
Swadge S2-Devkit
AEFeinstein/Super-2023-Swadge-HW
Swadge devkit for an ESP32-S2 with all the bells and whistles

COFFEE MAKER is an open-source printed circuit board by liammchugh, from the liammchugh/HOPE_CoffeeRoaster repository on GitHub. It is a 2-layer board of 131.4 × 99.7 mm with 55 parts on 74 nets, routed with 453 tracks and 50 vias.
It is built around the ESP32-S2-SOLO-N8, MAX31855KASA+T and PCF8574T. Its parts include 14 capacitors, 12 resistors, 7 connectors, 6 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R10 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C10, C16, C18, C20, C21 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C13, C14, C17 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R6, R7, R9 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D7, D8 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 500mA Fuse | Fuse:Fuse_0603_1608Metric | F1, F2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1, J3 |
| 2 | FerriteBead_Small | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | A0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | A1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | A2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | BC850 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J6 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TL3305A | SW6 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J7 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESP32-S2-SOLO | ESP32-S2-SOLO-U-N4R2:ESP32-S2-SOLO | U8 |
| 1 | HY1602E | Display:HY1602E | DS1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | OKI-78SR-3.3_1.5-W36H-C | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Horizontal | U1 |
| 1 | OKI-78SR-5_1.5-W36-C | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Horizontal | U2 |
| 1 | PCF8574 | PCF8574:SOIC16R | U4 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3305A | SW5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | potentiometer | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |

AEFeinstein/Super-2023-Swadge-HW
Swadge devkit for an ESP32-S2 with all the bells and whistles

0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization

lucapoulos/minimap
See our final report for a technical overview of the demo we presented.


CuriousAvenger/PhantomGambit
Phantom Gambit: Where Chess Comes to Life. The Phantom Gambit is a smart chessboard that can move pieces on its own, letting you play chess hands-free.


ashvin-verma/BigBrainFinal
Final Project for HOPE Fall '22. Low-cost EEG with 4 inputs and filtering.

GuilleGonzzalez/hw-thingcell
Firmware used in this device is fw-thingcell, a custom made firmware implemented using Arduino Home Assistant Arduino library (docs).
It measures 131.4 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the ESP32-S2-SOLO-N8, MAX31855KASA+T and PCF8574T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the liammchugh/HOPE_CoffeeRoaster repository on GitHub, at the commit this page was made from: the board is COFFEE_MAKER/COFFEE_MAKER.kicad_pcb and its schematic COFFEE_MAKER/COFFEE_MAKER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask liammchugh before reusing the design.