
ThermocoupleBoard
robherc/Thermocouple_Board
Ultra-fast, Ultra-Precise Thermocouple reading board with SPI and Analog outputs

Ultra-fast, Ultra-Precise Thermocouple reading board with SPI and Analog outputs
Thermocouple Board.PROTO is an open-source printed circuit board by robherc, from the robherc/Thermocouple_Board repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 90 × 39 mm with 112 parts on 72 nets, routed with 825 tracks and 88 vias.
It is built around the ATTINY1604-SSF, STS40-CD1B-R3 and AP2112K-3.3, with the H11L1, ISO1640BDR-HXY and TSZ121ICT among its other parts. Its parts include 43 resistors, 35 capacitors, 11 ICs, 7 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Ultra-fast, Ultra-Precise Thermocouple reading board with SPI and Analog outputs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1M | Resistor_SMD:R_0603_1608Metric | R15, R16, RX1, RY1, Rz1, Rz2, Rz3, Rz4, Rz5, Rz6, Rz7, Rz8, Rz9, Rz10, Rz11 |
| 15 | 1u | Capacitor_SMD:C_0402_1005Metric | C5, C7, C9, C11, C14, C15, C16, C18, C20, C21, C23, C25, C27, C29, C31 |
| 12 | 10n | Capacitor_SMD:C_0402_1005Metric | C6, C8, C10, C12, C17, C19, C22, C24, C26, C28, C30, C34 |
| 7 | TestPoint_Pad_D2.0mm | TestPoint:TestPoint_Pad_D2.0mm | 0.512V, AIN+, GND2, SCL, SDA, SMPS, VCC2 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R5, R10, R11, R12, R13 |
| 6 | 47R | Resistor_SMD:R_0603_1608Metric | R25, R26, R27, R28, R29, R30 |
| 4 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C13, C32, C35, C36 |
| 2 | 1.024V | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R23 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R6, R17 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 2 | TestPoint_Pad_D1.5mm | TestPoint:TestPoint_Pad_D1.5mm | RX, TX |
| 1 | 0.512V | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24 |
| 1 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 1 | 10 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 2.048V | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 256V | custom:DO-214AA | TVS1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4R7 | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | ADS1246IPWR | Package_SO:PW16 | U12 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | AVR16EB | Package_SO:SSOP28_SS_MCH | U1 |
| 1 | DAC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | DAC_OUT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | DMN2310U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D_Schottky | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | D1 |
| 1 | D_Zener_3v0 | Diode_SMD:D_SOD-123 | D2 |
| 1 | EXP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | H11L1 | custom:H11L1-4 | U3 |
| 1 | ISO1640BDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MCP1501T-20E | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | MCP4726A0T-E/CH | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | RST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | SRF0703-6R8M | custom:0703 | L1 |
| 1 | STS40-CD1B | custom:STS4X | U11 |
| 1 | TSZ121 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U6 |
| 1 | Thermocouple | custom:TypeKSocket | TC1 |
| 1 | Trim-Pot_20k | custom:TRIM_TC33X-2-203E | RV1 |
| 1 | UPDI-0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | UPDI-1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |

robherc/Thermocouple_Board
Ultra-fast, Ultra-Precise Thermocouple reading board with SPI and Analog outputs

anp369/esp12-battery-breakout
Small breakout board with possibility to run it battery powered. Mirror of https://gitlab.com/anphi/esp12-battery-breakout Report errors there.

Autonomous-Motorsports-Purdue/AMP_PCBv3
Files relating to version 3 of the PCB for AMP kart

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware




MuddSub/crush-main-board
KiCAD files containing the design and layout of the signal board for Crush.

naturalhazardscience/groundlark
Open source hardware for community-powered citizen science
It measures 90 × 39 mm and has 2 copper layers, 1.6 mm thick.
112 parts, built around the ATTINY1604-SSF, STS40-CD1B-R3, AP2112K-3.3 and H11L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robherc/Thermocouple_Board repository on GitHub, at the commit this page was made from: the board is PCB/Thermocouple_Board.PROTO.kicad_pcb and its schematic PCB/OutputMCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).