

Vna rf
Under development open hardware microwave vector network analyzer
- Size
- 78 × 49 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 527
- Nets
- 89
- Pads
- 920
- Tracks, vias
- 1,060, 171
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Apr 2016
- Updated
- 31 Dec 2023
Overview
Vna rf is an open-source printed circuit board by loxodes, from the loxodes/vna repository on GitHub. It is a 4-layer board of 78 × 49 mm with 527 parts on 89 nets, routed with 1,060 tracks and 171 vias.
It is built around the PE42521C-Z, LMX2594RHA and MASW-008322-TR1000, with the 1810LP07A200T, 3550LP14A300T and LTC2054CS5 among its other parts. Its parts include 51 capacitors, 44 resistors, 15 ICs, 8 diodes and 5 inductors. It belongs with the radio and wireless and sensors and measurement boards of this library.
Main components
8PE42521C-Z
QFN-16(3x3)-40℃~+85℃ 1.85dB 17dB 2.3V~5.5V 9kHz~13GHz SPDT QFN-16(3x3) RF Switches ROHSpSemiRF SwitchesLMX2594RHA
QFN4015GHz Wideband PLLatinum RF Synthesizer with Phase Synchronization and JESD204B SupportTexas InstrumentsUncategorisedMASW-008322-TR1000
PQFN-24(4x4)-40℃~+85℃ 0Hz~20GHz 1.9dB 30dBm 40dB SPDT PQFN-24(4x4) RF Switches ROHSMACOMRF Switches1810LP07A200T
SMD-4P,0.5x1mm0.5dB Low Pass SMD-4P,0.5x1mm RF Filters ROHSJohanson DielectricsRF Filters3550LP14A300T
SMD-6P,0.8x1.6mm0.65dB Low Pass SMD-6P,0.8x1.6mm RF Filters ROHSJohanson DielectricsRF FiltersLTC2054CS5
TSOT-23-50.5V/us 0℃~+70℃ 1 140uA 500kHz Zero drift / auto-zero、Reverse-phase input protection TSOT-23-5 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsNC7WZU04P6X
SC-70-6(SOT-363)-40℃~+85℃ 1.53V~2.295V、2.4V~4.4V 1.8V~5.5V 1uA 2 270mV~405mV、600mV~1.1V 290mV~550mV 3.8V~4.24V 5.6ns@5V,50pF 7WZU 8mA 8mA Push-pull StandardCMOS SC-70-6(SOT-363) Inverters ROHSonsemiInvertersBLM15GG471SN1
0402-55℃~+125℃ 1 1.3Ω 200mA 470Ω@100MHz ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
README
README.mdOpen Hardware Vector Network Analyzer
I'm developing a proof of concept two port microwave vector network analyzer. The project is under developent. Ongoing documentation and logs are located on a hackaday.io project page.
Usage
This project is still under development, y'all probably don't want to try reproducing it yet. Two port measurements to 14 GHz work, a redesign for operation out to 36 GHz is in progress.
Hardware Design
See breakouts and hardware for various modules developed for the network analyzer.

