
SN74LVC3G17DCU
Texas InstrumentsExtended
-40℃~+125℃ 1.65V~5.5V 10uA 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Power-off isolation、Hot-swap support Push-pull Schmitt trigger Unidirectional VSSOP-8-0.5mm Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC3G17DCU
- Category
- Buffers, Drivers, Receivers, Transceivers
- Package
- VSSOP-8-0.5mm
- Pins
- 8
- In stock
- 9,973 at JLCPCB (C68245)
- Used on
- 4 open-source boards
Overview
The SN74LVC3G17DCU is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a VSSOP-8-0.5mm package with 8 pins. -40℃~+125℃ 1.65V~5.5V 10uA 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Power-off isolation、Hot-swap support Push-pull Schmitt trigger Unidirectional VSSOP-8-0.5mm Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC3G17, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 9,973 are in stock at JLCPCB (part C68245). 4 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
8- Supply, least
- 1.65 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 4
- Works up to
- 125 °C · Operating free-air temperature max · p. 4
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 5
- A pin gives at most
- 50 mA · Continuous output current absolute max, source or sink · p. 4
- Junction to air (DCU (VSSOP))
- 227 K/W · Junction-to-ambient thermal resistance · p. 5
What it is and has
5- Function
- Three independent noninverting Schmitt-trigger buffers, Y = A · p. 9
- Input voltage tolerance
- 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Protection
- Ioff supports live insertion, partial-power-down mode and back drive protection · p. 9
- Package
- VSSOP (8), 2.30 mm × 2.00 mm body · p. 1
Around it
1- cap 0.1-μF
- between VCC and GND; Supply bypass capacitor; install as close to the power terminal as possible. · p. 11
Specifications
99| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage VI | Over operating free-air temperature range; footnote (2) | min -0.5 · max 6.5 V | 4 |
| Voltage applied to any output in the high-impedance or power-off state VO | Over operating free-air temperature range; footnote (2) | min -0.5 · max 6.5 V | 4 |
| Output voltage VO | Maximum is VCC + 0.5 V; footnotes (2), (3) | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | ±50 mA rating | max 50 mA | 4 |
| Continuous current through VCC or GND | ±100 mA rating | max 100 mA | 4 |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge VESD | Human Body Model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | max 2000 V | 4 |
| Electrostatic discharge VESD | Charged-Device Model (CDM), per JEDEC specification JESD22-C101, all pins | max 1000 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 4 |
| Input voltage VI | min 0 · max 5.5 V | 4 | |
| Output voltage VO | Maximum is VCC | min 0 V | 4 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 4 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 4 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 4 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 4 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 4 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 4 |
| Operating free-air temperature TA | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | DCU (VSSOP); calculated in accordance with JESD 51-7 | typ 227 °C/W | 5 |
| Positive-going input threshold voltage VT+ | VCC = 1.65 V; –40°C to 85°C | min 0.79 · max 1.16 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 1.65 V; –40°C to 125°C | min 0.79 · max 1.16 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 2.3 V; –40°C to 85°C | min 1.11 · max 1.56 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 2.3 V; –40°C to 125°C | min 1.11 · max 1.56 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 3 V; –40°C to 85°C | min 1.5 · max 1.87 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 3 V; –40°C to 125°C | min 1.5 · max 1.87 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 4.5 V; –40°C to 85°C | min 2.16 · max 2.74 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 4.5 V; –40°C to 125°C | min 2.16 · max 2.74 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 5.5 V; –40°C to 85°C | min 2.61 · max 3.33 V | 5 |
| Positive-going input threshold voltage VT+ | VCC = 5.5 V; –40°C to 125°C | min 2.61 · max 3.33 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 1.65 V; –40°C to 85°C | min 0.39 · max 0.62 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 1.65 V; –40°C to 125°C | min 0.39 · max 0.62 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 2.3 V; –40°C to 85°C | min 0.58 · max 0.87 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 2.3 V; –40°C to 125°C | min 0.58 · max 0.87 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 3 V; –40°C to 85°C | min 0.84 · max 1.14 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 3 V; –40°C to 125°C | min 0.84 · max 1.14 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 4.5 V; –40°C to 85°C | min 1.41 · max 1.79 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 4.5 V; –40°C to 125°C | min 1.41 · max 1.79 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 5.5 V; –40°C to 85°C | min 1.87 · max 2.29 V | 5 |
| Negative-going input threshold voltage VT– | VCC = 5.5 V; –40°C to 125°C | min 1.87 · max 2.29 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 1.65 V; –40°C to 85°C | min 0.37 · max 0.62 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 1.65 V; –40°C to 125°C | min 0.37 · max 0.62 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 2.3 V; –40°C to 85°C | min 0.48 · max 0.77 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 2.3 V; –40°C to 125°C | min 0.48 · max 0.77 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 3 V; –40°C to 85°C | min 0.56 · max 0.87 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 3 V; –40°C to 125°C | min 0.56 · max 0.87 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 4.5 V; –40°C to 85°C | min 0.71 · max 1.04 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 4.5 V; –40°C to 125°C | min 0.71 · max 1.04 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 5.5 V; –40°C to 85°C | min 0.71 · max 1.11 V | 5 |
| Hysteresis VT+ – VT– ΔVT | VCC = 5.5 V; –40°C to 125°C | min 0.71 · max 1.11 V | 5 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; –40°C to 85°C | min 1.2 V | 5 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; –40°C to 125°C | min 1.2 V | 5 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; –40°C to 85°C | min 1.9 V | 5 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; –40°C to 125°C | min 1.9 V | 5 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; –40°C to 85°C | min 2.4 V | 5 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; –40°C to 125°C | min 2.4 V | 5 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; –40°C to 85°C | min 2.3 V | 5 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; –40°C to 125°C | min 2.3 V | 5 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; –40°C to 85°C | min 3.8 V | 5 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; –40°C to 125°C | min 3.8 V | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 0.1 V | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 0.1 V | 5 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 85°C | max 0.45 V | 5 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 125°C | max 0.45 V | 5 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 85°C | max 0.3 V | 5 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 125°C | max 0.3 V | 5 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 85°C | max 0.4 V | 5 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 125°C | max 0.4 V | 5 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 85°C | max 0.55 V | 5 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 125°C | max 0.75 V | 5 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 85°C | max 0.55 V | 5 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 125°C | max 0.75 V | 5 |
| II II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 85°C; ±1 uA limit | max 1 uA | 5 |
| II II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 125°C; ±5 uA limit | max 5 uA | 5 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; –40°C to 85°C; ±5 uA limit | max 5 uA | 5 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; –40°C to 125°C; ±10 uA limit | max 10 uA | 5 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 10 uA | 5 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 10 uA | 5 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 85°C | max 500 uA | 5 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 125°C | max 500 uA | 5 |
| CI CI | VI = VCC or GND; VCC = 3.3 V; TA = 25°C | typ 4 pF | 5 |
| tpd tpd | A to Y; See Figure 3; VCC = 1.8 V ± 0.15 V; –40°C to 85°C; first printed row | min 4.3 · max 9.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 2.5 V ± 0.2 V; –40°C to 85°C; first printed row | min 2 · max 6.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 3.3 V ± 0.3 V; –40°C to 85°C; first printed row | min 1.2 · max 5.4 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 5 V ± 0.5 V; –40°C to 85°C; first printed row | min 1 · max 4.1 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 1.8 V ± 0.15 V; –40°C to 85°C; second printed row | min 4.3 · max 10.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 2.5 V ± 0.2 V; –40°C to 85°C; second printed row | min 2 · max 7.2 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 3.3 V ± 0.3 V; –40°C to 85°C; second printed row | min 1.2 · max 6.4 ns | 6 |
| tpd tpd | A to Y; See Figure 3; VCC = 5 V ± 0.5 V; –40°C to 85°C; second printed row | min 1 · max 5.1 ns | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; VCC = 1.8 V; TA = 25°C | typ 18 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; VCC = 2.5 V; TA = 25°C | typ 19 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; VCC = 3.3 V; TA = 25°C | typ 19 pF | 6 |
| Power dissipation capacitance Cpd | f = 10 MHz; VCC = 5 V; TA = 25°C | typ 22 pF | 6 |
Pins, by the datasheet
8- 1 1A
- Input 1 · p. 3
- 2 3Y
- Output 3 · p. 3
- 3 2A
- Input 2 · p. 3
- 4 GND
- Ground · p. 3
- 5 2Y
- Output 2 · p. 3
- 6 3A
- Input 3 · p. 3
- 7 1Y
- Output 1 · p. 3
- 8 VCC
- Power Pin · p. 3
Ordering codes, by the datasheet
4- SN74LVC3G17DCUR
- VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU | SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCUR.B
- VSSOP (DCU), 8 pins · 3000, LARGE T&R; SN lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCURG4
- VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
- SN74LVC3G17DCURG4.B
- VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU lead finish; -40 to 125°C · p. 14
Open-source boards using it
4- 2 layers

