.3 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the luke-biel/onu repository on GitHub, at the commit this page was made from: the board is onu.kicad_pcb and its schematic onu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask luke-biel before reusing the design.