Skip to the content
4 layers100 × 72 mmEsp32-serial deployer pcb, the printed circuit board in 3D

Esp32-serial deployer pcb

lizuyi-6/Networksafe

🛡️ AetherGuard - 智能服务器安全防御平台 | AI + 多Agent协作 + 硬件监控

Size
100 × 72 mm
Copper layers
4
Thickness
1.6 mm
Parts
51
Nets
37
Pads
251
Tracks, vias
9, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Jan 2026
Updated
23 Oct 2026

Overview

Esp32-serial deployer pcb is an open-source printed circuit board by lizuyi-6, from the lizuyi-6/Networksafe repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 72 mm with 51 parts on 37 nets, routed with 9 tracks and 2 vias.

It is built around the ESP32-WROOM-32E, AP2112K-3.3 and MMBT3904, with the B5819W among its other parts. Its parts include 10 resistors, 9 capacitors, 6 ICs, 5 switches and 4 diodes. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

4

README

hardware/kicad/aetherguard-control-board-v1/README.md

AetherGuard Control Board v1 KiCad Project

This directory contains the KiCad 9 baseline for the AetherGuard single-host physical authorization board.

Scope

  • KiCad 9 native project only.
  • Full schematic split into four child sheets:
    • sheets/power-input.kicad_sch
    • sheets/mcu-usb-secure.kicad_sch
    • sheets/ui-panel.kicad_sch
    • sheets/isolated-io.kicad_sch
  • PCB baseline:
    • 90 mm x 60 mm
    • 4-layer
    • board outline
    • mounting holes
    • antenna keepout
    • isolation boundary
    • first-pass key component placement
    • current release export package under release/v1-proto/

Project Files

  • aetherguard-control-board-v1.kicad_pro
  • aetherguard-control-board-v1.kicad_sch
  • aetherguard-control-board-v1-flat.kicad_sch
  • aetherguard-control-board-v1.kicad_pcb
  • aetherguard-control-board-v1.kicad_sym
  • aetherguard-control-board-v1.pretty/
  • fp-lib-table
  • sym-lib-table

Design Notes

  • This EDA baseline consumes spare GPIO21 for externalPowerPresent sensing. The repo-level pin-map.md documents the fixed user-facing assignments and does not yet call out this auxiliary ADC input.
  • GPIO10 is used as an ATECC wake-assist control by pulling the shared I2C data line low through a dedicated transistor, rather than by a separate secure-element pin.
  • The interlock output is fail-closed in hardware by sourcing the output optocoupler LED from 5V_BUCK. If external DC is absent and the board is running from USB only, the isolated output cannot energize.
  • normalize_child_sheets.py is the repo-local repair tool for KiCad 9 child-sheet symbol metadata. It keeps placed symbol pin instances, nested cached-symbol names, and power-sheet fixups stable across reruns.
  • Child sheets are intentionally normalized to rely on the project symbol libraries instead of committing unstable embedded lib_symbols caches. Standalone child-sheet CLI load/export works again after that change.
  • generate_release_bom.py generates a grouped prototype BOM directly from the four child sheets.
  • generate_flat_release_schematic.py builds aetherguard-control-board-v1-flat.kicad_sch as a flattened review/export view. Treat it as a convenience view rather than the primary schematic source.
  • export_proto_release.py exports the current board state to release/v1-proto/ with Gerber, drill, pick-and-place, and assembly PDF outputs.
  • The current PCB file still represents a placement baseline rather than a fabrication-ready routed board. Current board metrics are 22 footprints / 0 tracks / 1 net / 0 zones.

Local Footprints

The project-local footprint library only contains the non-trivial parts that should stay pinned inside the repo:

  • AetherGuard_ESP32-S3-WROOM-1
  • AetherGuard_USB4110_GFA
  • AetherGuard_OLED_096_I2C_Module_1x4
  • AetherGuard_BUZZER_SMD_9x9
  • AetherGuard_SW_SPST_4P_4.2x3.2mm
  • AetherGuard_LED_RGB_CC_PLCC4

Validation

This machine already has KiCad 9.0.7 CLI installed at:

powershell
C:\Program Files\KiCad\9.0\bin\kicad-cli.exe

Use a temporary output directory so ERC/DRC reports do not get written back into the repo:

powershell
$cli = 'C:\Program Files\KiCad\9.0\bin\kicad-cli.exe'
$tmp = Join-Path $env:TEMP 'ag-kicad-test'
New-Item -ItemType Directory -Force -Path $tmp | Out-Null

& $cli sch export netlist hardware/kicad/aetherguard-control-board-v1/aetherguard-control-board-v1.kicad_sch `
  --output (Join-Path $tmp 'aetherguard-control-board-v1.net')

& $cli sch erc hardware/kicad/aetherguard-control-board-v1/aetherguard-control-board-v1.kicad_sch `
  --output (Join-Path $tmp 'erc.rpt')

& $cli pcb drc hardware/kicad/aetherguard-control-board-v1/aetherguard-control-board-v1.kicad_pcb `
  --output (Join-Path $tmp 'drc.rpt')

Release Export

Generate the current prototype release package in-place:

powershell
python hardware/kicad/aetherguard-control-board-v1/generate_release_bom.py
python hardware/kicad/aetherguard-control-board-v1/export_proto_release.py

Outputs land under:

  • hardware/kicad/aetherguard-control-board-v1/release/v1-proto/bom-proto.csv
  • hardware/kicad/aetherguard-control-board-v1/release/v1-proto/pick-and-place.csv
  • hardware/kicad/aetherguard-control-board-v1/release/v1-proto/gerbers/
  • hardware/kicad/aetherguard-control-board-v1/release/v1-proto/drill/
  • hardware/kicad/aetherguard-control-board-v1/release/v1-proto/assembly/

Current Limits

  • Root hierarchical CLI export is still unstable under KiCad 9.0.7; the reliable automated BOM path is the child-sheet parser in generate_release_bom.py.
  • The exported release package reflects the current board file exactly. It is useful for review and manufacturing-package plumbing, but it is not yet a truthful "ready to order" PCB release because the board is still unrouted and under-populated.

