4 layers130 × 95 mm
Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
183 parts
2 layers
PM microprocesor devboard
Luk9091/FIT_Microprocessor_cloneFIT PM and TCM dev board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 178
- Pads
- 254
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Mar 2026
- Updated
- 10 Mar 2026
Overview
PM microprocesor devboard is an open-source printed circuit board by Luk9091, from the Luk9091/FIT_Microprocessor_clone repository on GitHub. It is a 2-layer board with 26 parts on 178 nets.
It is built around the ATXMEGA128A3U-AU, SN74LVC1G17DBV and SN74LVC3G17DCU, with the ADT7311WTR, DAC8554IPW and S25FL064LABMFI01 among its other parts. Its parts include 6 capacitors, 5 connectors, 2 resistors, 2 diodes and 1 IC. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATXMEGA128A3U-AU
TQFP-64(14x14)-40℃~+85℃ 1.6V~3.6V 128KB 12bit 12bit 2KB 32MHz 50 8/16 Bit 8KB AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
SN74LVC1G17DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.6ns@3.3V,15pF 74LVC Power-off isolation、Level shifting Push-pull Schmitt trigger Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/Transceiver
SN74LVC3G17DCU
VSSOP-8-0.5mm-40℃~+125℃ 1.65V~5.5V 10uA 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Power-off isolation、Hot-swap support Push-pull Schmitt trigger Unidirectional VSSOP-8-0.5mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
ADT7311WTR
SOIC8±0.5°C Accurate, 16-Bit Digital SPI Temperature SensorAnalog DevicesUncategorised
DAC8554IPW
TSSOP-16-40℃~+105℃ 10us 16 2.7V~5.5V 4 4LSB 700nA SPI Voltage Buffer TSSOP-16 Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DAC)S25FL064LABMFI01
SOIC864 Mb (8 MB), 3V, FL-L SPI Flash MemoryInfineon TechnologiesUncategorised
CDCE62005RGZ
QFN485/10 Outputs Clock Generator/Jitter Cleaner with Integrated Dual VCOTexas InstrumentsUncategorised
LM3940IMP-3.3
SOT-223-40℃~+125℃@(Tj) 1 10mA 1A 250uVrms 3.3V 5.5V 500mV@(1A) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LTC2906ITS8
SOT23-8Precision Dual Supply Monitors with One Pin-Selectable Threshold and One Adjustable InputAnalog DevicesUncategorised
README
README.mdFIT PM and TCM mikroprocesor dev board
Main goal is create simple dev board to test mikroprocesor code in stable and save environment without risk on main boards.
PM set up
- Voltage control
- Temperature measurements (check overheat behaviour)
- Clock management (with easy way to spy input and output clock signal)
- Communication via HDMI (with additional pin header for other device or spy)
- DAC manager
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | ADT7311WTR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | DA1, DA1 |
| 1 | 0.1µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 0.33µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 0.47µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 10µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 16M | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | 20µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 3.3µ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | ATxmega128A3U-A | Package_QFP:TQFP-64_14x14mm_P0.8mm | U1 |
| 1 | CDCE62005 | Package_DFN_QFN:Texas_RGZ0048A_VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | DD1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | DAC8554 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | DA2 |
| 1 | HDMI_A | Connector_Video:HDMI_A_Molex_208658-1001_Horizontal | J1 |
| 1 | LM3940IMP | Package_TO_SOT_SMD:SOT-223 | DA6 |
| 1 | LTC2906ITS8 | Package_TO_SOT_SMD:TSOT-23-8 | DA3 |
| 1 | Main Power LED 5V | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Power Supply LED 3V3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | S25FL064LABMFI01 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | DD2 |
| 1 | SN74LVC1G17DBV | Package_TO_SOT_SMD:SOT-23-5 | DA4 |
| 1 | SN74LVC3G17 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | DD3 |
Questions
What parts does the PM microprocesor devboard use?
26 parts, built around the ATXMEGA128A3U-AU, SN74LVC1G17DBV, SN74LVC3G17DCU and ADT7311WTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PM microprocesor devboard KiCad files?
From the Luk9091/FIT_Microprocessor_clone repository on GitHub, at the commit this page was made from: the board is PM_microprocesor_devboard/PM_microprocesor_devboard.kicad_pcb and its schematic PM_microprocesor_devboard/PM_microprocesor_devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PM microprocesor devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Luk9091 before reusing the design.
Similar boards
- 2 layers101.6 × 53.3 mm
MFC
NadjB/Hard_Instru_Mass_Flow_Controller
Custom board to control multiple Mass Flow Controllers
40 parts - 2 layers42.2 × 25.4 mm
Torchic
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team
27 parts2 - 2 layers85 × 75 mm
Pivi shield
sentrisense/pivi-hardware
Part of the PIVI smart meter. Kicad designs of the PIVI sensor board.
120 parts1 - 4 layers
- 2 layers50 × 50 mm
- 2 layers76 × 68 mm
- 2 layers55 × 69.5 mm
