2 layers129.5 × 50.8 mm
2 layers116.8 × 61 mm
Lilka
lilka-dev/lilka234Схема та документація ігрової консолі Lilka
- Size
- 116.8 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 25
- Pads
- 96
- Tracks, vias
- 199, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2024
- Updated
- 20 Oct 2026
Overview
Lilka is an open-source printed circuit board by lilka-dev, from the lilka-dev/lilka repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 116.8 × 61 mm with 21 parts on 25 nets, routed with 199 tracks and 2 vias.
It is built around the ESP32-C3-WROOM-02-H4 and AMS1117-3.3. Its parts include 9 switches, 3 capacitors, 3 ICs, 3 connectors and 1 resistor. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdЛілка
DIY-консоль, яку можна зібрати з дешевих готових модулів.
Де її можна купити?
Всі посилання та інструкції доступні ось тут!
Демо
Новини про проєкт Лілка V2:
Перша версія Лілки:
Документація
Повна документація проєкту буде доступна ось тут: https://docs.lilka.dev
Спільнота
Приєднуйтесь до нашого сервера в Discord!
Я хочу допомогти писати код!
Ми будемо тільки раді! Є декілька варіантів:
- Хочете написати гру, програму, документацію чи щось таке? Звісно! Документація є тут (C++) і тут (Lua).
- Хочете допомогти з вдосконаленням коду? Виконайте команду
make todo- вона відобразить всі TODO з коду, де потрібна допомога. - Хочете допомогти ідейно? Знайшли баг або маєте ідею щодо покращення архітектури? Створіть новий тікет або пишіть в наш Discord в форум
#лілка.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | A | Buttons:SW_PUSH-12mm-fixed | SW5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B | Buttons:SW_PUSH-12mm-fixed | SW6 |
| 1 | Bat | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Down | Buttons:SW_PUSH-12mm-fixed | SW2 |
| 1 | ESP32-C3-WROOM-02 | PCM_Espressif:ESP32-C3-WROOM-02_no_gnd | U1 |
| 1 | G*** | kibuzzard-65B2D7AF | kibuzzard-65B2D7AF |
| 1 | Left | Buttons:SW_PUSH-12mm-fixed | SW3 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | Right | Buttons:SW_PUSH-12mm-fixed | SW4 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW9 |
| 1 | Select | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | Start | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | Up | Buttons:SW_PUSH-12mm-fixed | SW1 |
| 1 | ~ | Connectors:Charge_Controller_TP4056 | J3 |
| 1 | ~ | Display:TFT_240x280 | U2 |
| 1 | ~ | Connectors:USB_2.0_PCB | J1 |
Questions
How big is the Lilka PCB?
It measures 116.8 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lilka use?
21 parts, built around the ESP32-C3-WROOM-02-H4 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lilka KiCad files?
From the lilka-dev/lilka repository on GitHub, at the commit this page was made from: the board is hardware/v1/main.kicad_pcb and its schematic hardware/v1/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lilka design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from lilka-dev/lilka
1Similar boards
- 2 layers60 × 30 mm
- 2 layers79.9 × 36.2 mm
Desk display
nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
63 parts51 - 2 layers51 × 71 mm
- 2 layers60 × 100 mm
- 2 layers80.5 × 91.4 mm
- 2 layers38.1 × 49.5 mm
Esp32c3-iot client board
74th/esp32c3-iot-server-board
Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.
40 parts4MIT - 2 layers56 × 56.5 mm
NX LSM6DS3
Domiko7/NexaSeis
Acquisition and processing server for the NexaSeis collaborative seismic network
25 parts4AGPL-3.0 - 2 layers20 × 24 mm
Desk display
oltdaniel/PCB_deskDisplay
a small esp32-c3 PCB for an I²C display, NeoPixel and Button for smart home stuff.
16 parts3