Non-Goals For This Baseline

  • No routed USB pair yet
  • No assembly variants
  • No .kicad_prl, .kicad-cli, scratch, or report artifacts committed

Parts

51
QtyValueFootprintReferences
30.1uCapacitor_SMD:C_0603_1608MetricC4, C6, C8
310uCapacitor_SMD:C_0603_1608MetricC1, C2, C9
3330Resistor_SMD:R_0603_1608MetricR13, R14, R15
3MMBT3904Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
210kResistor_SMD:R_0603_1608MetricR3, R4
21kResistor_SMD:R_0603_1608MetricR16, R18
24.7uCapacitor_SMD:C_0603_1608MetricC5, C7
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2B5819WDiode_SMD:D_SOD-123D1, D2
2PTC500mAFuse:Fuse_1206_3216MetricF1, F2
2USB ESDPackage_TO_SOT_SMD:SOT-23U5, U6
11uCapacitor_SMD:C_0603_1608MetricC3
13V3TestPoint:TestPoint_Pad_D1.5mmTP1
14.7kResistor_SMD:R_0603_1608MetricR17
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U4
1BACKButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW5
1BOOTButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW1
1BuzzerBuzzer_Beeper:Buzzer_Murata_PKMCS0909EBZ1
1CP2102N HostPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mmU3
1CP2102N ServicePackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mmU2
1ENTestPoint:TestPoint_Pad_D1.5mmTP3
1ESP32-WROOM-32ERF_Module:ESP32-WROOM-32EU1
1GNDTestPoint:TestPoint_Pad_D1.5mmTP2
1IO0TestPoint:TestPoint_Pad_D1.5mmTP4
1NEXTButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW4
1OKButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW3
1OLED 0.96in I2Cesp32-serial-deployer-pcb:OLED_096_I2C_Module_1x4J3
1PWR LEDLED_SMD:LED_0603_1608MetricD3
1RESETButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW2
1RGB LEDLED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100D10
1RX0TestPoint:TestPoint_Pad_D1.5mmTP6
1RX2TestPoint:TestPoint_Pad_D1.5mmTP8
1Service USB-CConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1TX0TestPoint:TestPoint_Pad_D1.5mmTP5
1TX2TestPoint:TestPoint_Pad_D1.5mmTP7
1USB-A Pigtailesp32-serial-deployer-pcb:USB_A_Pigtail_Pads_1x4_EdgeJ2

Similar boards

  • 2 layers210 × 297 mmFra clock, the printed circuit board in 3D

    Fra clock

    albertoboffi-PERSONAL/fra-clock

    A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers…

    428 parts
  • 4 layers60.2 × 60.5 mmESP32 FlightController, the printed circuit board in 3D

    ESP32 FlightController

    durveshpathak1989/kicad-local-agent

    Free local Ollama agent for generating and validating KiCad project files

    73 partsMIT
  • 2 layers70 × 55 mmKwl esp32, the printed circuit board in 3D

    Kwl esp32

    hpralfi/comfoair-esp32

    ESP32-Platine, um Zehnder ComfoAir, StorkAir WHR und Wernig G90 über RS232 in Home Assistant einzubinden (ESPHome, ohne Cloud)

    40 partsCERN-OHL-S-2.0
  • 2 layers76.8 × 100 mmProject CV, the printed circuit board in 3D

    Project CV

    KazimGL/ESP32-PowerIoT-DevBoard

    ESP32 battery-powered IoT dev board with Li-ion charging, protection, and sensor support — designed in KiCad

    62 parts
  • 4 layers80 × 54 mmPoket, the printed circuit board in 3D

    Poket

    kaorii-ako/Poket

    ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch

    104 parts
  • 4 layers54.6 × 99.3 mmSH wg, the printed circuit board in 3D

    SH wg

    hatlabs/SH-wg-hardware

    Sailor Hat WiFi Gateway hardware design files

    85 parts3
  • 4 layers23.3 × 28.4 mmDaronjli dongle, the printed circuit board in 3D

    Daronjli dongle

    manhoosbilli1/esp32-bluetooth-erm-accel-dongle-faulty

    ESP32 Bluetooth dongle with ERM haptic motor and accelerometer - FAULTY: wrong ORing circuit, used NMOS instead of PMOS

    56 parts
  • 4 layers29 × 58 mmMini esp32, the printed circuit board in 3D

    Mini esp32

    serialx/mini-esp32

    Mini ESP32 Dev Board

    43 parts

Questions

How big is the Esp32-serial deployer pcb PCB?

It measures 100 × 72 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Esp32-serial deployer pcb use?

51 parts, built around the ESP32-WROOM-32E, AP2112K-3.3, MMBT3904 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-serial deployer pcb KiCad files?

From the lizuyi-6/Networksafe repository on GitHub, at the commit this page was made from: the board is hardware/kicad/esp32-serial-deployer-pcb/esp32-serial-deployer-pcb.kicad_pcb and its schematic hardware/kicad/aetherguard-control-board-v1/aetherguard-control-board-v1-flat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-serial deployer pcb design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).