
SN74LVC2G241DCU
Texas InstrumentsExtended
-40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.1ns@3.3V,50pF 74LVC Power-off isolation、Output enable Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC2G241DCU
- Category
- Buffers, Drivers, Receivers, Transceivers
- Package
- VSSOP-8
- Pins
- 8
- In stock
- 4,588 at JLCPCB (C10430)
- Used on
- 6 open-source boards
Overview
The SN74LVC2G241DCU is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a VSSOP-8 package with 8 pins. -40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.1ns@3.3V,50pF 74LVC Power-off isolation、Output enable Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC2G241, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 4,588 are in stock at JLCPCB (part C10430). 6 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.65 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 85 °C · Operating free-air temperature max · p. 5
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 5
- A pin gives at most
- 50 mA · Continuous output current absolute max magnitude, ±50 mA · p. 4
- Junction to air (DCU (VSSOP))
- 227 K/W · Junction-to-ambient thermal resistance · p. 5
What it is and has
5- Function
- Dual buffer and driver with three-state outputs · p. 1
- Input voltage tolerance
- Up to 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Protection
- Ioff supports live insertion, partial power-down and back-drive protection · p. 1
- Package
- DCU, 8-Pin VSSOP · p. 3
Around it
1- cap 0.1-μF
- between VCC and GND; Recommended bypass capacitor for a single supply; install as close to the power pin as possible. · p. 10
Specifications
103| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage VI | over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage applied to any output in the high-impedance or power-off state VO | over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage applied to any output in the high or low state VO | Maximum is VCC + 0.5 V | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | ±50 mA rating | max 50 mA | 4 |
| Continuous current through VCC or GND | ±100 mA rating | max 100 mA | 4 |
| Maximum junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101, all pins; ±1000 V | max 1000 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 4 |
| Supply voltage VCC | Data retention only | min 1.5 V | 4 |
| High-level input voltage VIH | VCC = 2.3 V to 2.7 V | min 1.7 V | 4 |
| High-level input voltage VIH | VCC = 3 V to 3.6 V | min 2 V | 4 |
| Low-level input voltage VIL | VCC = 2.3 V to 2.7 V | max 0.7 V | 4 |
| Low-level input voltage VIL | VCC = 3 V to 3.6 V | max 0.8 V | 4 |
| Input voltage VI | min 0 · max 5.5 V | 4 | |
| Output voltage VO | High or low state; maximum VCC | min 0 V | 4 |
| Output voltage VO | 3-state | min 0 · max 5.5 V | 4 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 4 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 4 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 4 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 5 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 5 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3 V ± 0.3 V | max 10 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 5 V ± 0.5 V | max 5 ns/V | 5 |
| Operating free-air temperature TA | min -40 · max 85 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | SN74LVC2G241, DCU (VSSOP), 8 PINS | typ 227 °C/W | 5 |
| VOH VOH | –40°C to 85°C; IOH = –4 mA; VCC = 1.65 V | min 1.2 V | 5 |
| VOH VOH | –40°C to 125°C; IOH = –4 mA; VCC = 1.65 V | min 1.2 V | 5 |
| VOH VOH | –40°C to 85°C; IOH = –8 mA; VCC = 2.3 V | min 1.9 V | 5 |
| VOH VOH | –40°C to 125°C; IOH = –8 mA; VCC = 2.3 V | min 1.9 V | 5 |
| VOH VOH | –40°C to 85°C; IOH = –16 mA; VCC = 3 V | min 2.4 V | 5 |
| VOH VOH | –40°C to 125°C; IOH = –16 mA; VCC = 3 V | min 2.4 V | 5 |
| VOH VOH | –40°C to 85°C; IOH = –24 mA; VCC = 3 V | min 2.3 V | 5 |
| VOH VOH | –40°C to 125°C; IOH = –24 mA; VCC = 3 V | min 2.3 V | 5 |
| VOH VOH | –40°C to 85°C; IOH = –32 mA; VCC = 4.5 V | min 3.8 V | 5 |
| VOH VOH | –40°C to 125°C; IOH = –32 mA; VCC = 4.5 V | min 3.8 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 100 uA; VCC = 1.65 V to 5.5 V | max 0.1 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 100 uA; VCC = 1.65 V to 5.5 V | max 0.1 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 4 mA; VCC = 1.65 V | max 0.45 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 4 mA; VCC = 1.65 V | max 0.45 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 8 mA; VCC = 2.3 V | max 0.3 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 8 mA; VCC = 2.3 V | max 0.3 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 16 mA; VCC = 3 V | max 0.4 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 16 mA; VCC = 3 V | max 0.4 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 24 mA; VCC = 3 V | max 0.55 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 24 mA; VCC = 3 V | max 0.55 V | 5 |
