

EMG-based subvocal microphone
- Size
- 148 × 38.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 36
- Pads
- 128
- Tracks, vias
- 220, 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2025
- Updated
- 14 Jun 2025
Overview
Svm is an open-source printed circuit board by lucia3e8, from the lucia3e8/emgsvm repository on GitHub. It is a 2-layer board of 148 × 38.5 mm with 47 parts on 36 nets, routed with 220 tracks and 4 vias.
It is built around the INA128U and TL431AIZT. Its parts include 22 resistors, 8 capacitors, 6 ICs, 5 switches and 3 connectors.
Main components
2INA128U
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+85℃ 1 10uV 130dB 200nV/℃ 2nA 30pA/℃ 4.5V~36V 4V/us 5nA 6mA 700uA 7us 8nV/√Hz@1kHz External resistor gain、Overvoltage protection Single-Ended SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersTL431AIZT
TO-92-2.54mm-40℃~+105℃ 100mA 2.495V~36V 2.5V~36V 600uA Adjustable Parallel ±1% TO-92-2.54mm Voltage Reference ROHSSTMicroelectronicsVoltage Reference
README
README.mdSubvocal Recognition Colllar
Eventually, a neck-worn sEMG + neck microphone for near-subvocal speech recognition.
Currently, some prototypes
Layout
.
├── adc # tests for a promising 8-channel ADC chip
├── afe # janky, INA128-based analog frontend
├── components # for KiCad
├── datasheets
├── piezo # preamp for a piezo mic
├── scripts # random nonsense
├── spice # analog circuit simulationParts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2, C3, C6, C7 |
| 4 | 160k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R5, R6, R10 |
| 4 | 20k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R4, R8, R9 |
| 4 | 2n | Capacitor_THT:C_Rect_L16.5mm_W4.7mm_P15.00mm_MKT | C1, C4, C5, C8 |
| 4 | 470 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R11, R12, R13, R18 |
| 3 | DIN42802 | lucia:EMSLIFE EE-B04 | S1, S3, S5 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 3 | TL431AIZT | lucia:TL431AIZT | IC1, IC2, IC3 |
| 2 | 0.01p | lucia:EMSLIFE EE-B04 | S2, S4 |
| 2 | 500 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R7 |
| 2 | 7.5k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R15, R20 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1, J2 |
| 2 | INA128 | lucia:INA128PA | U2, U3 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R19 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R22 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R16 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R17 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R14 |
| 1 | 5.6k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R21 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | TL074 | lucia:TL074CN | U1 |
More from lucia3e8/emgsvm
1- 2 layers70 × 44.6 mm

Similar boards
- 2 layers70.1 × 50 mm

- 2 layers182.9 × 83.8 mm

Schematic3
alberto-battistel/Teensy-EIS
Transform your teensy 3.6 (pjrc.com) into an instrument for electrochemical impedance spectroscopy.
37 parts6GPL-3.0 - 2 layers100 × 70 mm

- 2 layers85 × 55 mm

Final schematics
shreenandansonu/Electronic-Stethescope
EKOBIT is an electronics stethoscope, a AFE signal board for a digital stethoscope.
59 parts3MIT - 2 layers41.9 × 22 mm

Modular Filter 603 kicad
TZeng0698/Portable-EEG-with-Modular-Pre-Filtering-for-BCI-Applications
A Low-cost EEG BCI implementation with modular filtering card and ADS1298. The repo contains the PCB files and a guide to design your own(in progress).
42 parts3 - 2 layers69.5 × 25 mm

B3.1
Neurotechnology-Exploration-Team/Psylink-NXT
This is intended as a human input device (like a keyboard) that predicts your intention from muscle signals. Using a neural network, trained through a process where you press keys at the exact same time that you make…
56 parts2GPL-3.0 - 2 layers90 × 100 mm

Fonte corrente bipolar V01
Pinheirogustavo/PCB_projects
O gerador de sinais é baseado no AD9850. São gerados dois sinais senoidais e dois sinais quadrados, com banda de frequência entre 1 Hz e 40 MHz.
56 parts2 - 4 layers200 × 142.3 mm

FRED Electrical Scheme KiCAD
GiulianoAgostini04/FRED-Project
Real-time concentration monitoring system based on frontal-lobe EEG signals. Features a custom PCB designed with TinkerCAD and KiCad, OpenBCI Ganglion and Arduino UNO for signal acquisition, display, and frequency-band…
93 parts1MIT
Questions
How big is the Svm PCB?
It measures 148 × 38.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Svm use?
47 parts, built around the INA128U and TL431AIZT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Svm KiCad files?
From the lucia3e8/emgsvm repository on GitHub, at the commit this page was made from: the board is afe/svm.kicad_pcb and its schematic adc/adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Svm design in my own project?
Its repository states no licence, so its author keeps all rights: ask lucia3e8 before reusing the design.