

Robosapien
AI powered Walking Talking Robot Toy
- Size
- 45 × 61 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 93
- Nets
- 106
- Pads
- 390
- Tracks, vias
- 625, 172
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Feb 2023
- Updated
- 26 Dec 2023
Overview
Robosapien is an open-source printed circuit board by yigitabi5444, from the yigitabi5444/Robosapien repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 45 × 61 mm with 93 parts on 106 nets, routed with 625 tracks and 172 vias.
It is built around the CP2102-GMR, PAM8303DBSC and TPS63020DSJR, with the TP4057, SMF05CT1G and B2B-PH-K-S(LF)(SN) among its other parts. Its parts include 34 capacitors, 19 resistors, 13 diodes, 6 ICs and 6 inductors. It belongs with the ESP32 boards of this library.
Main components
8CP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersPAM8303DBSC
MSOP-8-40℃~+85℃ -63dB 0.28% 1 Pair Differential Inputs 1-Channel 2.8V~5.5V 3Wx1@4Ω 7.5mA 90% Class D Enable/shutdown function、Filterless architecture MSOP-8 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersTPS63020DSJR
VSON-14-EP(3x4)-40℃~+85℃@(TA) 1 1.2V~5.5V 1.8V~5.5V 2.4MHz 3A 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-14-EP(3x4) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V Charging IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSTECH PUBLICBattery ManagementSMF05CT1G
SOT-363-55℃~+125℃ 100W 100nA 10V 1A 30pF 5 5V 6V IEC 61000-4-2、IEC 61000-4-4 TVS SOT-363 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)B2B-PH-K-S(LF)(SN)
插件,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 4.5mm 5.9mm 6mm Brass K Pin PA66 PH Through Hole Tin UL94V-0 White 插件,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes10118193-0001LF
SMD-55℃~+85℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10kΩ 0402 50V | easyeda2kicad:R0402 | R1, R3, R5, R10, R11, R12, R13, R16, R17, R18, R19 |
| 8 | 10uF | easyeda2kicad:C0402 | C2, C4, C10, C11, C12, C14, C15, C22 |
| 7 | SMF05CT1G | easyeda2kicad:SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | D1, D4, D5, D7, D8, D9, D10 |
| 6 | 100nF | easyeda2kicad:C0402_NEW | C1, C16, C24, C25, C26, C37 |
| 6 | 9P 2.54 Male Header | easyeda2kicad:HDR-TH_9P-P2.54-V-M | H1, H2, H4, H5, H6, H7 |
| 5 | 100uF | easyeda2kicad:CAP-SMD_L3.5-W2.8 | C23, C33, C34, C35, C36 |
| 4 | 120Ω 3A | easyeda2kicad:L1206 | L1, L5, L6, L8 |
| 4 | 22uF | easyeda2kicad:C0603 | C13, C21, C29, C32 |
| 3 | 16V 100nF X7R ±10% 0402 | easyeda2kicad:C0402_NEW | C3, C28, C30 |
| 3 | 25V 1uF X5R ±10% 0402 | easyeda2kicad:C0402 | C8, C19, C31 |
| 3 | B2B-PH-K-S(LF)(SN) | easyeda2kicad:CONN-TH_B2B-PH-K-S | CN1, CN2, CN3 |
| 2 | 100uF 6.3V Tantal 3528 | easyeda2kicad:CAP-SMD_L3.5-W2.8 | C17, C27 |
| 2 | 150kΩ 0402 50V | easyeda2kicad:R0402 | R14, R15 |
| 2 | 15nF | easyeda2kicad:C0603 | C18, C20 |
| 2 | 4.7kΩ 0402 50V | easyeda2kicad:R0402 | R20, R25 |
| 2 | Header 2.54 5P Female | easyeda2kicad:HDR-TH_5P-P2.54-V-F | H8, H9 |
| 2 | SS14 | easyeda2kicad:SMA_L4.2-W2.6-LS5.3-RD | D11, D12 |
| 2 | SS8050_C2150 | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q2 |
| 2 | White Led 0603 | easyeda2kicad:LED0603-R-RD_WHITE | LED3, LED4 |
| 1 | 100kΩ 0402 50V | easyeda2kicad:R0402 | R2 |
| 1 | 10118193-0001LF | easyeda2kicad:MICRO-USB-SMD_10118193-0001LF | USB1 |
| 1 | 18kΩ 0402 50V | easyeda2kicad:R0402 | R8 |
| 1 | 1kΩ 0402 50V | easyeda2kicad:R0402 | R7 |
| 1 | 1uF | easyeda2kicad:C0402 | C9 |
| 1 | 2.8A 1uH ±20% 45mΩ | easyeda2kicad:IND-SMD_L2.5-W2.0 | L4 |
| 1 | 2kΩ 0402 50V | easyeda2kicad:R0402 | R4 |
| 1 | 600Ω 200mA | easyeda2kicad:L0603 | L3 |
| 1 | 6P 2.54 Male Header | easyeda2kicad:HDR-TH_6P-P2.54-V-M-1 | H3 |
| 1 | CP2102-GMR | easyeda2kicad:WQFN-28_L5.0-W5.0-P0.50-BL-EP3.2 | U2 |
| 1 | ESP32-WROOM-32D(8MB) | easyeda2kicad:WIFIM-SMD_39P-L25.5-W18.0-P1.27 | U5 |
| 1 | Green LED 0603 | easyeda2kicad:LED0603-R-RD | LED2 |
| 1 | PAM8303DBSC | easyeda2kicad:MSOP-8_L3.0-W3.0-P0.65-LS5.0-BL | U6 |
| 1 | PCA9685PW,118 | easyeda2kicad:TSSOP-28_L9.7-W4.4-P0.65-LS6.4-TL | U7 |
| 1 | Red LED 0603 | easyeda2kicad:LED0603-R-RD | LED1 |
| 1 | TP4057 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U1 |
| 1 | TPS63020DSJR | easyeda2kicad:VSON-14_L4.0-W3.0-P0.50-BL-EP_TI_DSJ | U4 |
Similar boards
- 4 layers61 × 88.9 mm

- 2 layers38.7 × 50.6 mm

- 2 layers66.3 × 70.3 mm

Bldc driver
acanyulaf/24V-10A-BLDC-Driver
This is a technical assignment problem given by Kuartis. The aim is to design a 24V/10A BLDC controller. There will be also an I2C or SPI interface for control inputs.
66 parts - 4 layers99 × 80 mm

Handheld
lewipewi/esp-32-gaming-console
A custom PCB handheld built to run Game Boy games, inspired by the original DMG. Designed from scratch in KiCad — schematic, layout, BOM and firmware.
61 parts - 2 layers66.8 × 34 mm

- 2 layers70 × 65 mm

Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers46.5 × 78.5 mm

Shaun proj
SFBdragon/eee3088f-project
Collaborative repo for the UCT EEE3088F Project of team 69.
99 partsCERN-OHL-P-2.0 - 2 layers77.5 × 48.5 mm

Questions
How big is the Robosapien PCB?
It measures 45 × 61 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Robosapien use?
93 parts, built around the CP2102-GMR, PAM8303DBSC, TPS63020DSJR and TP4057. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robosapien KiCad files?
From the yigitabi5444/Robosapien repository on GitHub, at the commit this page was made from: the board is Hardware/Robosapien.kicad_pcb and its schematic Hardware/3V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robosapien design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).