| VOL VOL | –40°C to 85°C; IOL = 32 mA; VCC = 4.5 V | max 0.55 V | 5 |
| VOL VOL | –40°C to 125°C; IOL = 32 mA; VCC = 4.5 V | max 0.75 V | 5 |
| A or OE inputs II | –40°C to 85°C; VI = 5.5 V or GND; VCC = 0 to 5.5 V; ±5 uA | max 5 uA | 5 |
| A or OE inputs II | –40°C to 125°C; VI = 5.5 V or GND; VCC = 0 to 5.5 V; ±5 uA | max 5 uA | 5 |
| Ioff Ioff | –40°C to 85°C; VI or VO = 5.5 V; VCC = 0; ±10 uA | max 10 uA | 5 |
| Ioff Ioff | –40°C to 125°C; VI or VO = 5.5 V; VCC = 0; ±10 uA | max 10 uA | 5 |
| IOZ IOZ | –40°C to 85°C; VO = 0 to 5.5 V; VCC = 3.6 V | max 10 uA | 5 |
| IOZ IOZ | –40°C to 125°C; VO = 0 to 5.5 V; VCC = 3.6 V | max 10 uA | 5 |
| ICC ICC | –40°C to 85°C; VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V | max 10 uA | 5 |
| ICC ICC | –40°C to 125°C; VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V | max 10 uA | 5 |
| ΔICC ΔICC | –40°C to 85°C; One input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 V | max 500 uA | 5 |
| ΔICC ΔICC | –40°C to 125°C; One input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 V | max 500 uA | 5 |
| Data Inputs Ci | VI = VCC or GND; VCC = 3.3 V; –40°C to 85°C column | typ 3.5 pF | 5 |
| Control Inputs Ci | VI = VCC or GND; VCC = 3.3 V; –40°C to 85°C column | typ 4 pF | 5 |
| Co Co | VO = VCC or GND; VCC = 3.3 V; –40°C to 85°C column | typ 6.5 pF | 5 |
| tpd tpd | –40°C to 85°C; A to Y; VCC = 1.8 V ± 0.15 V | min 3.3 · max 9.1 ns | 6 |
| tpd tpd | –40°C to 85°C; A to Y; VCC = 2.5 V ± 0.2 V | min 1.5 · max 5.5 ns | 6 |
| tpd tpd | –40°C to 85°C; A to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 4.3 ns | 6 |
| tpd tpd | –40°C to 85°C; A to Y; VCC = 5 V ± 0.5 V | min 1 · max 4 ns | 6 |
| ten ten | –40°C to 85°C; OE to Y; VCC = 1.8 V ± 0.15 V | min 4 · max 9.9 ns | 6 |
| ten ten | –40°C to 85°C; OE to Y; VCC = 2.5 V ± 0.2 V | min 1.3 · max 6.6 ns | 6 |
| ten ten | –40°C to 85°C; OE to Y; VCC = 3.3 V ± 0.3 V | min 1.2 · max 4.7 ns | 6 |
| ten ten | –40°C to 85°C; OE to Y; VCC = 5 V ± 0.5 V | min 1.1 · max 5 ns | 6 |
| tdis tdis | –40°C to 85°C; OE to Y; VCC = 1.8 V ± 0.15 V | min 1.5 · max 11.6 ns | 6 |
| tdis tdis | –40°C to 85°C; OE to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 5.7 ns | 6 |
| tdis tdis | –40°C to 85°C; OE to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 4.6 ns | 6 |
| tdis tdis | –40°C to 85°C; OE to Y; VCC = 5 V ± 0.5 V | min 0.5 · max 4.2 ns | 6 |
| tpd tpd | –40°C to 125°C (Recommended); A to Y; VCC = 1.8 V ± 0.15 V | min 3.3 · max 10.1 ns | 6 |
| tpd tpd | –40°C to 125°C (Recommended); A to Y; VCC = 2.5 V ± 0.2 V | min 1.5 · max 5.6 ns | 6 |
| tpd tpd | –40°C to 125°C (Recommended); A to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 5.3 ns | 6 |
| tpd tpd | –40°C to 125°C (Recommended); A to Y; VCC = 5 V ± 0.5 V | min 1 · max 4.2 ns | 6 |
| ten ten | –40°C to 125°C (Recommended); OE to Y; VCC = 1.8 V ± 0.15 V | min 4 · max 10.9 ns | 6 |
| ten ten | –40°C to 125°C (Recommended); OE to Y; VCC = 2.5 V ± 0.2 V | min 1.3 · max 6.6 ns | 6 |
| ten ten | –40°C to 125°C (Recommended); OE to Y; VCC = 3.3 V ± 0.3 V | min 1.2 · max 5.7 ns | 6 |
| ten ten | –40°C to 125°C (Recommended); OE to Y; VCC = 5 V ± 0.5 V | min 1.2 · max 4.3 ns | 6 |
| tdis tdis | –40°C to 125°C (Recommended); OE to Y; VCC = 1.8 V ± 0.15 V | min 1.5 · max 12.6 ns | 6 |
| tdis tdis | –40°C to 125°C (Recommended); OE to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 6.6 ns | 6 |
| tdis tdis | –40°C to 125°C (Recommended); OE to Y; VCC = 3.3 V ± 0.3 V | min 1.4 · max 5.6 ns | 6 |
| tdis tdis | –40°C to 125°C (Recommended); OE to Y; VCC = 5 V ± 0.5 V | min 1 · max 3.9 ns | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs enabled; VCC = 1.8 V | typ 19 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs enabled; VCC = 2.5 V | typ 19 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs enabled; VCC = 3.3 V | typ 20 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs enabled; VCC = 5 V | typ 22 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs disabled; VCC = 1.8 V | typ 2 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs disabled; VCC = 2.5 V | typ 2 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs disabled; VCC = 3.3 V | typ 2 pF | 6 |
| Power dissipation capacitance per buffer/driver Cpd | TA = 25°C; f = 10 MHz; Outputs disabled; VCC = 5 V | typ 3 pF | 6 |
Pins, by the datasheet
8- 1 1OE
- Output enable (Active low) · p. 3
- 2 1A
- Input · p. 3
- 3 2Y
- Output · p. 3
- 4 GND
- Ground · p. 3
- 5 2A
- Input · p. 3
- 6 1Y
- Output · p. 3
- 7 2OE
- Output enable (Active high) · p. 3
- 8 VCC
- Power pin · p. 3
Open-source boards using it
6- 6 layers122 × 61.5 mm

