Skip to the content
2 layers24 × 40 mmGps, the printed circuit board in 3D

This project is, first and foremost, a custom devboard made for macondo. It has a esp32-c3 chip on it. A main tenant of its design is to be as power efficient as possible, because of its secondary purpose as a GNSS…

Size
24 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
31
Pads
136
Tracks, vias
240, 29
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Jun 2026
Updated
17 Aug 2026

Overview

Gps is an open-source printed circuit board by louis-bourgault, from the louis-bourgault/gps repository on GitHub. It is a 2-layer board of 24 × 40 mm with 26 parts on 31 nets, routed with 240 tracks and 29 vias.

It is built around the ESP32-C3-WROOM-02-H4, TP4057 and TPS78330DDCR, with the SS14 among its other parts. Its parts include 6 resistors, 5 capacitors, 5 connectors, 4 diodes and 3 ICs. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

custom devboard/GNSS tracker

This project is, first and foremost, a custom devboard made for macondo. It has a esp32-c3 chip on it. A main tenant of its design is to be as power efficient as possible, because of its secondary purpose as a GNSS board. GNSS is not the primary use - the primary use is to have a functional, simple, and useful devboard for my own purpose. However, it is a likely extention of the project. The idea is that I've put a bunch of pins on the PCB in the right place to connect to a GNSS module, specifically the ATGM336 family, and designed something power efficient enough to run intermittent tracking for up to, ideally, 10 days or so while using a 1000mAh battery. Macondo reviewers: if i end up doing the GNSS thing, i will buy the chip myself (it's cheap) later on

Programming

The device uses the esp32-c3-mini-n4, which is a module which contains 4mb of inbuilt flash storage. You can program it through the ESP-IDF in C or C#, or through the Arduino IDE.

Pinout

Pinout The GNSS pins are the top 5, although of course they can be used for other things, GNSS is just the reason they are arranged in this way.

Production files

Prod files can be found at /hardware/jlcpcb/production-files.

jlcpcb cart

Parts

26
QtyValueFootprintReferences
2100nfCapacitor_SMD:C_0402_1005MetricC4, C5
210kResistor_SMD:R_0402_1005MetricR4, R8
21uCapacitor_SMD:C_0402_1005MetricC1, C2
25.1kResistor_SMD:R_0402_1005MetricR2, R3
2Conn_01x01TestPoint:TestPoint_Pad_2.5x2.5mmJ3, J4
2LEDLED_SMD:LED_0603_1608MetricD4, D5
2SS14Diode_SMD:D_SOD-123D2, D3
2SW_SPDTButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW1, SW4
110ufCapacitor_SMD:C_0402_1005MetricC3
11kResistor_SMD:R_0603_1608MetricR6
12kResistor_SMD:R_0402_1005MetricR1
1BOOTButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW5
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U5
1TP4057Package_TO_SOT_SMD:SOT-23-6U2
1TPS78330DDCRCustom:DDC5_TEXU3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers29.8 × 49.8 mmGummySlime, the printed circuit board in 3D

    GummySlime

    gumorr/GummySlime

    Cheesecake compatible SlimeVR pcbs

    28 parts1
  • 2 layers74 × 83.8 mmPCB Board, the printed circuit board in 3D

    PCB Board

    RunningJoke/reactionButton

    ReactPod: ESP32-C3 reaction buzzers – firmware, Config App (PWA), tools, hardware

    70 parts
  • 2 layers18 × 14.4 mmBauble pcb, the printed circuit board in 3D

    Bauble pcb

    Spritetm/esp32c3-doom-bauble

    Christmas tree bauble with an ESP32C3 running Doom

    19 parts89
  • 4 layers51 × 33 mmSmolExG, the printed circuit board in 3D

    SmolExG

    matthewlai/SmolExG

    63 parts1
  • 2 layersShop guard, the printed circuit board in 3D

    Shop guard

    Aust1nke/Security_shop_guard

    I built this pcb using esp32, and lidar sensor to monitor and alert shop owner of intruders

    29 parts
  • 2 layers45 × 42.5 mmWhaap, the printed circuit board in 3D

    Whaap

    bardiasayyar/Custom-PCB-Wearable-Step-Fall-Tracker

    Designing a custom wristband PCB in KiCad integrating an ESP32-C3 microcontroller, LSM6DS3 IMU (I2C), and LiPo battery/charging circuitry for real-time step counting, fall detection, and battery monitoring.

    31 parts
  • 4 layers95 × 55 mmGalvanik, the printed circuit board in 3D

    Galvanik

    viridivn/galvanik

    OSHW galvanic hair electrolysis device

    103 parts2
  • 4 layers45 × 61 mmRobosapien, the printed circuit board in 3D

    Robosapien

    yigitabi5444/Robosapien

    AI powered Walking Talking Robot Toy

    93 partsGPL-3.0

Questions

How big is the Gps PCB?

It measures 24 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gps use?

26 parts, built around the ESP32-C3-WROOM-02-H4, TP4057, TPS78330DDCR and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gps KiCad files?

From the louis-bourgault/gps repository on GitHub, at the commit this page was made from: the board is hardware/gps.kicad_pcb and its schematic hardware/gps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gps design in my own project?

Its repository states no licence, so its author keeps all rights: ask louis-bourgault before reusing the design.