

Lhc esp
Open Hardware respository from Laboratório Hacker de Campinas
- Size
- 48.4 × 35.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 32
- Pads
- 99
- Tracks, vias
- 194, 58
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Dec 2023
- Updated
- 21 Dec 2024
Overview
Lhc esp is an open-source printed circuit board by lhc, from the lhc/Hardware repository on GitHub. It is a 2-layer board of 48.4 × 35.4 mm with 24 parts on 32 nets, routed with 194 tracks and 58 vias.
It is built around the ESP-12E, AMS1117-3.3 and BC547. Its parts include 7 resistors, 5 connectors, 4 capacitors, 3 switches and 2 ICs. It belongs with the ESP8266 boards of this library.
Main components
3ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdDesenvolvimento de HW LHC
Desde a sua fundação vários projetos de HW Hardware abertos foram desenvolvidos no LHC, usando diferentes processadores e ferramentas. Este repositório contém todos os projetos já desenvolvidos no LHC.
Contribua e participe dos projetos com Hardware no LHC
Acesse o nosso forms e se conecte ao time do Laboratório Hacker de Campinas, através da criação de sua conta no forum e conversando com o pessoal sobre os diversos projetos. https://discourse.lhc.net.br
Projetos
2024
- LHCbit

- Venda limitada, pegue a sua placa antes que acabe
- Construindo sua placa em KICAD
- nodeLHC
- nodeLHC-ESP32
Oficinas
Portes
Bibliotecas
Contribuidores
- Leandro Pereira
- Douglas Esteves
- Jorge Guzman
- Manassés Souza
- Marcelo Junqueira
- Matheus Brito
- Estevan
- Pedro Minatel
- Rafael Estevam
- Alexandre Fernandes
- Rodrigo Azevedo
- Gustavo Ortenzi
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 1 | 1N4001 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BTN1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | BTN2 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Cnn_RL | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | DHT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | IO | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | PGM | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | RL1 | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
More from lhc/Hardware
3- 4 layers51.6 × 44.4 mm

- 2 layers24 × 84.5 mm

Lhc tijolo32 board
lhc/Hardware
Open Hardware respository from Laboratório Hacker de Campinas
50 parts6 - 2 layers60 × 41.5 mm

Similar boards
- 2 layers162.6 × 123.2 mm

To print
anorimaki/selfbalancing-robot
A buck converter to generate the 5V power rail would have been a better choice because it would be more efficient (extending battery life) and eliminate the need of a second battery (the circuit could be plugged with…
124 parts2 - 2 layers64.8 × 51 mm

Vscp din m1-wireless p1
grodansparadis/vscp-din-m1-wireless-p1
Application board for VSCP DIN M1 based module that read P1 metering data
31 parts1MIT - 2 layers58 × 50 mm

- 2 layers78 × 47 mm

AgroTron(kicad)
HenryqueFarias16/AgroTron
Projeto de Automação agrícola com microcontrolador ESP12-E
35 parts - 2 layers101.1 × 70.8 mm

ProjektElektronikaV6
Nom27/Projekt-elektronika
Projekt elektroniczny (schemat + PCB) inteligentnego termostatu opartego na mikrokontrolerze STM32, z łącznością WiFi (moduł ESP-12E), pomiarem temperatury czujnikiem LM335AZ, sygnalizacją dźwiękową (buzzer) oraz…
42 parts - 2 layers101.6 × 147.3 mm

Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 2 layers68.5 × 53.3 mm

Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers26.4 × 17.3 mm

Knock homekit v1
andrewngai/HomekitKnock
This repo is the resources for the project on https://youtu.be/X5OxuFtGn0
12 parts17
Questions
How big is the Lhc esp PCB?
It measures 48.4 × 35.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lhc esp use?
24 parts, built around the ESP-12E, AMS1117-3.3 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lhc esp KiCad files?
From the lhc/Hardware repository on GitHub, at the commit this page was made from: the board is Oficinas/monte-sua-placa-kicad/Projeto Referência/lhc-esp.kicad_pcb and its schematic LHCbit/kicad/LHCbit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lhc esp design in my own project?
Its repository states no licence, so its author keeps all rights: ask lhc before reusing the design.