- 4 layers74 × 52 mm

- 4 layers160 × 80 mm

- 4 layers27.7 × 63.5 mm

Esp header 4 Layers
snakebot-tohoku/esp_header_4_Layers
4-layer PCB board designed as header for ESP32-S3 developer board to interface up to 15 motors and 15 analog sensors.
28 parts - 4 layers36 × 56 mm

Dynamixel control
introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…
55 parts20 - 4 layers100 × 75 mm

Parts like it
8SN74AVC2T45DCU
VSSOP-8-40℃~+85℃ 1 1.2V~3.6V 12mA 12mA 2 2.4ns@3.3V,50pF 20uA 74AVC Bidirectional Tri-State VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G126DCUR
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4ns@3.3V,50pF 74LVC Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC2G240DCU
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.6ns@3.3V,50pF 74LVC Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G17DCU
VSSOP-8-0.5mm-40℃~+125℃ 1.65V~5.5V 10uA 3 32mA 32mA 5.4ns@3.3V,50pF 74LVC Power-off isolation、Hot-swap support Push-pull Schmitt trigger Unidirectional VSSOP-8-0.5mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G34DCU
VSSOP-8-40℃~+125℃ 1.65V~5.5V 10uA 24mA 24mA 3 3 4.1ns@3.3V,50pF 74LVC Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC3G07DCU
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 10uA 3 3.7ns@3.3V,50pF 32mA 74LVC Open-drain Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUC2G125DCU
VSSOP-8-40℃~+85℃ 0.8V~2.7V 1 1.8ns@1.8V,15pF 10uA 2 74AUC 9mA 9mA Tri-State Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74AUP3G34DCU
VSSOP-8-40℃~+85℃ 0.8V~3.6V 0.9uA 1 2.4ns@3.3V,5pF 3 4mA 4mA 74AUP Unidirectional VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
Questions
Is there a KiCad symbol and footprint for the SN74LVC2G241DCU?
Yes. The symbol is 74xGxx:74LVC2G241 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC2G241DCU?
VSSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the SN74LVC2G241DCU datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC2G241DCU?
JLCPCB lists it as part C10430, with 4,588 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC2G241DCU?
Parts like it in the library: the SN74AVC2T45DCU by Texas Instruments, the SN74LVC2G126DCUR by Texas Instruments, the SN74LVC2G240DCU by Texas Instruments and the SN74LVC3G17DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC2G241DCU?
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.