- 4 layers130 × 95 mm

Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
183 parts - 2 layers130 × 95 mm

Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
166 parts - 2 layers130 × 95 mm

Before
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
162 parts
Parts like it
8SN74AVC2T45DCU
VSSOP-8-40℃~+85℃ 1 1.2V~3.6V 12mA 12mA 2 2.4ns@3.3V,50pF 20uA 74AVC Bidirectional Tri-State VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G126DCUR
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4ns@3.3V,50pF 74LVC Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G240DCU
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.6ns@3.3V,50pF 74LVC Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G241DCU
VSSOP-8-40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.1ns@3.3V,50pF 74LVC Power-off isolation、Output enable Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G34DCU
VSSOP-8-40℃~+125℃ 1.65V~5.5V 10uA 24mA 24mA 3 3 4.1ns@3.3V,50pF 74LVC Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G07DCU
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 3 3.7ns@3.3V,50pF 32mA 74LVC Open-drain Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G125DCU
VSSOP-8-40℃~+85℃ 0.8V~2.7V 1 1.8ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUP3G34DCU
VSSOP-8-40℃~+85℃ 0.8V~3.6V 0.9uA 1 2.4ns@3.3V,5pF 3 4mA 4mA 74AUP Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
Questions
Is there a KiCad symbol and footprint for the SN74LVC3G17DCU?
Yes. The symbol is 74xGxx:74LVC3G17 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC3G17DCU?
VSSOP-8-0.5mm, with 8 pins. Its footprint is drawn on this page.
Where is the SN74LVC3G17DCU datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC3G17DCU?
JLCPCB lists it as part C68245, with 9,973 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC3G17DCU?
Parts like it in the library: the SN74AVC2T45DCU by Texas Instruments, the SN74LVC2G126DCUR by Texas Instruments, the SN74LVC2G240DCU by Texas Instruments and the SN74LVC2G241DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC3G17DCU?
4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.