

CANtoUART
ATmega16M1 with 2CAN transceivers and UART breakout on a PC104 pcb.
- Size
- 90.2 × 95.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 136
- Pads
- 190
- Tracks, vias
- 307, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Oct 2016
- Updated
- 13 Oct 2016
Overview
CANtoUART is an open-source printed circuit board by claudiucherciu, from the claudiucherciu/CANtoUART repository on GitHub. It is a 2-layer board of 90.2 × 95.9 mm with 16 parts on 136 nets, routed with 307 tracks and 26 vias.
It is built around the ATMEGA16M1-AU. Its parts include 5 resistors, 4 ICs, 2 capacitors, 1 diode and 1 connector. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCAN to UART converter
Overview
ATmega16M1 microcontroller, with 2 CAN transceivers and UART output. Based on the Librecube LC-2601 design.
##TODO:
Authors
- Claudiu Cherciu claudiucherciu@gmail.com
- Artur Scholz artur.scholz@cubesat.de
Acknowledgements
Supported by the ESOC Cybernetic Club.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 120 | Resistors_SMD:R_0603_HandSoldering | R5, R6 |
| 2 | ATA6561 | Power_Integrations:SO-8 | U5, U6 |
| 2 | CONN_02X26 | Pin_Headers:Pin_Header_Straight_2x26 | H1, H2 |
| 1 | 0 | Resistors_SMD:R_0603_HandSoldering | R7 |
| 1 | 1 uF | Capacitors_SMD:C_1812 | C1 |
| 1 | 10k | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | ADG787 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U4 |
| 1 | ATMEGA16M1-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | CONN_01X06 | Connectors_JST:JST_GH_BM06B-GHS-TBT_06x1.25mm_Straight | ISP1 |
| 1 | DNP | Resistors_SMD:R_0603_HandSoldering | R8 |
| 1 | Led_Small | LEDs:LED_0805 | D1 |
| 1 | x uF | Capacitors_SMD:C_1210_HandSoldering | C2 |
Similar boards
- 6 layers103.1 × 59.6 mm

- 4 layers169.3 × 153 mm

- 6 layers103.1 × 59.6 mm

- 2 layers100 × 100 mm

- 2 layers353.1 × 101.6 mm

ATMEGA16M1 panel
brandon-martinez/jgb
The microcontroller present on this board, and the software which runs on it should eventually be integrated into each node which must communicate via the CAN bus.
195 parts - 2 layers57.7 × 25.1 mm

- 2 layers38.1 × 25.4 mm

BrakeActuator
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team
29 parts2 - 2 layers140.5 × 30 mm

Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0
Questions
How big is the CANtoUART PCB?
It measures 90.2 × 95.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CANtoUART use?
16 parts, built around the ATMEGA16M1-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CANtoUART KiCad files?
From the claudiucherciu/CANtoUART repository on GitHub, at the commit this page was made from: the board is design/electrical/CANtoUART.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CANtoUART design in my own project?
Its repository states no licence, so its author keeps all rights: ask claudiucherciu before reusing the design.