

BPS Minion
- Size
- 160 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 226
- Nets
- 209
- Pads
- 755
- Tracks, vias
- 1,543, 223
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Oct 2024
- Updated
- 14 Oct 2024
Overview
BPS Minion is an open-source printed circuit board by lhr-solar, from the lhr-solar/BPS-VoltagePCB repository on GitHub. It is a 2-layer board of 160 × 63 mm with 226 parts on 209 nets, routed with 1,543 tracks and 223 vias.
It is built around the ADS7953SBDBTR, LM321 and BQ7695201PFBR, with the ISO1640BDR-HXY and 1N4448W among its other parts. Its parts include 91 resistors, 62 capacitors, 14 connectors, 12 ICs and 3 diodes.
Main components
5ADS7953SBDBTR
TSSOP-38-40℃~+125℃ 0.5LSB 12 16 1MHz 1uA 2.7V~5.25V 20MHz 71.7dB Multiplexers No SAR Serial port TSSOP-38 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)LM321
SOT-23-50℃~+70℃ 1 2mV 3nA 400V/ms 40mA 430uA 45nA 90dB SOT-23-5 Operational Amplifier ROHSPJSEMIOperational AmplifierBQ7695201PFBR
TQFP-48(7x7)-40℃~+85℃ 100mA 1uA 3~16 4.7V~80V Lithium Battery、LiFePO4 Battery Protection IC、Balancing IC SPI Support 电芯均衡 TQFP-48(7x7) Battery Management ROHSTexas InstrumentsBattery ManagementISO1640BDR-HXY
SOP-8SOP-8 I2C Isolators ROHSHXY MOSFETI2C Isolators1N4448W
SOD-1231 Independent 1.25V@150mA 2.5uA 2A 4ns 500mA 500mW 75V SOD-123 Switching Diodes ROHSGuangdong HottechSwitching Diodes
README
README.mdBPS Module Minion Board
TODO: Fill with useful information
Components
Mouser cart of all the components that cannot be sampled.
Parts
226| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | 10k | Resistor_SMD:R_0805_2012Metric | R11, R12, R14, R15, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +25 |
| 36 | 20 | Resistor_SMD:R_0805_2012Metric | R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68 +20 |
| 36 | 220nF | Capacitor_SMD:C_0805_2012Metric | C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40 +20 |
| 36 | TestPoint_2Pole | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +20 |
| 13 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C7, C8, C10, C13, C14, C15, C18, C19, C20, C23, C24 |
| 6 | TestPoint | TestPoint:TestPoint_Keystone_5005-5009_Compact | TP37, TP38, TP39, TP40, TP45, TP46 |
| 6 | TopConn | Connector_Molex:Molex_Micro-Fit_3.0_43650-0600_1x06_P3.00mm_Horizontal | J6, J7, J8, J9, J10, J11 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R89, R90, R91, R94 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R33, R34, R51, R52 |
| 4 | 47nF | Capacitor_SMD:C_0805_2012Metric | C16, C17, C21, C22 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C61, C62 |
| 2 | 0.47uF | Capacitor_SMD:C_0805_2012Metric | C5, C11 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R9, R16 |
| 2 | 100pF | Capacitor_SMD:C_0805_2012Metric | C6, C12 |
| 2 | 1N4448W | Diode_SMD:D_SOD-123 | D2, D3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R13 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric | R3, R10 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C4, C9 |
| 2 | ADS7953SBDBT | Package_SO:TSSOP-38_4.4x9.7mm_P0.5mm | U9, U11 |
| 2 | BQ7695201PFBR | Package_QFP:TQFP-48_7x7mm_P0.5mm | U2, U5 |
| 2 | Conn_01x24_Female | UTSVT_Connectors:B24B-PADSS-F | J4, J5 |
| 2 | EL3H7 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U4, U7 |
| 2 | ISO1640BDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U6 |
| 2 | LM321 | Package_TO_SOT_SMD:SOT-23-5 | U8, U10 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | TEMPSPIANALYZER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J12 |
| 1 | BMS1OTP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BMS2OTP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | CAN_IN | UTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J13 |
| 1 | CAN_OUT | UTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J14 |
| 1 | Green | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MIC5317-2.5xM5 | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | ~ | UTSVT_Special:PeripheralSOM | U1 |
Similar boards
- 2 layers70.6 × 66.7 mm

- 4 layers95.3 × 62 mm

Processing board
N-Pulse/EMG-HW-MainBoard
This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder
135 partsCC-BY-4.0 - 2 layers90 × 39 mm

Thermocouple Board.PROTO
robherc/Thermocouple_Board
Ultra-fast, Ultra-Precise Thermocouple reading board with SPI and Analog outputs
112 parts1BSD-3-Clause - 2 layers139.5 × 96 mm

- 2 layers101.6 × 120.6 mm

Crush main board
MuddSub/crush-main-board
KiCAD files containing the design and layout of the signal board for Crush.
47 parts - 6 layers140 × 56 mm

Trenz mounted
naturalhazardscience/groundlark
Open source hardware for community-powered citizen science
207 partsMIT - 2 layers90 × 80 mm

Pcb before manufacturing sync
PetterGustafsson/power-supply-tester
Rev D2 twelve-input DC power supply tester: I15 CAD, live ESP32-S3 firmware, display artwork, assembly poster, and build records
142 parts - 4 layers83.3 × 88.1 mm

Bottom PCB
StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol
Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link
124 parts
Questions
How big is the BPS Minion PCB?
It measures 160 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BPS Minion use?
226 parts, built around the ADS7953SBDBTR, LM321, BQ7695201PFBR and ISO1640BDR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BPS Minion KiCad files?
From the lhr-solar/BPS-VoltagePCB repository on GitHub, at the commit this page was made from: the board is BPS-Minion.kicad_pcb and its schematic BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BPS Minion design in my own project?
Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.