
RelayBoard
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

Version control for the Waterloop Electrical Team
Torchic is an open-source printed circuit board by lindamao-waterloop, from the lindamao-waterloop/waterloop_electrical repository on GitHub. It is a 2-layer board of 42.2 × 25.4 mm with 27 parts on 17 nets, routed with 188 tracks and 44 vias.
It is built around the ATMEGA16M1-AU, TJA1051T and ADT7311WTR. Its parts include 12 capacitors, 5 ICs, 2 connectors, 1 resistor and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP0, TP1, TP2, TP3, TP4, TP5 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C7, C9 |
| 2 | 0F | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12 |
| 2 | 100u | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3, C4 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ADT7311 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ATmega16M1-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x04_Male | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm | Y1 |
| 1 | ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | NCP1117-3.3V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | NCP1117-5V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team
/Laser_Stripe_Sensor.kicad_pcb.jpg?size=s&soon)
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team





claudiucherciu/CANtoUART
ATmega16M1 with 2CAN transceivers and UART breakout on a PC104 pcb.

brandon-martinez/jgb
The microcontroller present on this board, and the software which runs on it should eventually be integrated into each node which must communicate via the CAN bus.

It measures 42.2 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ATMEGA16M1-AU, TJA1051T and ADT7311WTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lindamao-waterloop/waterloop_electrical repository on GitHub, at the commit this page was made from: the board is Temperator_Sensor/Torchic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lindamao-waterloop before reusing the design.