Software Design
See the software directory for scraps of software written for testing VNA modules.
License
Unless otherwise noted, all work is under a MIT license.
Contact
Feel free to contact me at arcticmicrowave@gmail.com or loxodes on irc.freenode.net
Parts
527| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10 pF | Capacitors_SMD:C_0402 | C221, C222, C223, C224, C230, C235, C236, C304, C305, C306, C307, C309, C311 |
| 11 | 100 nF | Capacitors_SMD:C_0402 | C201, C215, C225, C226, C227, C228, C233, C237, C301, C302, C303 |
| 11 | 1k | Resistors_SMD:R_0402 | R214, R215, R216, R217, R218, R225, R226, R228, R229, R301, R302 |
| 7 | 1 uF | Capacitors_SMD:C_0402 | C202, C204, C205, C206, C207, C209, C218 |
| 7 | 10 uF | Capacitors_SMD:C_0603 | C203, C208, C210, C216, C217, C401, C403 |
| 6 | 22 | Resistors_SMD:R_0402 | R201, R202, R205, R206, R207, R209 |
| 6 | 51 | Resistors_SMD:R_0402 | R210, R211, R212, R213, R307, R308 |
| 6 | LED_Small | LEDs:LED_0603 | D201, D202, D203, D401, D402, D403 |
| 6 | R_Small | Resistors_SMD:R_0402 | R305, R306, R401, R402, R403, R404 |
| 6 | TBD | Resistors_SMD:R_0402 | R219, R220, R223, R224, R231, R232 |
| 4 | MOUNTING_HOLE | Mounting_Holes:MountingHole_2-7mm | H401, H402, H403, H404 |
| 3 | CONN_SMA | vna_footprints:732511150_sma_thin | U403, U404, U405 |
| 3 | DNP | Capacitors_SMD:C_0402 | C213, C229, C231 |
| 2 | 1 uF | Capacitors_SMD:C_0805 | C308, C310 |
| 2 | 10 nF | Capacitors_SMD:C_0402 | C219, C220 |
| 2 | 100 | Resistors_SMD:R_0402 | R303, R304 |
| 2 | 100k | Resistors_SMD:R_0402 | R222, R227 |
| 2 | 220 nF | Capacitors_SMD:C_0402 | C232, C234 |
| 2 | 68k | Resistors_SMD:R_0402 | R221, R230 |
| 2 | CONN_SMA_2GND | vna_footprints:SMA_901-10512_30MIL_OSHFR408_CPW_LAUNCH | U401, U402 |
| 2 | L_Small | vna_footprints:ATC506WLS | L301, L302 |
| 2 | PE42521 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm | U302, U304 |
| 2 | RF_Shield_Two_Pieces | Shielding_Cabinets:Laird_Technologies_BMI-S-202-F_16.50x16.50mm | J301, J302 |
| 1 | 100 uF | Capacitors_SMD:c_elec_10x10 | C402 |
| 1 | 18 | Resistors_SMD:R_0402 | R204 |
| 1 | 1800 pF | Capacitors_SMD:C_0402 | C214 |
| 1 | 1810LP07A200 | vna_footprints:1810LP07A200 | FL202 |
| 1 | 22 H | Resistors_SMD:R_0402 | L202 |
| 1 | 22 nH | Resistors_SMD:R_0402 | L201 |
| 1 | 3550LP14A300 | vna_footprints:3550LP14A300 | FL203 |
| 1 | 390 pF | Capacitors_SMD:C_0402 | C211 |
| 1 | 5.1V | Diodes_SMD:SOD-323 | D301 |
| 1 | 5515LP15A730 | vna_footprints:5515LP15A730 | FL201 |
| 1 | 68 | Resistors_SMD:R_0402 | R208 |
| 1 | 68 nF | Capacitors_SMD:C_0402 | C212 |
| 1 | ADRF5040 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U203 |
| 1 | BLM15GG471 | Resistors_SMD:R_0402 | L203 |
| 1 | CONN_02X10 | Connect:IDC_Header_Straight_20pins | J401 |
| 1 | CONN_SMA_2GND | vna_footprints:734120110_ufl_umc | U406 |
| 1 | JMP | Resistors_SMD:R_0402 | R203 |
| 1 | LED | LEDs:LED_0603 | D302 |
| 1 | LMX2594 | Housings_DFN_QFN:QFN-40-1EP_6x6mm_Pitch0.5mm | U201 |
| 1 | LOGO | vna_footprints:cat | G*** |
| 1 | LTC2054CS5 | TO_SOT_Packages_SMD:SOT-23-5 | U204 |
| 1 | LTC2630 | TO_SOT_Packages_SMD:SC-70-6 | U202 |
| 1 | MAAM-011100 | vna_footprints:TDFN6 | U205 |
| 1 | MASW-008322-TR1000 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U303 |
| 1 | NC7WZU04 | TO_SOT_Packages_SMD:SC-70-6 | U301 |
| 1 | RF_Shield_Two_Pieces | Shielding_Cabinets:Laird_Technologies_BMI-S-205-F_38.10x25.40mm | J402 |
The 135 most common of 527 parts.
More from loxodes/vna
12- 4 layers66.5 × 93.5 mm

- 4 layers78.5 × 55.5 mm

Vna r1 demod
loxodes/vna
Under development open hardware microwave vector network analyzer
588 parts205 - 4 layers105 × 140 mm

- 4 layers78 × 56 mm

Vna r1 synth
loxodes/vna
Under development open hardware microwave vector network analyzer
485 parts205 - 6 layers

Vna mm synth
loxodes/vna
Under development open hardware microwave vector network analyzer
435 parts205 - 4 layers43.2 × 35.6 mm

Doubler switch
loxodes/vna
Under development open hardware microwave vector network analyzer
363 parts205 - 4 layers97.1 × 32.8 mm

Frequency synth
loxodes/vna
Under development open hardware microwave vector network analyzer
278 parts205 - 4 layers29 × 36 mm

Adrf5020 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
258 parts205 - 4 layers31.2 × 44 mm

Sot89 amp test
loxodes/vna
Under development open hardware microwave vector network analyzer
251 parts205 - 4 layers115.5 × 66 mm

- 4 layers31.3 × 23.5 mm

Pe42520 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
217 parts205 - 2 layers

Bias controller
loxodes/vna
Under development open hardware microwave vector network analyzer
203 parts205
Similar boards
- 4 layers129.5 × 52.3 mm

- 2 layers40.5 × 114.2 mm

Analog moist sensor panel
Miceuz/soil-moisture-sensor-analog
Analog soil moisture sensor
60 parts16Apache-2.0 - 4 layers63.4 × 66.3 mm

- 6 layers83.3 × 61.3 mm

- 4 layers73.9 × 85.7 mm

- 4 layers52 × 57 mm

- 4 layers88.9 × 35.6 mm

Transmitter
PeraZver/Microwave-Transmitter
30 - 6000 MHz 10 dBm Transmitter based on MAX2871 synthesizer. Controlled by Teensy 3.2.
144 parts14GPL-3.0 - 4 layers144.8 × 99.9 mm

Questions
How big is the Vna rf PCB?
It measures 78 × 49 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vna rf use?
527 parts, built around the PE42521C-Z, LMX2594RHA, MASW-008322-TR1000 and 1810LP07A200T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vna rf KiCad files?
From the loxodes/vna repository on GitHub, at the commit this page was made from: the board is hardware/archive/vna_r0/vna_rf/vna_rf.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vna rf design in my own project?
Its repository states no licence, so its author keeps all rights: ask loxodes before reusing the design.