
StackChanPwd
lipoyang/StackChanPwd
M5Stack-embedded super cute humanoid controller unit

4-layer PCB board designed as header for ESP32-S3 developer board to interface up to 15 motors and 15 analog sensors.
Esp header 4 Layers is an open-source printed circuit board by snakebot-tohoku, from the snakebot-tohoku/esp_header_4_Layers repository on GitHub. It is a 4-layer board of 27.7 × 63.5 mm with 28 parts on 43 nets, routed with 170 tracks and 48 vias.
It is built around the SN74LVC2G241DCU, B3B-EH-A and BM05B-SRSS-TB, with the BM02B-SRSS-TB and MS50N06 among its other parts. Its parts include 8 resistors, 8 connectors, 4 diodes, 3 capacitors and 2 ICs.
KiCad version: 10.0
4-layer PCB board designed as header for ESP32-S3 developer board to interface up to 15 motors and 15 analog sensors.
Top Layer: Components and analog signals
Layer 1: GND plane
Layer 2: 6V Power plane
Bottom layer: 3V power and digital signals
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R8 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R9, R10 |
| 3 | B3B-EH-A | esp_board:JST-B3B-EH-A | J7, J8, J9 |
| 3 | BM05B-SRSS | esp_board:JST_BM05B-SRSS-TB | J10, J11, J12 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | LED RED | LED_SMD:LED_0603_1608Metric | D4, D5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 47uF@10V | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | BM02B-SRSS-TB | esp_board:JST_BM02B-SRSS-TB | J6 |
| 1 | ESPr® Developer S3 Type-C | esp_board:ESP32-S3 dev board | U4 |
| 1 | JST_VH_B2P | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J2 |
| 1 | LED YELLOW | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | LED Yellow | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | LOGO | esp_board:mach_schnell-small | G*** |
| 1 | MS50N06 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | SN74LVC2G241 | esp_board:SN74LV2G241DCUR | U3 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |

lipoyang/StackChanPwd
M5Stack-embedded super cute humanoid controller unit

Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation





introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…

It measures 27.7 × 63.5 mm and has 4 copper layers, 1.6 mm thick.
28 parts, built around the SN74LVC2G241DCU, B3B-EH-A, BM05B-SRSS-TB and BM02B-SRSS-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the snakebot-tohoku/esp_header_4_Layers repository on GitHub, at the commit this page was made from: the board is esp_header_4_layers.kicad_pcb and its schematic esp_header_4_layers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask snakebot-tohoku before reusing the design.