

Matrixdisplay
PCB for the MicroMatrix project
- Size
- 73 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 63
- Pads
- 267
- Tracks, vias
- 297, 76
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Nov 2025
- Updated
- 8 Dec 2025
Overview
Matrixdisplay is an open-source printed circuit board by ljcmps01, from the ljcmps01/MicroMatrix-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 73 × 31 mm with 93 parts on 63 nets, routed with 297 tracks and 76 vias.
It is built around the CR2032. Its parts include 66 diodes, 11 resistors, 6 connectors, 3 capacitors and 3 switches. It belongs with the STM32 boards of this library.
Main components
1README
README.mdMicroMatrix-PCB
PCB for the MicroMatrix project
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +50 |
| 8 | 220 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | MountingHole | MountingHole:MountingHole_2mm | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | BT1 | SamacSys_Parts:TS24CA | SW1 |
| 1 | BT2 | SamacSys_Parts:TS24CA | SW2 |
| 1 | COL | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | COLUMNAS | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | CR2032 | Battery:BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | BT1 |
| 1 | FILAS | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | FILAS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | P_ON | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | STM32F051K8Ux | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the Matrixdisplay PCB?
It measures 73 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Matrixdisplay use?
93 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Matrixdisplay KiCad files?
From the ljcmps01/MicroMatrix-PCB repository on GitHub, at the commit this page was made from: the board is matrixdisplay/matrixdisplay.kicad_pcb and its schematic matrixdisplay/matrixdisplay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Matrixdisplay design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).