
LMX2594RHA
Texas Instruments
15GHz Wideband PLLatinum RF Synthesizer with Phase Synchronization and JESD204B Support
- Part id
- ti/LMX2594RHA
- Category
- Uncategorised
- Package
- QFN40
- Pins
- 41
- Used on
- 4 open-source boards
Overview
The LMX2594RHA is an uncategorised made by Texas Instruments in a QFN40 package with 41 pins. 15GHz Wideband PLLatinum RF Synthesizer with Phase Synchronization and JESD204B Support.
PCBKit's library has its KiCad symbol (Analog & Interface:LMX2594, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P600X600X100-41N-S460, from CERN's library), ready for a KiCad board. 4 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
41| Pin | Name | Type |
|---|---|---|
| 1 | CE | Input |
| 2 | GND | Power in |
| 3 | VBIASVCO | Passive |
| 4 | GND | Power in |
| 5 | SYNC | Input |
| 6 | GND | Power in |
| 7 | VCCDIG | Power in |
| 8 | OSCINP | Input |
| 9 | OSCINM | Input |
| 10 | VREGIN | Input |
| 11 | VCCCP | Power in |
| 12 | CPOUT | Passive |
| 13 | GND | Power in |
| 14 | GND | Power in |
| 15 | VCCMASH | Power in |
| 16 | SCK | Input |
| 17 | SDI | Input |
| 18 | RFOUTBM | Output |
| 19 | RFOUTBP | Output |
| 20 | MUXOUT | Output |
| 21 | VCCBUF | Power in |
| 22 | RFOUTAM | Output |
| 23 | RFOUTAP | Output |
| 24 | CSB | Input |
| 25 | GND | Power in |
| 26 | VCCVCO2 | Power in |
| 27 | VBIASVCO2 | Passive |
| 28 | SYSREFREQ | Input |
| 29 | VREFVCO2 | Passive |
| 30 | RAMPCLK | Input |
| 31 | GND | Power in |
| 32 | RAMPDIR | Input |
| 33 | VBIASVARAC | Passive |
| 34 | GND | Power in |
| 35 | VTUNE | Passive |
| 36 | VREFVCO | Passive |
| 37 | VCCVCO | Power in |
| 38 | VREGVCO | Passive |
| 39 | GND | Power in |
| 40 | GND | Power in |
| 41 | GND | Power in |
Open-source boards using it
4- 4 layers66.5 × 93.5 mm

- 4 layers129.5 × 52.3 mm

- 4 layers78 × 56 mm

Vna r1 synth
loxodes/vna
Under development open hardware microwave vector network analyzer
485 parts205 - 4 layers78 × 49 mm

Parts like it
5CC2540F256RHA
QFN402.4GHz Bluetooth Low Energy System-on-Chip Solution with 256 KB of Flash MemoryTexas InstrumentsUncategorisedDAC7716SRHA
QFN40Quad, 12-Bit, High-Accuracy, ±16V Output, Serial Input Digital-to-Analog ConverterTexas InstrumentsUncategorisedLMX1204RHA
QFN4012.8GHz Low-Noise, High-Frequency JESD Buffer/Multiplier/DividerTexas InstrumentsUncategorisedLMX2572RHA
QFN40Low power wideband RF synthesizer with phase synchronization and JESD204B supportTexas InstrumentsUncategorisedLMX2595RHA
QFN4010MHz - 19GHz Wideband RF Synthesizer with Phase Synchronization and JESD204B SupportTexas InstrumentsUncategorised
Questions
Is there a KiCad symbol and footprint for the LMX2594RHA?
Yes. The symbol is Analog & Interface:LMX2594 and the footprint ICs And Semiconductors SMD:QFN50P600X600X100-41N-S460, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMX2594RHA?
QFN40, with 41 pins. Its footprint is drawn on this page.
What can replace the LMX2594RHA?
Parts like it in the library: the CC2540F256RHA by Texas Instruments, the DAC7716SRHA by Texas Instruments, the LMX1204RHA by Texas Instruments and the LMX2572RHA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LMX2594RHA?
4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.