

AgroTron(kicad)
Projeto de Automação agrícola com microcontrolador ESP12-E
- Size
- 78 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 51
- Pads
- 124
- Tracks, vias
- 349, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2020
- Updated
- 30 Oct 2020
Overview
AgroTron(kicad) is an open-source printed circuit board by HenryqueFarias16, from the HenryqueFarias16/AgroTron repository on GitHub. It is a 2-layer board of 78 × 47 mm with 35 parts on 51 nets, routed with 349 tracks and 0 vias.
It is built around the ESP-12E, CP2102 and HLK-PM01, with the IR2110L4, LM1117-3.3 and BC547 among its other parts. Its parts include 9 resistors, 5 capacitors, 4 ICs, 4 diodes and 4 connectors. It belongs with the ESP8266 boards of this library.
Main components
9ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesCP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesHLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesIR2110L4
DIP-14DIP-14 Gate DriversInfineon TechnologiesGate DriversLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)IRF1404ZPBF
TO-220AB-55℃~+175℃ 1 N-channel 120A 150nC@10V 200W 3.3nF 3.7mΩ@10V 4.34nF 40V 4V 550pF TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETsSS-12D00-G3
插件-3P,8.8x3.9mm-35℃~+75℃ 3.9mm 7.2mm 8.8mm Black PC Pin Rectangular Columnar SPDT Through Hole 插件-3P,8.8x3.9mm Slide Switches ROHSSOFNGSlide SwitchesTS-1102-5016
插件-4P,6x6mm-40℃~+85℃ 1.6N 100,000 cycles 24V 25mA 5mm 6mm 6mm Black Round Button SPST Through Hole 插件-4P,6x6mm Tactile Switches ROHSSOFNGTactile Switches
README
README.mdAgroTron
Projeto de Automação agrícola com microcontrolador ESP12-E
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R7, R8 |
| 3 | 1uF | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5 |
| 3 | DIODE | Diode_SMD:D_0805_2012Metric | D1, D3, D4 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R9 |
| 2 | 300V/10A | Connector_TE-Connectivity:Tblock3.10x10mm | J2, J3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1A | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 6N135 | Package_DIP:DIP-8_W7.62mm_SMDSocket_SmallPads | U2 |
| 1 | BC547 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Cp2102 | Connector_Wuerth:Wuerth_WR-WTB_64800611622_1x06_P2.50mm_Vertical | J4 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | FINDER-34.51 | Relay_THT:Relay_SPDT_Finder_34.51_Vertical | K1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | IR2110 | Package_DIP:DIP-14_W7.62mm_SMDSocket_SmallPads | U4 |
| 1 | IRF1404ZPBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | InAC | Connector_TE-Connectivity:Tblock10x10mm | J1 |
| 1 | LED | LED_SMD:LED_PLCC_2835 | D2 |
| 1 | LM1117-3.3 | Package_DIP:R-PDSO-G4 | U3 |
| 1 | LOGO | Logo:hardtron | G*** |
| 1 | SS12D00 | Connector_TE-Connectivity:TE_826576-3_1x03_P1mm_Vertical | SW3 |
| 1 | TS-1102-5016 | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW2 |
| 1 | TS-1102-5016 | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW1 |
Similar boards
- 2 layers58 × 50 mm

- 2 layers61.5 × 48.5 mm

- 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers219 × 135.5 mm

- 2 layers100 × 94 mm

ESP8266 Roomba panel x 3
linlun/HW-ESP8266_Roomba
Kicad schematics of a generic ESP8266 board with interfaces for OLED-display, rotary encoder, Roomba and DC/DC
204 parts2 - 2 layers29.7 × 126.5 mm

- 2 layers90 × 70 mm

Starter x51 USB
ExploreEmbedded/8051_ExploreStarter8051
8051 Design files and sample code for Starter board
50 parts4 - 2 layers180 × 135 mm

Questions
How big is the AgroTron(kicad) PCB?
It measures 78 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AgroTron(kicad) use?
35 parts, built around the ESP-12E, CP2102, HLK-PM01 and IR2110L4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AgroTron(kicad) KiCad files?
From the HenryqueFarias16/AgroTron repository on GitHub, at the commit this page was made from: the board is AgroTron(kicad).kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AgroTron(kicad) design in my own project?
Its repository states no licence, so its author keeps all rights: ask HenryqueFarias16 before reusing the design.