Skip to the content
2 layers100 × 56.5 mmTipi, the printed circuit board in 3D

This TIPI board is for use with danwerner21 (https://github.com/danwerner21/TI99_22.git) TI99-22 project

Size
100 × 56.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
112
Pads
268
Tracks, vias
1,819, 169
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Apr 2024
Updated
18 Oct 2026

Overview

Tipi is an open-source printed circuit board by lucedoriente, from the lucedoriente/TI99-4A-internal-TIPI repository on GitHub. It is a 2-layer board of 100 × 56.5 mm with 32 parts on 112 nets, routed with 1,819 tracks and 169 vias.

It is built around the 74HCT245, 27C256-17/J and LM1117-3.3. Its parts include 11 capacitors, 6 resistors, 4 ICs, 1 diode and 1 transistor. It belongs with the FPGA and CPLD boards of this library.

Main components

3

README

README.md

This projct born to integrate the ElectricLab & Jedimatt42 TIPI board in the new TI99/4A version by Dan Werner. I like so much this project and adding TIPI features without external box or usin PEB seems to me a great idea. Maybe it's not but I like it.

License The original project was licensed under the Creative Commons - Attribution - ShareAlike 3.0 License

Attribution This board was derrived from works by, uses design elements from, or contains sofware writen by the following:

Matthew Splett - jedimatt42 (https://github.com/jedimatt42/tipi.git)

Inspired by the Dan Werner beautiful TI99-22 project:

Dan Werner (https://github.com/danwerner21/TI99_22.git)

Parts

32
QtyValueFootprintReferences
90.1ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4, C5, C6, C7, C8, C9, C10, C11
5TEST_1PConnector_Wire:SolderWirePad_1x01_SMD_1x2mmT1, T2, T3, T4, T5
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5, R6
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R3
110ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
122ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
127C256Package_DIP:DIP-28_W15.24mm_SocketU2
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
174HCT245Package_SO:SSOP-20_3.9x8.7mm_P0.635mmU3
1AVR-JTAG-10Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalJTAG1
1CONN_02X04Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalCRUBASE1
1LED_ALTLED_THT:LED_D3.0mmD1
1LM1117-3.3Package_TO_SOT_SMD:SOT-223U4
1Q_NPN_BCEPackage_TO_SOT_SMD:SOT-23Q1
1RPI_CONN_02X05Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalRPi1
1TI32kSideportConnector_PinSocket_2.54mm:PinSocket_2x22_P2.54mm_VerticalJ1
1XC95144XL-TQ100Package_QFP:TQFP-100_14x14mm_P0.5mmU1

Similar boards

  • 2 layers237.7 × 146.1 mmTipi peb, the printed circuit board in 3D

    Tipi peb

    jedimatt42/tipi

    TI-99/4A to Raspberry PI messaging through console sideport

    51 parts77
  • 4 layers318.4 × 124.5 mmN2360, the printed circuit board in 3D

    N2360

    jasonsbeer/Amiga-N2630

    A re-imagining of the Amiga A2630 processor card.

    248 parts69
  • 2 layers218 × 125 mmEVA1 v2, the printed circuit board in 3D

    EVA1 v2

    roberto314/EVA-1_Reproduction

    Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer

    160 parts
  • 2 layers129.2 × 50 mmRIPPLE, the printed circuit board in 3D

    RIPPLE

    LIV2/RIPPLE-IDE

    Zorro 2 IDE Interface for Amiga 2000/3000/4000

    61 parts41GPL-2.0
  • 4 layers184.9 × 243.8 mmProject NuXT, the printed circuit board in 3D

    Project NuXT

    monotech/NuXT

    MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial

    223 parts121GPL-3.0
  • 2 layers104.1 × 87.6 mmIsa svga, the printed circuit board in 3D

    Isa svga

    skiselev/isa-super-vga

    Trident TVGA9000i based Super VGA board

    62 parts81
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56

Questions

How big is the Tipi PCB?

It measures 100 × 56.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tipi use?

32 parts, built around the 74HCT245, 27C256-17/J and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tipi KiCad files?

From the lucedoriente/TI99-4A-internal-TIPI repository on GitHub, at the commit this page was made from: the board is tipi.kicad_pcb and its schematic tipi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tipi design in my own project?

Its repository states no licence, so its author keeps all rights: ask lucedoriente before reusing the design.